Choosing and using oil for an electric saw

Electric saw oil is perhaps the most important and necessary consumable. It is he who has a positive effect on the operation of the instrument. Good oil greatly simplifies the operation of this device. With it, the cutting blade is in better contact with materials with different structures. In addition, thanks to this consumable, the tool can last much longer.

Let's figure out how to choose the right oil for your electric saw.

Many owners of electric saws ask a reasonable question, why does this tool need oil. The answer is simple - this tool is used as a lubricant for the chain in order to neutralize the impressive force of friction between individual parts. Due to the presence of oil, important elements of the device do not suffer from excessive heat, in contact with each other.

With good oil applied on time, the saw will not only run more efficiently and lighter, but also last longer. Equipment deprived of such maintenance is subject to very serious breakdowns. It is unlikely to last long.

On the modern market, there are several options for oil intended for processing chain saws. These formulations can be mineral, synthetic, or semi-synthetic based. It should be borne in mind that the latter contain both synthetic and mineral components. Another category of modern chain oils for electric saws from different companies is represented by products based on raw materials of plant origin. Of course, each group of oils has its own advantages and disadvantages.

If we consider the properties of all oils in terms of stability and the ability to operate effectively in rather difficult conditions, then, of course, in the first place are synthetic products. They are able to keep electric saws running even in very cold weather. (up to -40 degrees). However, these types of oils have one important drawback that must be taken into account - they are expensive. This is why many consumers are abandoning their purchase in favor of more affordable options.

As for the popular mineral oils, they are several times cheaper than synthetic options.... However, their performance characteristics are very inferior to the characteristics of the above compositions.

Semi-synthetic oils are a cross between synthetic and mineral products. These types of oils are produced for both electric and gasoline devices.

Today, it is not difficult to find the lubricant for the saw chain. Such products are produced by many well-known brands. The main thing is to choose the right composition, knowing about the optimal performance characteristics.

As mentioned above, there are many brands of modern saw oils. Among them there are both little-known and very popular ones. If you decide to purchase high-quality and reliable saw oil, then you should familiarize yourself with the list of the most popular models.

This oil is in great demand and has excellent adhesion properties. Forest plus is characterized by the fact that it can be operated if the temperature outside the window is at least -15 degrees.

The company's products called Bio Plus are plant-based. Oils of this company, when penetrating into the soil, very soon begin to decompose. Not every oil can boast of such a distinction. It is permissible to use this product at temperatures up to -15 degrees, like the previous version.

This equally popular oil is made on the basis of synthetic components. It can easily endure a fairly serious load on the equipment.

Because of this, the oil will not stop acting and flow to the desired nodes.

Champion adhesive oil is usually used for work with a fairly wide temperature range. This grease is sold in containers of 3 and 10 liters. The product is inexpensive and easy to use.

The name of this world famous brand inspires trust. Husqvarna Saw Oil is the most cost effective and economical solution for lubricating your electric saw mechanism. These products are characterized by moderate consumption and high efficiency.

Whether it is permissible to use engine oil as a saw lubricant is another common question from tool owners.

It should be borne in mind that such compositions are suitable exclusively for specific saw models.... The fact that the tool can be lubricated with engine or transmission oils must be indicated in the technical documentation attached to the equipment.

Not suitable for chain lubrication and common vegetable oils... Of course, they will have a short lubricating effect, but it is worth remembering that such compositions have a characteristic property - they dry out. Subsequently, this can lead to the fact that the chain will move very poorly in the mechanism, with delays. Because of this, the performance of the saw as a whole will noticeably deteriorate, therefore it is not recommended to experiment with vegetable oils in relation to this technique.

If you want your electric saw to serve for a long time and not give you any trouble, then you should choose high-quality oil for it. This issue should be approached very seriously, because the condition and performance of not the cheapest tool will depend on your choice.

There are several basic criteria to consider when choosing a lubricant.

• As stated above, engine or transmission oil may only be used if permitted by the tool manufacturer.Open the instructions - there should be a point about the permissibility of using such oils. Also, do not use only mineral formulations. Engine oil can not only lubricate the chain, but also clean the various systems in the device.

• It is advisable to buy a specialized lubricant for electric saws from different companies. On sale you can find many options for such compositions. Often, both saws and oils are made by one manufacturer. It is worth purchasing formulations with good adhesion properties. These oils will not slip off the chain while the saw is in use. In addition, the composition must be branded.

• Some people turn to used engine oil when caring for their electric saw. It is important to know that such a composition is extremely contaminated. Therefore, it can heavily pollute the entire system, and with it the circuit itself.

Choosing the right saw oil is not enough. You also need to know how to properly pour it into such a technique.

So, modern models of electric saws are equipped with a special well thought-out system for the automated supply of lubricant to the necessary units, where friction occurs during the operation of the tool.

If your toolbox has such a technique, then you don't have to come up with anything superfluous. You just need to carefully pour the selected suitable oil into a specially designated container. After that, it is worth letting the device run for just a few seconds, but without load (the saw should operate "idle"). During this work of the technique, the lubricant will "disperse" as evenly as possible along the entire length of the chain.

In this case, it is permissible to use brushes or a grease gun for lubricating an important unit of the instrument. Compositions in special aerosol-type packaging are most suitable for such purposes, they are very convenient to use.

Many owners of electric chain saws are faced with the fact that at some point the oil is no longer supplied to the required component of the tool. It is worth considering that such a problem can ultimately lead to more serious troubles.

This can be due to several factors.

• If you notice that the oil is not going to the tool chain, this may indicate that the oil pump and its gears may have failed. It is advisable to notice such breakdowns on time.
• This may also happen due to a serious blockage of the passages in the oil filter, through which the lubricant passes to the chain of the device.
• Also, this trouble often arises due to clogged holes in the tire.
• If the oil container is depressurized, then the indicated problem will happen inevitably.

It is important to keep in mind that under conditions of increasing engine speed, the pumping speed of the lubricating composition also increases significantly. That is why it is required to pour the oil mixture into the electric saw only if the engine is turned off.

You should buy lubricants for the electric saw chain exclusively at specialized retail outlets. Only such products are of high quality and effective. You shouldn't buy goods in markets or street stalls.... Most likely, they will sell you a fake there, which will not only turn out to be useless, but will also lead to a breakdown of the instrument.

There are a lot of oils on sale. But the best option is an oil with good adhesion properties... These products contain special additives. Thanks to the latter, the composition does not shake off and does not flow off the saw chain as it actively rotates. Only such a remedy will be effective and will have a beneficial effect on the condition of the instrument.

You will learn how to choose oil for your electric saw from the video below.