Mowers for tall grass and uneven areas

Mowers for tall grass and uneven areas can be a great help in the work of farmers and summer residents. There are self-propelled gasoline and mechanical hand mowers, other models, the features of which should be known as deeply as possible. It is also useful to take into account the selection advice given by professionals.

It is necessary to take care of the site - this is an axiom. And it is also necessary to procure food for pets. But sometimes as a result of a long absence of people who visit the site only periodically, the grass on the same lawn has time to grow to a great height. Yes, and the procurement of feed often has to be carried out among solid thickets, in not quite even, frankly, places.

Quite high requirements are imposed on this technique. Simple household trimmers will be ineffective, and they are not reliable enough. Suitable mowers can be found among the products of various companies and at very different prices, so it is by no means an absolute figure, as is often thought. But what is necessary is a powerful drive or a powerful mechanical part (in manual models). The ability to move over rough terrain is also important, and with varying speeds over a wide range.

For cutting off heavy grass and small bushes, the line is almost useless. We must give preference to disk designs. The only exception is cases when work with high thickets will occur from time to time and in a small amount. Equipping with serious wheels, allowing you to go around large obstacles, is encouraged. Finally, it is useful to make sure that the cutting end is designed to withstand impacts on various obstacles (although this ability, of course, should not be overused).

Choosing a gas-powered self-propelled mower, you can give preference to the Hyundai L 5100S. This is a multifunctional device equipped with a 6 hp engine. with. and designed for mowing large areas. Despite the significant power, the device consumes relatively little fuel and does not make too much noise. There are 3 programs:

• mulching;

• side discharge;

• accumulation of grass in the collection box.

The knife is made of high quality steel. Thanks to him and the powerful turbine, the mowed mass is drawn into the inside of the housing, if the storage mode is selected. By manipulating the lever, you can set the cutting height from 2.5 to 7.5 cm.

An alternative solution is the Caiman Xplorer 60S. This advanced French lawnmower does not require a grass catcher. The company description indicates that it is suitable for a summer residence, for a farm, and for urban conditions. This version is supported by:

• thoughtful wheelbase;

• the ability to turn on the spot;

• powerful premium motor;

• efficient cutting of thick stems and even thin stems;

• the ability to collect leaves;

• relatively low level of hazardous emissions;

• saving fuel;

• the ability to cope with thick grass up to 2 m without much difficulty.

Other technical points:

• own weight - 54 kg;

• high quality steel body;

• mulching mode is not provided;

• handle adjustment;

• gas tank capacity - 1 liter;

• wheels with a diameter of 20 and 42 cm;

• width of the cut strip - 51 cm.

Lovers of electrical equipment should take a closer look at the DDE LME3110. The mowing width is 31 cm. The height of the grass after the passage can vary: 2, 4, 6 cm. The storage capacity is 26 liters. Motor rotation speed - 3550 rpm.

Other technical parameters:

• weight - 6.4 kg;

• function to prevent accidental start;

• folding the handles;

• the ability to mow close to obstacles;

• motor power - 1100 W;

• plastic case;

• mulching is not provided.

The mechanical manual category of mowers must also be mentioned. You should not underestimate it - even very reputable companies produce such equipment. For the manufacture of cases, as in the case of mechanized models, metal or durable plastic is used. The quality of work directly depends on the number of pre-installed knives. The device is set in motion with weak jolts, adjusting its tilt and height using a special handle.

Mechanical engineering is valued for:

• overall efficiency;

• environmental friendliness of use;

• gentle processing of grass;

• minimum noise level;

• possibility of collecting small plants

Champion MM4026 is a good example. The 5-knife drum of this mower is quite reliable and comfortable. The device captures up to 40 cm of grass in 1 run. The mowing height (from 2.5 to 4 cm) can be adjusted using a special roller that moves steplessly. Thanks to the steel deck, the knives do not dull for a long time and are reliably protected from failure.

The Husqvarna 64 is also doing well. This device is completely ready for use right out of the box. The mowing height is smoothly changed from 1.2 to 5.6 cm using a pair of screws. The sturdy wheels are equipped with a tread that guarantees a smooth ride during the clipping process. The bicycle handle is not height adjustable at all. To fold it, you need to loosen the special nut. Of the minuses of the Husqvarna 64 mower, only a rather high price can be called.

Of decisive importance here are:

• the area of ​​the cultivated area (that is, the required productivity);

• model power;

• the specific height of the grass to be cut;

• the mass of the device (light models are not powerful enough, and many super-powerful ones are not very convenient);

• type of fuel;

• number of wheels (affecting maneuverability);

• reputation of the manufacturer;

• ergonomics of equipment and controls.