Features and tips for using saws for metal

Metal processing on an industrial scale is carried out using special machines. But in domestic conditions and even in a small workshop, it is advisable to separate the workpieces using saws. To do this effectively, quickly and safely, you need to find out all the characteristics of metal saws, as well as the subtleties of their use.

Any experienced specialist, especially an engineer, can easily distinguish between saws for wood and metal. For machining steel, only fully enclosed tools are used. Inside it, a special channel is made through which metal shavings pass. To guarantee the safety of the operator, designers carefully select the speed of movement of the working parts. The direction of the teeth on the blades and discs of such saws is always the same - "away from you". This difference makes it possible to accurately identify the correct tool.

In a cut-off saw designed to cut steel, the main work is performed by a toothed closed belt. For its manufacture, the so-called high-speed steels are used. Hacksaw systems are equipped with a straight blade, rigidly fixed during operation. The sawmill drive is made both manual and electromechanical. Hacksaw machines are in demand in small industrial enterprises and in workshops for preliminary metal blanking.

Circular saws are more complicated. They are always collected in the place where the platform can be installed. Depending on the nuances of the design, such products can have a rigid or movable base. All components can be dismantled. To prevent the workpiece from moving during operation, it is clamped in a vice with an emphasis. The cutting attachment in the form of a disc is made from carbide or high-speed steel grades.

In any case, both the disc and the blade or cutting wheel must be driven. Electric motors are used for this purpose. They are connected to the working elements through belt or gear drives. The second option is preferable on powerful stationary saws. If the saw for metal is relatively small and mobile, most likely, a belt drive will be put on it. Sometimes 2 cutting discs are installed at once - this raises the overall performance of the saw. Moreover, a tool with a pair of cutting elements is often capable of automatic operation.

Despite the increasing mechanization of a number of industries, the role of hand-held metal-cutting tools should not be underestimated. Usually rapite hacksaws, cutting steel, are made with a thin and narrow blade. If the hacksaw is for machine cutting, the blade will be slightly wider. In hand tools, cutting teeth can be on one or both sides. For the manufacture of teeth, only heat treatment is carried out, all other metallurgical manipulations threaten to break the blade.

The manual device is 100% independent of electricity and can work even when there is no gasoline. Additional advantages are low cost, lightness, compactness, safety and unsurpassed material processing accuracy. The basis of the structure, as well as many decades ago, is a frame in the shape of the letter "C", as well as a canvas fastened with screws.With good products, the handle is oriented at right angles to the canvas. As a result, the pressure energy is distributed evenly.

The mechanical saw for metal used in industrial plants can be very different in design. But in domestic conditions and in small workshops, other options are more popular. These include:

• pendulum miter saws;
• assembly saws for metal processing;
• saber tool;
• mini-machines of the strip scheme.

First of all, it is worth taking a closer look at the saber saws. By changing the canvas, you can use them for processing both metal and wood. The specially thought-out geometry of the elongated blade allows you to work successfully even in hard-to-reach areas. The designers took care of both the speed control and the platforms with which the stop is provided.

The problem with reciprocating saws is that they are not very accurate. And the power of such equipment is not always sufficient. The pruning saw is useful if you need to make very precise cuts along or across. A disc made of steel or abrasive materials is used to cut the material. An important characteristic of a circular hand saw is the depth of the cut to be made.

Large saws of this type are capable of very high productivity. Other factors should also be considered:

• the possibility of a smooth start;
• ergonomic handle;
• overheating protection efficiency;
• limiting speed of rotation of the disk;
• devices that ensure the safety of the operator.

The pendulum miter saw is always a stationary device. It is supplemented with a special disc. The difference with the saber installation is that work in hard-to-reach places is not even considered. But it is possible to process both metal and wood very precisely. Band saw machines can be used for both household and industrial purposes.

With their help, it is easy to cut metal in almost unlimited quantities. In any case, it will be enough for a household. The band saw machine consumes little energy and is safe to use. It can process even extremely hard alloys efficiently. But to get the best result, you will need to carefully assess how much work needs to be done and how difficult it will turn out to be.

