Flap grinding wheels for grinder

Flap discs are used for initial and final processing of objects. Their grain size (size of abrasive grains of the main fraction) is from 40 to 2500, abrasive elements (abrasives) are synthetic corundum and zircon, and the diameter is from 15 to 500 millimeters. The maximum quality of the wheels creates the conditions for minimum vibration and good productivity of the equipment. This tool shows good results when processing thin sheets and sturdy materials, interior space and seams. They are used for technical support of hand tools and static equipment, for straight-type machines and angle grinders.

Lobe nozzles are excellent for cleaning iron from paint or rust, grinding seams, welding and removing scuffs when processing metal by cutting or stamping. They are also used in the preparation of wood for applying paint or varnish. The principle of operation of different discs is the same - removal of the top cover of the material by means of an abrasive applied to the base. Manufacturers produce a wide variety of abrasive discs exclusively for surface polishing and face grinding, and modifications are also available to clean internal, hidden voids. The petal disc has excellent plasticity.

Flap wheels are recognized by the size of the abrasive. The grit size of the sandpaper on the wheel is different. There are a number of typical grain sizes - 40, 60, 80, 120. According to domestic regulations, the larger the number, the larger the grain size. On the contrary, according to foreign standards, a large figure is equivalent to a finer grain size. When purchasing a disc, one should not forget that with a large grain size, the grinding will be coarser, and the plane being processed will be rough.

A number of grinding wheel options are available. Let's analyze the most popular ones. End flap disc (KLT), intended for processing elements made of iron, wood, plastic. The main working area is the edge of the circle. Wheels with a grain size of 500 and a diameter of 115-180 millimeters are produced, especially a running wheel - 125 mm. The size of the seat is 22 mm. Can be used up to deep working. It is used for both primary processing and final stripping. There are curved and even disc modifications, which makes it possible to change the depth of the formation intake. Ideal for surface treatment prior to paint application.

There are 2 options for KLT:

• straight, for large areas when grinding planes and mating flat surfaces;
• tapered, for grinding seams, edges and butt joints.

A folded circle (KLS) or a petal packet (KLP) is produced in the form of an iron base with a large number of fragments. The product is suitable for a wide variety of materials, including metal and plastic. The maximum diameter reaches 500 millimeters, it is used for mechanical and manual processing of planes, the size of the landing socket is from 30 to 100 millimeters. Abrasive grain size - up to 500.These circles are intended for processing large planes. The variable speed option provides excellent surface polishing results.

A vane disc with a mandrel (KLO) contains a mandrel in its structure, by means of which it is mounted into the tool. Practiced for sanding interior surfaces. The extensive scale of typical sizes makes it possible to select a sample for any area of ​​the elements to be ground. The size of KLO abrasive grains ranges from 40 to 500, diameter - from 15 to 150 millimeters. This wheel model makes it possible to achieve a good level of grinding.

Flap disc for angle grinders (angle grinders, grinders). This flap disc is created directly to mount to an angle grinder. The diameters of the discs are different, from 115 to 230 millimeters, including a disc with a petal structure for a small angle grinder. The choice of the diameter is carried out in proportion to the typical size of the tool. The ideal discs are for a 125 mm angle grinder. The diameter of the landing socket for especially demanded models has a standardized parameter - 22, 23 millimeters. The thickness of the circle near its middle is from 1.2 to 2 millimeters, taking into account the dimensions of the circle.

An abrasive disc for an angle grinder for metal is divided into independent sectors - petals, hence its name. The petals are covered with a thin layer of crumbs made of synthetic corundum of zirconium electric arc melting, fixed to the base by means of epoxy. A promising innovation was the latest development of Russian specialists - a circle with a sputtering of small particles will defeat the electric pulse grinding technology, fixed by an extremely strong soldering, which increases the service life.

If you need to process a large number of wood surfaces, for example, preparing a floor for painting or reconstructing the front of a house made of wood, such a device as an angle grinder is ideal. In such situations, practice a disc with a petal structure for an angle grinder for wood, made of petals with an abrasive dust, fixed on a solid base, lined with an overlap, closing the previous one by 3/4 of the length.

Wheels differ in the size of the abrasive, which is indicated on the product. Disks are classified by purpose. To remove roughness, discs with a small grain are practiced; to eliminate medium roughness and old color, a disc with a large grain size is needed. The size of the circles is from 115 to 180 millimeters, including 125 millimeters.

Discs, depending on the size of the abrasive, are able to quickly remove an uneven layer, while the plane is made rough. You can also completely remove all irregularities with a small layer of removed material. It is considered correct to alternate the use of circles with a large and small grain. The hardness of the disc makes it possible to apply more force when cleaning to enhance performance.

When sanding objects made of wood, of non-standard design, circles are used in which the emery strips are located along the radius. But the use of such tools presupposes the presence of certain skills. Initially, you need to develop the clamping force and the degree of inclination of the device.

Metal is grinded for different needs. As a rule, it is processed for painting or for subsequent polishing. The selection of a disc depends on the degree of grinding and on the technical condition of the metal. Only part of the wheel needs to be used during the grinding process. There should be no uncleaned areas on the surface. It is recommended to prime the treated surfaces.The moisture present in the atmosphere can quickly cover steel and provoke corrosion.

When buying a wheel for a grinder, these aspects are important.

• The diameter of the circle should correspond to the maximum possible for a particular device. In a different development of events, the consumable is capable of falling apart due to exceeding the maximum allowed rotation speed. The tool life may not be sufficient to rotate a large disc. When using a large disc, the safety guard must be removed, and this is unsafe.
• It is recommended to choose special wheels - universal, for example, for wood.
• It is worth considering the maximum permissible linear speed, information about it is applied to the container or the side surface of the circle. The operating mode of the angle grinder is selected in accordance with this indicator.

A large selection of disks of various types for an angle grinder makes it possible to carry out many tasks. From the list provided by the manufacturers, it is only necessary to select the appropriate configuration, material, and diameter of the circle. At the same time, it must be remembered that a high price is associated with the highest reliability of the disk, and therefore, with an increase in the service life of the device many times over.

For more information on flap wheels for the grinder, see the video below.