Features of ice saws and their selection

The ice saw can be used in a wide variety of situations. For example, many fishermen use this tool to cut holes or large-area holes to use set nets. The ice saw is often used by EMERCOM employees and scuba divers.

The operation of this equipment has its own characteristics. For example, the smooth operation of a chainsaw is ensured by an air injection system. This also increases the service life of the tool, as the saw wears out much more slowly. The shape of the device itself is quite convenient, so the cutting process is quite easy and quick. For heavy loads, the installation provides for a three-section crankshaft. Ice can be cut with any chainsaw, but in each case the rule must be observed - do not use oil.

When choosing a saw for cutting ice, you should familiarize yourself with the various options for household saws, since each of them is designed for a certain volume of work, has its own advantages and disadvantages. There are several types of saws that can be used to cut the ice sheet.

• Handmade Finnish. The advantages of the instance include lightness. Ice masses up to one meter thick can be cut. Among the minuses, it is worth noting the low speed of work when compared with a gasoline tool. But if we compare the speed of work on metal or wood, then such a saw will cope with ice much faster. As well as hand-held Finnish saws, which are recommended for cutting out polynya or myna, can be divided according to the following criteria:
  1. a tool with a wooden handle is an environmentally friendly accessory, it fits well in the hand, it is easy for them to work;
  2. a saw with a metal handle - compared to the above option, this is a more durable version.

• Chainsaw. This is a fairly convenient option to work with. Sawing a hole in the ice is simple and quick for them, but this variety has the following disadvantages:
  1. it is possible to work only with a thickness of no more than 37 cm;
  2. during the cutting process, a lot of ice splashes get on the saw, which is fraught with icing of the tool and malfunctioning;
  3. this weapon is quite massive.

For ice masses of short length, a standard household chainsaw is also suitable, and for larger volumes of work, you should choose a professional tool. It is worth considering the most popular models.

• Stihl MS 661. This unit has a capacity of 7.3 liters. with., and this is quite enough for cutting ice. The base tire is 71 cm.

• Chainsaw Stihl MS 880. It is recommended for a thickness of 90 cm. This is the most powerful model. If this length is not enough, then it is allowed to install a longer tire - Rollomatic ES 0.404 ″, but judging by the opinions of experts, it is rather difficult to find such a tire.

• Husqvarna 395 XP. The length of the tire is 106 cm. According to professionals, this is a very convenient, powerful and efficient unit.

Before you start cutting the ice, use the following tips for using your chainsaw:

• you do not need to use oil because it reduces friction and can also pollute the pond if fish are grown in it;
• it is recommended to carry out the work process with the tip of the tire, avoiding contact with water;
• after sawing, the tool should be thoroughly wiped and dried, and then lubricated with the chain, sprocket and tire;
• do not forget about personal safety measures - wear a waterproof uniform, stock up on a plywood shield, since a lot of water and ice crumbs flies when using a chainsaw.

For an overview of the Finnish saw RAPALA, see the video below.