Experience has shown that the tool turning function is of great benefit. At home, the use of manual or semi-automatic band saws is recommended. The less vibration during start-up, the easier it will be to make a precise, aligned cut. Circular saws are designed for cold cutting of metal. Most often, in this case, discs with different inserts are used. If performance is critical, it is worth choosing mechanisms that can handle batch cold processing.

The best segments are obtained from high speed steels. At the same time, the disks themselves are made of carbon alloys with an increased amount of manganese. Particular attention should be paid to the so-called rapite cutters. They are made of a special material that is carefully tempered. The result is a very high quality product with excellent performance characteristics.

The scope of the knife is very wide. However, the flip side of high hardness is significant fragility. Sharpening will take a long time after thoroughly blunting. A vertical band saw is another useful technique. Its key characteristics are:

• total power;
• cutting speed;
• severity;
• functionality;
• magnitude;
• range of workpieces to be processed.

The cost of the device directly depends on these parameters. In comparison with pendulum disk devices, they are much more reliable and are distinguished by increased durability. In most cases, the pace of the belt can be varied.Differences in vertical band saws are related to the level of blade tension and the capacity of the hydraulic reservoir. For mobile band saws, the power reaches 2500 W, for stationary ones, it only starts from this figure.

The metal milling saw is used almost exclusively in industrial environments. It is needed where special processing precision is relevant. The qualifications of the performer are of great importance for a positive result. A circular (hole) saw, on the other hand, is much better suited for metalworking at home. She is capable of sawing a wide variety of materials.

If a saw is purchased exclusively for sheet metal, it is worth giving preference to the circular option. The basic principle of operation of such a tool is the same as that of angle grinders. The machine can be used to cut:

• metal rods;
• fittings;
• pipes.

Czech metal saws show very good results. The diameter of their working part can be any - it depends on the needs of a particular customer (most often - from 300 mm). Experts recommend using Bomar machines. You can also take a closer look at Pilous-TMJ products. Thus, the ARG 105 Mobil consumes 550 W, is capable of working at angles from 45 to 90 degrees, the recommended mains voltage is 380 V, and compatible discs can be up to 25 cm in diameter. This year, the best assembly saws are:

• Metabo CS 23-355;
• Makita LC1230;
• Elitech PM 1218;
• DeWalt D282720;
• AEG SMT 355.

First of all, you should pay attention to the quality of cutting of the material and the presence of a smooth start. The total power and the number of revolutions are also important. The higher these indicators, the more efficient the work will be. The comfortable handle is of great benefit. When looking at the reviews, you must first of all look for information about the permissible load level and the duration of continuous work.

Rechargeable attachments with lithium-ion batteries are preferred for indoor use. If you intend to use the device outdoors, then it is advisable to choose the option with a nickel-cadmium battery. When evaluating power, one must not forget that as it grows, the saw becomes heavier and more voluminous, and its cost rises. Reciprocating saws are significant:

• passes per minute;
• the scope of movement of the canvas;
• cutting depth.

Before starting the band saw, the blade must be installed. In this case, it is imperative to check whether the teeth are directed in the same direction as the course of the blade. If the direction is opposite, then a rupture is likely. The guiding elements should not obstruct the movement of the webs. Both blades and discs are always selected for specific purposes and materials, and the distance from one tooth to another should be approximately equal to the size of the workpiece.

Most often, the workpieces are clamped in a vice. We need to check if the commit is reliable. In mechanized devices, a continuous supply of lubricant is required. Newly installed canvases are first run in (run in). The slightest cracks are unacceptable. If they are found, as well as if the teeth are twisted or blunt, the defect must be immediately eliminated.

There are such mandatory rules:

• checking the saw before starting work and after it ends;
• grounding of all electrical wires and housing, working parts;
• keeping the workplace clean and tidy;
• mandatory use of protective screens;
• wearing overalls;
• use of earplugs for prolonged work.

For information on how to choose a saw for metal, see the next video.