Solid ceramic brick - the main characteristics

Among the most demanded masonry materials, a red single solid ceramic brick with dimensions 250 x 120 x 65 stands out. It is made from clay with the addition of other components, which ensures high material performance. Among them are high density, frost resistance, thermal conductivity and so on.

Due to the fact that this product has certain standard dimensions and weight, this makes it possible at the preparatory stage to calculate the required number of bricks for the construction of a particular object. The known weight helps to organize the question of material transportation, to make the choice of a car depending on its carrying capacity. Ordinary facing bricks have standard sizes; they are usually used for masonry walls. They can build partitions and other structures.

It is classified by type.

• Standard.
• Facing.
• Refractory.

One-and-a-half brick M 125 has a different weight, which depends on the size of the product itself. All these characteristics are determined by GOST 530-2007, and therefore, such material is produced in compliance with the size scale.

• Single. They are used for the construction of load-bearing walls or masonry structures (250x120x65).

• One and a half. This thicker version of the M100 has high thermal conductivity and is heavy, and therefore is often made with voids inside to reduce weight. Its size is 250x120x8.8. There is M125.

• Double. Bulk brick M200 has improved characteristics and has dimensions of 250x120x13.8. There is M250.

Depending on the presence of voids in the body of the brick, its cost also differs. For example, hollow material costs less than solid material because less raw material is required to manufacture. Hollow samples adhere well to each other in the masonry, cement gets into the voids and reliably holds the blocks. At the same time, the density of a full-bodied product is higher.

An ordinary brick has a different weight, which is determined depending on its type. This is also regulated by GOST. Stones M 200 and M 250 and other types can weigh from 3.5 to 4.3 kg. Each manufacturer must indicate along with the dimensions of their products and their weight, as well as other parameters, which simplifies the choice for the buyer.

There are certain reasons that affect the density of the product, regardless of its grade. There are several of them.

• Humidity. The brick collects the main volume of water only when the sample is laid. Subsequently, this parameter may vary depending on the conditions, as well as the place of use of the material. If a stone cannot retain moisture in itself, it means that it allows air to pass through, and therefore a product that absorbs moisture is usually used to equip cellars, basements and sewers.
• Cracks. The natural properties of raw materials are cracking when dry, but with the use of polymer compositions today it is possible to achieve an improvement in the density of bricks.
• Clay grade. From the place of occurrence of raw materials with the same volume, it can have a different weight, which is reflected in the density.
• Red bricks may vary in weight and size, it is a good building material from which you can not only build structures, but also use it for a fireplace or for other purposes. The weight and dimensions of the product are selected in accordance with the place of use. The standard production and parameters of this material make it possible to initially determine the load on the foundation that it will exert, to simplify the method of transporting it to the facility.

Today, different manufacturers make a wide range of ceramic bricks, which can be used for various purposes:

• during the construction of partitions;
• for cladding;
• bookmarking bases and other things.

If we talk about the advantages of this material, then it should be noted that ceramic solid bricks are used more often than other types of building stones.

It has many advantages.

• It is durable and durable.
• Environmentally friendly, frost-resistant, fireproof material.

This indicator is important when choosing a material and determines the number of times that a brick is able to withstand defrosting / freezing. Frost resistance is indicated by the letter F, and the class is assigned after testing in laboratory conditions.

In accordance with DSTU B V. 2.7-61-97, the stone that will be used for cladding must have a grade of at least F 25, and therefore it is worth paying attention to this factor when choosing. Of course, it is also important that the frost resistance index is slightly higher, but this will affect the cost of the product.

This parameter speaks about the efficiency of heat conservation by brick in the room. Thermal conductivity is provided by the structure of the product and the presence of voids in the body. It is important to take such indicators into account when erecting load-bearing external walls in order to determine the need for additional insulation. The presence of voids in the brick body makes it possible to reduce heat loss and reduce the layer of additional insulation.

This is the main characteristic that is taken into account when choosing a brick and affects its weight and strength. Bricks without voids are usually used for the construction of load-bearing walls, and products with voids are used for the construction of partitions and other works.

Despite all the positive qualities of ceramic bricks, it also has certain disadvantages that must be considered when buying. The main disadvantage is that this product cannot be used for finishing or facing bases, since it does not have a beautiful appearance, therefore, when using such a material, it will be necessary to additionally plaster the surfaces or treat them with other decorative compounds.

Despite such disadvantages, ceramic bricks are widespread and popular, as they can withstand quite heavy loads. It will not lose its characteristics and parameters throughout the entire period of use, and if necessary, it can be easily dismantled and transported to another place for the construction of other facilities.

As you can see, this material has certain advantages and disadvantages, which must be taken into account when choosing. It is advisable to work with him with experience in masonry, since work may not justify expectations with the wrong approach.It is very important for the construction of various structures to seek help from specialists who will not only help to lay out the walls, but also make all the necessary calculations so that the structure can stand for a long time.

See below for more details.