Making beds from DSP

Fenced beds in the country are not only an aesthetic pleasure, but also many advantages, including a high yield, a small amount of weeds and convenience in picking vegetables, berries and herbs. If the decision to build the fence has already been made, you should choose the material from which the frame will be mounted. A DSP is suitable for this.

Cement particle board is a modern composite material from which beds are formed. It has many advantages over materials such as wood, slate, concrete. Separately, it is worth mentioning its harmlessness to the soil and, accordingly, to the plants that will be grown on the site.

Let's list the most significant characteristics of a DSP.

• Moisture resistance. With constant exposure to water, the standard dimensions can change by a maximum of 2%.
• Strength. DSP does not burn (fire safety class G1) and does not disintegrate over time. This is achieved by combining cement and wood chips.
• Environmental friendliness. When wet, the strips do not emit harmful substances into the soil.
• Ease of use. For the vertical connection of the panels, a cement screed is used, and the corners are attached to each other using an aluminum profile.
• Low weight. This material is much lighter than concrete or cement without additives.

DSP can be safely used for arranging beds in the country. Fenced beds will help to get rid of the spread of weeds throughout the area, which makes it easier to care for the plants, in particular, it will be easier to weed the garden. When there are well-equipped beds, it is easier to plan the sowing of plants and pick up predecessors for them.

The benefits of using this material are obvious, but is there any harm? There is only one negative side of using cement-bonded particleboards - the price of strips. It is slightly higher than on slate or boards, but it will also last much longer.

The scope of application of the material is wide: it is used in construction, from it they not only build beds, but also create mobile structures, they are lined with houses and used in landscape design.

Another advantage of cement-bonded particle boards over other materials is its wide range. On sale you can find strips for beds of different heights, lengths and thicknesses. The wide variety of slabs on the market allows you to independently assemble beds of any size.

If a person decides to save money on a designer and equips the site on his own, then he will have to buy a DSP separately. Ready-made beds made of cement-bonded particleboards are more expensive than individual elements. Conventionally, all slabs, based on their size, can be divided into several groups:

• thin strips for beds with a thickness of 8 to 16 mm;
• DSP of medium thickness - 20-24 mm;
• thick slabs - from 24 to 40 mm.

The given division is conditional. In any case, before buying materials, you need to create a site plan and take into account the climatic conditions in the place where you plan to arrange a garden or greenhouse. If in the spring the ground does not heat up, and the rains do not erode the soil, then you can slightly reduce the cost of building beds by buying thinner DSP.

On sale you can find non-standard plates that remain from cutting. They cost a little more than standard strips, but they can be used to build a garden bed of any shape. For example, when there is not enough space to supply a standard cement particle board, these leftovers can be used.

Among the standard strips, the most common are the slabs of the following sizes:

• 1500x250x6 mm;
• 1500x300x10 mm;
• 1750x240x10 mm.

In the given dimensions of the slabs, the first number is the length of the material (can be from 1500 to 3200 mm), the second is the width (240-300 mm), and the last is the thickness (from 8 to 40 mm).

Separately, we should talk about the height of the DSP. It is standard for all slabs, so if you need to build high beds so that you do not have to bend over during harvesting, you will have to put one strip on top of another and fasten them with a cement screed.

It is also convenient to use DSP in the greenhouse, because here it is imperative to equip separate beds for growing vegetables in the cold season. This avoids the death of plants during a cold snap.

When the slabs have already been purchased and brought to the dacha, you can start building the beds.

For this, we prepare the necessary tools. If you make a metal frame, then you cannot do without a welding machine. You do not know how to use it, or you want to simplify the construction of beds, then a hammer, a shovel, a rake, a circular saw, a set of tools will come in handy. It'll be enough.

After preliminary preparation, you can start assembling the frame. To do this, take metal corners, which will be used to fasten the plates to each other, as well as a profile for fastening the plates around the perimeter. It is buried in the soil by 15-20 centimeters. If the ground is looser, not loamy, then you will have to dig even deeper. If you wish, you can weld a metal frame.

If you do not make a metal base, then the sides themselves are buried in the ground, so they will hold on firmly and will not fall in strong winds. You can correctly connect the strips with a galvanized corner, which is suitable for outdoor use. Companies that specialize in the sale of DSP slabs for beds, when selling, offer special fasteners in the kit, so you do not need to purchase them separately. It is important not to forget to use them during installation.

When the box is ready, the middle is filled with earth. It is better to put a metal mesh under the bottom, it will prevent a mole from appearing in the garden. The earth is poured inside the structure and the soil is leveled, after which vegetables can be sown. But it is better to purchase another DSP slab - it can be used as a foundation formwork - and fill it with concrete. Thus, you can get a warmed version of the beds, which is perfect for the harsh spring and cool summer.

Having studied the many reviews in specialized publications and on the Internet, we can conclude about the durability of the beds from the DSP. Manufacturers claim that such strips will last about 50 years. It is clear that they will not stand so much in their original form. Gardeners say that it is better to take a slab with a thickness of 16 mm or more, because thinner strips are susceptible to deformation at temperatures above 25 degrees Celsius. You can't just take 4 long slabs and make a base. They will bend, fall, deform. You still need a mount. It is better to cut large slabs into smaller sheets of DSP and build a stronger bed with them.

In case of heavy rains, the material does not really swell, rot or go underground, unlike wood. Some summer residents used DSP as a path in the garden and after 3-5 years of being in the ground did not see any radical changes in the structure of the slabs.

It is problematic to remodel such fences. If a redevelopment of the site is planned in a few years, it is better not to enclose the beds with a cement-bonded particle board. Then you have to dig everything up, disconnect, transfer, and this is long and inconvenient. If a person is not sure whether he wants to leave the garden in one place for 30 years or not, it is better not to use such material.

A summer residents also talk about the need to additionally strengthen the frame with reinforcement. This is necessary so that the garden bed does not become round after the first season. This is often the case with fenced-in areas made of flat slate. This rarely happens with DSP. Basically, this happens when the sheets are not properly bonded.

Some gardeners were faced with the fact that the sheets had to be ordered via the Internet, since this material is still new and not so widespread. Therefore, if you buy only a few pieces, you will have to look well for a supplier, because building materials are often sold in bulk or starting from a certain number of units.

In any case, there are more pluses than minuses from beds with cement-particle board. This is a very good option for decorating not only beds, but also large flower beds and lawns.

How to make a warm bed from DSP on your own, see the next video.