Asbestos cement sheets for beds

The decision to use asbestos-cement sheets for arranging the beds finds many supporters, but there are also opponents of this material, who believe that it can harm plants. Nevertheless, such fences are quite easy to make with your own hands, they are inexpensive, which means they deserve attention. Beds of asbestos cement in the form of strips and slabs for summer cottages look neat, serve for a long time, avoid overgrowing of crops with weeds, and greatly facilitate the care of the garden.

When planning to choose asbestos-cement sheets for the beds, experienced gardeners prefer to weigh all the positive and negative aspects of such a decision from the very beginning. The obvious advantages of this material include a number of factors.

1. Biological resistance. It is not afraid of rot and mold, which other building sheets are susceptible to. This also determines the service life of fences - it is 10 years or more.
2. Effective soil heating. For these properties, sheet slate is especially loved in cold regions, where it is often necessary to postpone planting due to frost. In the asbestos-cement fencing, crops will sprout together, the heat accumulated in the soil will allow you not to fear a possible loss of yield.
3. Strength. The fence successfully withstands the effects of atmospheric factors, is not afraid of frost, rain, sun, strong wind. The rigidity of the material provides it with sufficient reliability and functionality.
4. Protective properties. By deepening the fence a sufficient distance, you can prevent attacks by rodents and moles on root crops, cut off access for slugs and pests. In addition, it is much easier to control weeds in a well-equipped garden.
5. Ease of assembly and disassembly. The design is lightweight, it can be quickly moved to the desired place, restored in case of mechanical damage. Cutting out the material is also not difficult.
6. Affordable cost. You can equip such a fence from the remnants of building materials. But even a ready-made prefabricated kit will cost the owner quite cheap.
7. Accuracy and aesthetics. Fences based on asbestos-cement are easy to paint and look attractive. You can choose from wavy or flat options.

Not without its drawbacks. Asbestos-cement materials are made from a base that can harm the environment. Application of acrylic paint or liquid plastic over sheets helps to avoid risks. The disadvantages include the instability of geometric parameters. Products sometimes warp, they have to be changed.

An obvious disadvantage is the increased risk of overheating of plant roots. In hot climates, the ability of asbestos cement to give off heat often leads to the fact that crops simply die.

When planning to use asbestos cement for fencing beds, you have to take into account some of the rules and recommendations of specialists.

1. Garden beds orientation. In order to obtain optimal illumination of crops, they are placed in the direction from east to west.
2. Height of the fence. The larger it is, the deeper the lower part of the slate sinks into the ground. At high ridges, up to 50% of the area of ​​the fence is dug in.
3. Frost protection. For this purpose, a layer of compost is first laid inside a ridge or flower garden formed with the help of the sides, and then the soil is poured.
4. Sealing. The placement of a layer of sawdust around the perimeter with its subsequent compaction helps to increase the stability of the fence.
5. Choosing the right distance. For the convenience of working with crops between the fenced blocks, leave from 40 to 50 cm of free space. In it you can plant a lawn or pave paths.

It is worth considering that slate beds are not recommended to be made higher than 70 cm above the soil surface, even if there is a greenhouse on top. The interior space can be easily divided with cross sections if it is necessary to separate certain crops from others.

When choosing asbestos fences for a summer residence, you can take both large-format slabs and ready-made panels or a set of strips already cut to the required size. Buying kits is slightly more expensive. Besides, slate of this type is flat and voluminous - wavy.

Flat sheets are less resistant to wind loads. At the same time, such asbestos-cement panels look neater, fit well into the design of a site with a clear and strict layout. Wavy options are not so aesthetic. But such a slate made of asbestos cement is better able to withstand loads and mechanical damage, and is not subject to deformation.

It is quite easy to make asbestos-cement-based fences with your own hands. To complete the work, you will need a sufficient amount of slate - flat or wave, the calculation is made according to the length of the sheet. To form the edging, sections of the profile pipe are used, acting as stiffeners, they can also be used to connect the frame for the fence. And also it is worth stocking up on measuring devices, tools for cutting slate.

The order of work will include several points.

1. Site selection. It should be located in a clear area, away from trees and buildings. A suitable area is watered, the soil is tamped.
2. Markup. With the help of pegs and ropes, the dimensions of the future garden are outlined. The optimal width is up to 1.5 m, the length is up to 10 m.
3. Cut the sheets. Waves are divided in the transverse direction, flat without restrictions are cut in the desired plane. The easiest way to work is with a circular saw, installing a diamond-coated wheel on it. The sheets themselves are marked with chalk.
4. Excavation. Trenches with a width equal to the dimensions of a shovel are dug along the perimeter of the marking. The depth of the ditch should be up to 1/2 of the height of the sheets. The bottom of the trench is rammed and compacted with a 50 mm high crushed stone pad.
5. Installation of fencing. Sheets are installed, covered with earth, rammed. In the process of work, it is worth carefully measuring the position of the fence, avoiding vertical deviations.
6. Installation of stiffeners. They are driven in in increments of 25-50 cm, placing them against the slate walls. You can use a hammer or mallet.
7. Laying compost and soil. After that, the beds will be completely ready for use. All that remains is to sow.

Following this instruction, each summer resident will be able to independently equip asbestos-cement fences for the beds on their site.

For information on how to make a bed of asbestos-cement sheets with your own hands, see the next video.