All About Fubag Generators

There are a large number of brands of power generators. And each of them deserves attention from consumers. Now is the time to learn all about Fubag generators.

From the very beginning, it should be said that the country of origin of Fubag generators is Germany. This moment already says a lot to everyone who knows at least a little about technology. AND the company carefully maintains the overall reputation of German manufacturers. Fubag has been manufacturing generators for almost 50 years. It meets all the needs that arise during construction and renovation work.

As a result, subject to the operational and service standards, the products of this brand serve for several years in a row without complaints. Of course, all materials used are thoroughly tested.

Only carefully trained specialists are involved in the work, and most of the technological processes are automated. Therefore, the service life before the initial overhaul is at least 5000 hours. Thanks to sophisticated silencers, generators can be used even in dense residential areas. In addition, the most insignificant external components of Fubag generators enhance their practical qualities. So, selective shock absorbers-pads allow you to radically reduce vibration and increase the service life.

The key parameter when selecting a specific generator model is its performance. Important: you need to find out the power not by advertising information, but by reading the instructions and technical data sheet. For a house outside the city, for a regular summer residence, a 1 kW device is enough. But the problem is that the level of requirements will gradually rise. And there will only be more electronics, household appliances even in summer cottages.

The optimal amount of the reserve is 30-50% compared to the current consumption. A smaller stock is unlikely to cover all needs, and a larger one only means unnecessary costs. All the same, the situation can change dramatically within a few years.

It is also necessary to find out what the connection parameters are - the voltage and frequency of the generated current. They must fully correspond to the current consumed by all or at least most of the devices. Striving to buy both the cheapest and the most expensive device is equally foolish. First of all, you need to pay attention to your real needs. You also need to think about what kind of fuel will be added to the engine.

It is chosen taking into account:

• prices;
• general availability;
• delivery and storage capabilities;
• ease of handling.

It is imperative to think about the characteristic of the load. Heating equipment gives one load picture, communication systems give another, and most household appliances and power tools give a third load picture. The next important parameter is the difference between synchronous and asynchronous models. Asynchronous technology is simpler and much more efficient for working with welding machines; synchronous is preferable for highly sensitive home appliances.

When choosing a compact inverter generator, you should pay attention first of all to the TI 800. Thanks to its lightness and thoughtful design, as well as a comfortable carrying handle, placing the power plant in the trunk of the car, moving it (unloading, loading) is not difficult. The generated current is sufficient to power all devices on a fishing trip or on foot, cycling. Main technical properties:

• peak voltage 0.8 kVA;
• the level of electrical protection is not lower than IP23;
• rated current strength 3.2 A;
• refueling with AI-92 gasoline;
• current frequency 50 Hz;
• oil sump 0.25 l;
• a gas tank with a volume of 2.1 liters;
• the capacity of the combustion chamber in the engine is 53 cubic meters. cm;
• 4 hours of operation at 75% load.

If you need to choose a Fubag inverter generator, you should pay attention to TI 1000... This is a mobile device with a total power of 1 kVA. With its help, you can guarantee both a comfortable rest and successful work even where there is no stable power supply. The inverter element maintains maximum power quality.

Sometimes a 1 kW device is not enough. Then you need to take TI 2000, the power of which reaches 2 kVA. This model is designed for uninterrupted supply of consumers for 5 hours. A sturdy casing is made in such a way that the power plant is freely placed as close as possible to the place of work. In continuous mode, the power is 1.6 kW.

If you need a three-phase device with auto start, it is perfect BS 17000 DA ES... The automation unit is included in the package, it is optional. With the help of sockets and terminals, you can remove all the power from the generator. All key parameters are displayed on the 5-in-1 display.

The synchronous generator is protected to IP23. Other properties:

• rated current 27.1 A;
• power factor 0.8;
• 2 cylinders;
• 4-stroke execution;
• crankcase capacity 2.5 liters.

The power of 5 kW is developed by the generator set BS 5500... The limiting short-term level of generation is 5.5 kVA. The four-stroke engine has 1 slave cylinder. The tank capacity is 25 liters. Net weight - 88 kg.

Other nuances:

• combustion chamber volume 390 cm3;
• fuel consumption when loading ¾ - 1.9 liters per hour;
• electric starter with reverse;
• sound volume at a distance of 7 m - 80 dB.

Deserves attention and BS 11000 A ES... This power plant is equipped with an automatic system Startmaster BS 6600. The power of the device is 10 kW, which makes it possible to successfully supply current to a construction site or a small industrial facility. The rated current reaches 43.5 A.

It is worth considering a few more models from the same manufacturer. Attention is drawn primarily to the water-cooled diesel generators. This includes, for example, DS 16 AC ES... A single-phase apparatus is placed in a casing that reliably stops noise. Autonomous power supply is 100% guaranteed.

The rated current reaches 54 A. The starting system operates at a voltage of 12 V. The current frequency is 50 Hz, which allows you to confidently use it for household needs. The engine is equipped with 4 cylinders with a diameter of 85 mm. The motor makes 1500 revolutions per minute, and at full load consumes 5 liters of fuel per hour; the consumption is reduced by 75% to 3.7 liters.

The maximum capacity of this power plant reaches 17 kVA. In continuous mode, this figure will be 13.6 kVA. Rated current - 21.6 A. Piston stroke - 95 mm. At 75% load, 3.7 liters of diesel fuel is consumed in 60 minutes.

The Fubag generator starts up very easily and freely. The launch does not cause any problems even in rather difficult conditions. Experts also note that the repair of such systems is extremely rare. Users pay attention to the large tank and the lack of the need for frequent refueling. There are no difficulties even when working with welding machines.

The required load is fully supported. Even the relatively low power Fubag devices provide energy to a garage or a range of household appliances. It is strongly recommended to use Euro-4 or Euro-5 gasoline. The use of Euro-3 fuel is not very reasonable. The cost of Fubag welding generators is fully justified by their qualities; however, sometimes strong vibrations occur.

See the overview for the FUBAG TI 800.