All about AEG grinders
The German company AEG has been manufacturing electrical products for over a hundred years. Her products consistently show themselves from the best side. This fully applies to angle grinders.
Models WS 8-115 and WS 12-115
This mains powered machine is capable of excellent performance in a variety of jobs - sanding, sanding and cutting. Along with the application in the construction and repair industry, it can be used in other areas. A disc with a diameter of 115 mm is able to penetrate 3.5 cm into the material being processed. The operation of the device does not present any particular difficulties.
The gearbox for the WS 8-115 is made of first-class tool steel. A spindle lock is provided, and the auxiliary handle makes it easier to hold the tool during operation. The grinder AEG 12-115 of the same series can be successfully applied:
- when cutting various objects;
- as a grinding tool;
- as a tool for cleaning hard surfaces.
A disc with a diameter of 115 mm can go 4 cm deep into the material. At the same time, its rotation speed reaches 11,500 turns per minute when it comes to no load mode. The casing of this angle grinder effectively covers the operator. A spindle locking function is provided, as well as effective cooling of the built-in motor through special holes.
Cordless versions
Noteworthy is the AEG Bews 18-125X-0 cordless grinder. She is able to cut a variety of objects and products, as well as successfully grind them. Almost complete independence from power supply significantly increases the mobility of the device. But if this feature is inherent in all battery models, then the ergonomics and lightness of the grinder are the result of the painstaking work of German engineers. They also provided effective protection against various overloads, creating a machine with the longest possible service life.
The outer diameter of the disc is 115 mm. At the same time, it can cut through the material to a depth of 2.8 cm. The designers took care of the charge indication, the anti-vibration properties of the side handle. Replacing discs when needed is very easy. Removing and returning the casing to its place is done without a key.
An alternative solution could be AEG Bews 18-125X LI-402C. Engineers have specially designed this model so that it can be used successfully in a wide variety of conditions. The manufacturer claims that cutting and grinding is done at a very high level with the machine. The lightness and compactness of the mechanism simplify its use, as well as the absence of special design differences from other similar products.
Like the previous model, the angle grinder is capable of making cuts up to 2.8 cm deep. Likewise, easy disc changes are guaranteed. The charge level is shown by a special indicator. The auxiliary handle enhances the working comfort. A convenient case is included in the package.
Important nuances
Quite a few consumers are interested in the bore diameter of the protective casing. Standard dust covers for each model of the German company are selected specially. For greater convenience, the description of the versions of protective devices always mentions which modifications they are suitable for. So, dust covers for AEG AVA 125A-1 are also suitable for WS12-125XE, WS13-125XE and other versions with the same type of attachment. The company warns that the casing should be used for absolutely any work with the grinder; if it does not apply, all warranty claims are void.
A standard protective product not only stops dust, but also prevents other harmful influences. The hose of a construction vacuum cleaner must be connected to the nozzle. The described nozzle allows the use of discs up to 125 mm (that is, if the disc is smaller, there will be nothing wrong with that). The recommended hose diameter is 40 mm. If it is different, you will have to install an adapter.
Experts definitely recommend purchasing angle grinders with speed control. They are much easier for conventional models to adapt to various tasks. An example of such a device is the AEG WS13-125XE. On this grinder, you can put an anti-vibration handle on both the right and left of the body. The casing of this model is made in a swivel format; switching it from one position to another is done manually.
The power of this angle grinder reaches 1300 watts. Nozzles with a diameter of 125 mm are placed on it. Provided for the most smooth start-up and quick clamping nut. The turnover control is implemented using an electronic device. The grinder of the described model can work on stone and concrete, but it is not protected from accidental starting.
The mass of the angle grinder is 2.4 kg. The number of turns per minute can reach from 2800 to 11500. This is enough to work effectively in a variety of modes. The cover is designed for keyless removal and return. Fitted with washer and FIXTEC quick release nut.
Angle grinder model AEG WS15-125SXE DMS 4935455130 shows itself very well both when cutting, and when grinding, and when cleaning metal products. However, this also applies to products made from other materials. The auxiliary handle, at the request of the consumer, is placed both on the left and on the right. The designers took care of a smooth start. The power of the angle grinder is 1520 W, while the disc can rotate at a speed of 2600 to 11,000 revolutions per minute.
As in other models, flexible speed control is provided by an electronic device. The quick-locking nut is available in SDS format. The grinder can handle both stone and concrete. A system for preventing accidental starts is built in. But it is important to take into account that the position of the casing cannot be changed without a special tool.
WS15-125SXE DMS 4935455130 does not block the spindle if the disk is jammed. The device is equipped with a 4 m power cable. Prevention of excessive heating of the electric motor is provided. The tool weighs 5.6 kg. The electric motor brushes are easily accessible so you can replace them yourself.
In the next video you will find a review of the AEG WS 13-125 XE grinder.
The comment was sent successfully.