Zetta doors: advantages and disadvantages

Doors are a necessary element of any room. Every day we use one or another of their types. Any room has at least one door, so the question of quality, characteristics and benefits is relevant at all times. Zetta doors for various purposes combine excellent quality, beautiful design and excellent burglary resistance.

The Zetta company was founded in 2009, starting with a small production. Gradually, the volume of work increased and a course was taken to expand the sales market. To meet the needs of any client, high-quality equipment was purchased, and the level of qualifications of the company's specialists was improved to the required level.

Over the past years, the company has introduced many innovations in the production of each type of door. The company produces entrance blocks and interior linens.

The production of security door blocks is made of reinforced steel. This type of metal has increased strength at the same thickness, which allows you to make lighter structures with good performance.

Zetta doors are equipped with additional pockets in the places where the locks are installed, which significantly complicates unwanted access to the locks and provides additional protection for the locking mechanisms from dust. This innovation was appreciated by buyers who purchased entrance structures for entering private houses and cottages.

The anti-release pins located on the hinge side make it impossible to remove the doors from the hinges. When closing the lock, the canvas is fixed on both sides.

Stiffeners are located under the main sheet of metal. They are horizontal and vertical, respectively, located relative to the long or short sides of the door. Such inserts impart strength to the canvas both for breaking and for maintaining the geometry of the structure.

Zetta metal doors are equipped with quality fittings from leading manufacturers, equipped with two types of seals: rubber and magnetic. The presence of several sealing circuits helps to avoid the penetration of foreign odors, smoke, dust and drafts into the apartment. The canvases themselves are insulated with the Knauf mineral slab, which is not only an excellent sound and heat insulator, but also increases the door's resistance to heat.

Zetta Voronezh doors are sorted by type of structure. The main product lines are represented by the following models:

• "Standard". The thickness of the metal in this type of door is 1.2 mm, excluding the top coating. Two stiffening ribs are installed in the canvas, the thickness is 66 mm. This design has three sealing circuits, sound insulation is rated at 33 dB.

• "Comfort". In this version, the metal is used 1.5 mm, it also has two stiffening sheets, three sealing profiles and a mineral filling. The inner side is finished with MDF board with decorative foil. The thickness of this model of entrance structures, taking into account the inner finishing, is 86 mm.

• "Euro". Here, the thickness of the outer sheet reaches 2.0 mm, the number of stiffeners is 3 pcs., And the number of seals is also 3 pcs. A special feature of this series is the external MDF overlay. The thickness of the leaf, taking into account the finish, is 79 mm. The filling here is slightly more dense than in previous versions.This design has a noise resistance of 38 dB.

• "Premier". A special feature of this series is the door depth, taking into account the finish it is 105 mm. The finish consists of two MDF panels on the outside and inside. There is an increased number of anti-removable pins, 6 of them are installed, there are three sealing circuits. The noise insulation index is 41 dB. The thickness of the metal of the outer sheet is 2.0 mm.

• A separate column can be used to represent input doors with a mirrorlocated on the inside of the canvas. This is very convenient, this finish fits perfectly into any interior, it is especially welcome in apartments with a small hallway, where there is no possibility to hang a separate reflective glass, moreover, this option makes the room brighter and wider.

Of course, each product has its own pros and cons.

Advantages of Zetta metal doors:

• Special steel with increased strength. In the manufacture of this metal, special additives are used that increase the physical performance by several points.
• Preservation of blade geometry under the most severe operating conditions. The manufacturing technology is designed in such a way that when creating the door, there are as few places as possible that are prone to curvature and deformation. With proper installation, the structure retains its parameters throughout its entire service life.
• Burglary protection system. A pocket for locks, which complicates access for intruders to the locking mechanisms, anti-removable pins that fix the canvas in a box in a closed form, high-quality fittings with a high class of secrecy, metal thickness are the main indicators of the security of the door and, accordingly, your property.
• High quality coverage. The external and internal coating of the proposed structures provides for a long service life and protection from certain environmental conditions.

