Brick Fight: What Is It And How To Use It?

Building materials are different. Brick occupies an important place among them. However, with all its many advantages, the material is easily damaged. This means that you have to use broken brick mass.

Brick break occurs as a result of:

• demolition of old buildings;
• overhaul and reconstruction;
• allocation of low-quality products at brick factories;
• mistakes when performing masonry work.

In recent years, the volume of broken bricks has been steadily increasing. The number of old houses being demolished is increasing. It is inconvenient and economically inefficient to dispose of such waste, as has been the practice in previous decades. Therefore, the wreckage is increasingly sent for recycling. As a result, broken brick literally takes on a second life.

A batch of bricks just released from the factory can be different in purpose. After grinding, the secondary raw materials have all the key characteristics of the original product. Ceramic bricks absorb relatively little water. It tolerates frost well and has an excellent density. If initially the brick contained voids, the specific gravity of secondary raw materials reaches 1400 kg per 1 cubic meter. m, if it was solid - it increases to 2000 kg per 1 cubic meter. m.

Chipped silicate material does not survive the cold well, in addition, it easily absorbs water. The specific gravity of hollow silicate scrap is from 1100 to 1600 kg per 1 cubic meter. m. For a whole product, these indicators vary from 1800 to 1950 kg per 1 cubic meter. m. If originally the brick was chamotte, it remains refractory. At the same time, liquid water and water vapor hardly penetrate inside.

But the gradation is not only according to the origin of the brick scrap. There is also a division by size. If only particles no larger than 2 cm in diameter are present, the product is called fines. Anything more than 2 but less than 4 cm is already the middle fraction. The largest brick scrap has dimensions from 4 to 10 cm.

For ease of use, the fractions are separated and supplied to consumers separately. But you cannot immediately sort the recyclable materials by size. Before sifting through special sieves, you still need to free it from all unnecessary inclusions. It is important to note that this is only a product that is processed industrially. Anyone who builds a house on their own can even use an uncleaned brick fight.

There is no doubt that when buildings are dismantled, secondary raw materials are obtained at a bargain price. There are no other aggregates that are so economically beneficial. The scrap brick itself does not catch fire, does not support an already developed fire, it can even become an obstacle for it. This material retains heat well, prevents the spread of extraneous sounds. It also surpasses in strength the best varieties of oak wood and aerated concrete.

During the construction process, brick fighting can be used in any weather. In this respect, it is also superior to natural wood. If you put the prepared debris in the ground, they will provide adequate drainage. Therefore, it is very useful to use them in damp and waterlogged areas.Since the production and processing of bricks guarantees its environmental safety, this material can be used even in the construction of housing.

Brick fighting is used in the construction of local highways. It makes an excellent base for the main surface, the best result is achieved in swampy areas. When it comes to making an asphalt mass, brick chips of certain fractions may well be introduced into it. And during the construction of temporary (used only in winter and autumn) roads, you can build them entirely from broken bricks. Ceramic chippings can also be used for paving roads in gardening partnerships, for filling holes and ditches on highways.

Secondary raw materials can replace high-grade asphalt in the construction of roads serving construction sites. Access roads of this type are capable of serving for several years. When the time comes to create a full-fledged road, the previously laid broken brick will be a good foundation. If you lay out the track with broken clinker, it can normally exist for up to 10 years, and even more where the traffic load is low.

Broken brick can be used in the country. It will help strengthen steep slopes and reduce the risk of landslides. It will come in handy for a drainage ditch. In this case, the material is used to create the underlying layers. A similar effect is achieved when laying engineering systems of various kinds. Brick fight is widely used in landscape design. Often, instead of rubble, it is poured, for example, into the base of an alpine slide.

However, there are other uses as well. Broken brick will help:

• lay out beautiful banks by a dry stream;
• decorate flower beds;
• create a framing of garden paths.

To make a path, use fine fractions. With the help of large and medium-sized fragments, unique ornaments are formed. This is done by pressing the crumb into the compacted mass of sand. In some cases, it is replaced with concrete mortar. It is recommended to use fragments of hyper-pressed or clinker bricks. Ceramic bricks of high grades will be a worthy substitute for them in terms of strength.

Brick breakage can be added instead of rubble to concrete and concrete mixes (albeit partially). It is worth noting that such concrete will not be of particularly high quality. However, it can be used if the building being built is not too important. In this case, special requirements must be observed:

• use only ceramic scrap;
• lay it closer to the middle of building structures (this way the absorption of moisture is less affected);
• split large pieces to pieces of medium and small size;
• replace with recyclable materials a maximum of 30% of crushed stone (otherwise the strength will be unreasonably low).

If there is an unnecessary crumb of silicate brick left, you can fill it with cavities inside the walls (with the well masonry method). This increases the thermal and acoustic insulation of the building. Also, broken brick is used as a filler for the external blind area. And if you break chamotte, it will become an excellent filler for fire-resistant mortars. For this purpose, various fractions of chamotte scrap can be used.

You can add a brick fight to the foundation. At the same time, laying out only from it, even the bases for one-story residential buildings, is not allowed. But the secondary outbuildings quite allow you to do this.Sometimes the post under the fence is simply covered with brick scrap. Then the backfill is rammed and poured with cement. This solution has long established itself as simple and reliable.

A brick break can be used to raise a site if it is located in a lowland. If it is necessary to level the base of the pit, only fines material is used. Those who have the ability to export heavy loads should look for offers for free transfer of broken bricks. Such ads are submitted by many developers who are demolishing entire neighborhoods and neighborhoods of old houses. It is more profitable for them to transfer recyclable materials free of charge than to take care of their export and disposal on their own.

For information on how to make a path from a brick battle with your own hands, see the next video.