Alutech sectional doors: pros and cons

The fence cannot be solid; it is imperative to provide passages and driveways for transport. To organize them, there is an excellent solution - sectional doors. But it is necessary to study their specifics and key features well, otherwise you can make a number of serious mistakes.

Sectional doors are very widespread in European countries, and the reason for this is their objective advantages over alternative solutions. Structurally, similar products are formed by panels connected by hinges moving along special tires. When the passage opens, the blocks alternately stand directly at the ceiling itself, which allows you to free up the maximum of the adjacent territory.

These are properties common to all sectional structures in general, but Alutech did not consider it necessary to stop at this level.

The company's developers have made every effort to make their product truly universal. It is possible to install gates manufactured by the company in a residential building and at an industrial facility, in a car service and a commercial car service, at the exit from an underground garage.

The design is thought out to match the appearance of absolutely any buildings. All models can be controlled manually, many versions are supplemented with infrastructure for issuing commands from a guard post or remote control.

If you want, the electric drive will be supplemented with automatic controls; even if there is no electricity in the network, the system unlock function is always available. Initially, the entrance complex is designed on the basis of 25,000 ups and downs; but even after 10 years have passed, it will be enough to change the springs to restore the previous performance of the device.

Alutech overhead gates are made of high-grade steel sheets, which are processed according to a special technology and give maximum resistance to external influences. For internal filling, polyurethane foam is used, which does not pose a threat to humans and the environment.

Standard products are covered with a special embossing, not only imitating the wood texture, but also reliably masking small scratches that inevitably appear.

Even if the wicket door is cut in, the panels retain their self-centering function, there will be no backlash between them. This is very important during installation, as well as the fact that the developers took care of equipping the structures with ready-made holes for parts.

The sectional door is completely covered with a rubber seal, the opening is sealed in any situation. Even a very strong wind or powerful blow is not able to disable the entrance complex. All components, including the handle, can be made of materials with a low level of corrosion and can work as long as possible at high humidity.

Sandwich panels and hinges are formed in such a way as to eliminate the risk of injury even in the most unlikely circumstances. A special device is used to prevent breakage of the springs. The sizes are always determined individually, but the step from the standard values ​​is exactly 0.5 cm.Standardized sizes (always available) - 13. The drive can be installed in a wide variety of modifications, providing wide compatibility.

Alutech produces two groups of doors: "Classic" (for respectable buyers) and "Trend" (for those who want to save money and, moreover, get normal quality). The first selection uses panels with a thickness of 4.5 cm, and the components are made of stainless steel. Such products can be safely installed even in polar regions, they are guaranteed to endure the impact of hurricane winds.

Western European concerns can offer a similar quality, but their fees for automatic entrance complexes of this level are significantly higher.

The "Trend" line is made on the basis of 4 cm panels, this is the optimal solution for a garage located in a temperate continental climate. All main parts are made of zinc coated steel. The products will not tolerate wind of 40 m / s, but they are not afraid of very strong gusts. Such properties are achieved not by making the structure heavier, but by its reliable sealing with polyurethane foam. The quality is higher than that of similar gates made in the Russian Federation, and the situation with automation is better.

The supplied lock is a cut-in bolt in the “bolt” format. Closing and opening is possible only with the original key; in all versions, the gate can be locked, unlocked both internally and externally. The locking device is inserted as securely as possible. The designers of Alutech refused from the one-piece canvas, they preferred to divide it into stand-alone panels. This solution made it possible to dramatically increase the strength compared to the monolithic versions.

Alutech engineers have prudently added a counterweight to the design, thanks to which opening is quick and easy. The vertical, rigidly directed plowing course provides free access and close-up access. Assembly with the participation of professionals takes place as quickly and reliably as possible.

When ordering, you can always limit yourself to measuring the height and width of the openings - this data is enough to determine the almost final price and send a specialist to clarify the dimensions. If at this stage there are any misunderstandings, difficulties, immediately refuse to cooperate with a dubious company - this is very risky.

If you are going to save money, you should buy Alutechx doors painted in one of 13 standard tones; the surcharge allows you to get over two hundred more color options. Additional opportunities for both saving and expanding functionality are provided by the choice of an electric drive of various costs; the company cooperates with many leading manufacturers of such components.

Pay attention to the threshold of the wicket. If it is flattened and easier to walk and move heavy loads, it is ideal for shopping malls and organizations. But the increased thresholds (10 and 14.5 cm) will strengthen the strength of the gate and stop the ingress of moisture into the garages. If you want to ensure maximum luminous flux, order a section not made of sandwich panels, but based on an aluminum profile.

The typical installation scheme is the same in buildings with almost any ceiling height; there are also options suitable for low lintels and for the highest possible openings. Keep in mind that the doors of the "Trend" type, not to mention the budget group "Classic", are very susceptible to impacts directly on the canvas. It is not always possible to mount even ready-made kits, correctly arrange the rollers and springs on your own.

You need to balance the canvas using a torsion shaft. It is necessary to take into account that the doors of the "Trend" group do not allow for high installation, for them only a typical and underestimated installation is provided.Regardless of the series, adjustment during installation requires leaving 0.3 m above the opening and 0.45 m on the sides of it (keep this in mind when preparing for work or calling installers). Balance springs must be locked so that the tension in the cables is normal - without loosening or undue tension.

When used, there should not be the slightest obstacles (obstacles) on the way of the gate, even much softer than the canvas itself. When opening or locking, the lock is first closed (opened), and only then the panels themselves begin to move.

Alutech doors are rated by consumers as solid and modern products. Clear instructions for installation, as users assure, make it easy to install these structures even for inexperienced people, and even in buildings with a sloping roof.

Garage doors from Alutech are no worse than those installed on other objects; moreover, some people note that they are becoming more technologically advanced. The fittings are not satisfactory, they work reliably (subject to the rules of use). In addition, repairs and maintenance have become much better and more efficient in recent years. The quality of metal and other construction materials meets even the most stringent requirements. The calculation of springs and other components is considered to be very accurate.

Programming electronic components, judging by the feedback from consumers, is much easier than in products from other manufacturers. The quality standard (GOST) is observed in relation to all components of the product, you will not find complaints about the outgoing seal and loss of strength. The gaps separating any panel from adjacent parts remain the same size for years.

The false panel, designed to increase the mounting height, for all customers fits exactly in the place designated for it by the designers. And the built-in version of the wicket is outwardly beautiful, reliable (it has been in service for many years), and is made no worse than at other leading enterprises.

Thus, sectional doors of Alutech corporation can be safely recommended for any garages, houses and industrial facilities: they will definitely fulfill their task and meet all your expectations.

The number of design options for Alutech gates is very large.

Here is just one of them - the stylish wood-colored drop-down structure in the middle of the brick walls looks very original.

This photo allows you to make sure that the dark solution against the background of light sand-lime brick also looks attractive.

And here they clearly carried out a bold color experiment: the blue gate, surrounded by a light yellow tone, is in perfect harmony with the blue roof.

And most importantly, all copies are flawlessly reliable.

See the pros and cons of Alutech sectional doors in the following video.