Possible disadvantages:

• Loose webbing. This problem occurs due to improper installation of the door unit. Installation should be done by experienced craftsmen. If the technical conditions are not observed during the installation of the structure in the opening, then the shape of the box, canvas, or both, may change over time.
• Failure of locks and other accessories. The reason for such a malfunction is very rarely a manufacturing defect, most often it is a physical effect on moving parts. Handles, lever and cylinder locks are not designed for the application of great physical force.

• Drafts appear. This trouble can happen due to abrasion of the sealing elements. It is quite simple to solve it, replacing rubber bands does not require special skills and takes very little time. To increase the service life of the seals, it is recommended to wipe them 3-4 times a year with a special silicone grease.
• Spoiled appearance. The coating of any doors is not intended for cleaning with abrasive materials; this gradually leads to abrasion of the most resistant surfaces. Direct sunlight can also adversely affect your appearance. Do not allow moisture to freeze on the surface of the door, especially with a rough coating, this can damage the integrity of the outer coating and lead to destruction.

Of course, all types on the market differ in price. Zetta strives to keep costs down to keep the door's final price tag as low as possible while maintaining high quality. The cost of any product depends on many qualities. Main criteria:

• Metal thickness. The more material is spent on the manufacture of the structure, the more the cost of the structure increases. This indicator is especially important for those who are worried about the quality of the door burglary resistance.It should be borne in mind that this affects the weight of the product, and not all walls can withstand such loads.
• Fittings. During production, components from trusted manufacturers are used, which also differ in security classes. The cost of the lock alone can reach 40,000 rubles, respectively, this will be taken into account when forming the final price of the product.

• Finishing. Depending on the wishes of the client and taking into account fashion trends, Zetta offers a great variety of options. Standard trim panels are rarely made from expensive materials. But manufacturers can also offer customized solutions. Accordingly, this also affects the cost. Additional metal structures, sheets, forging, moldings can also be used as decorative elements. In some cases, this increases the strength of the web.

When choosing a protective structure for your home, decide on all your desires and what criteria to leave as a priority.

In the modern world, sometimes there is a lack of comfort. Some people need privacy to spend time alone with themselves, or apart from the company. Interior doors help to provide insulation inside the house.

Modern trends dictate their own conditions for their choice. The Zetta factory is trying to keep pace with the times and is constantly expanding the range of products it offers.

Zetta exterior door coatings are very diverse.

• Veneer. A thin cut of natural wood glued to the base. It is made from wood of those species that are easy to process, but retain their properties well during the production process. A variety of shades, a wide choice of material processing, naturalness make such doors one of the most popular products.
• PVC. Artificial PVC covering. It is highly resistant to mechanical damage. Most often, the coating is smooth and, upon closer examination, loses to natural material in appearance.
• One of the modern materials that allows you to simulate as accurately as possible natural veneer... Consists of 90% polypropylene and 10% wood. Environmentally friendly material, has an elastic structure. It is quite difficult to damage it, it is not afraid of chemistry and exposure to direct sunlight.
• Lamination. Coating based on a printed pattern followed by a protective layer. Depending on the presence and thickness of the protection, the physical properties also change. Usually the cheapest production. Such coatings are often susceptible to UV radiation if they are not specially protected.

Consumers who have chosen Zetta products for themselves invariably leave the most positive reviews about the purchased product. Whatever criteria are imposed on the design, all of them can be satisfied in the company's product range.

For those clients who make an individual interior, a wide range of options for the execution of customized products is offered. It may take more time to manufacture, but it will be your door that meets all the requirements.

Stopping their choice on this product, buyers are confident in the quality of the products they receive. The Zetta company gives a guarantee for all manufactured entrance structures and interior door panels, which is also noted by everyone who has bought the product.

For information on how to choose the right Zetta front door, see the next video.