Features of replacing door locks

Content
  1. Device selection
  2. Required tools
  3. Replacement of different types of locks
  4. Useful Tips

Door locks, regardless of the model and how they are used, are capable of failing. The reason for this can be anything: from the distortion of the doorway to the intervention of burglars. The solution to this problem is either repairing the locking device or replacing it with a new one. Of course, the second option is more suitable, since it is often necessary to pull the mechanism out of the door leaf for repairs, and here the question of the safety of the room and its provision arises.

The lock can be replaced as soon as possible - you just need to purchase a suitable locking device and perform the installation with the utmost precision.

Device selection

Faced with such a need, a person has an excellent opportunity to choose the required product from the huge number of available options. Foreign and domestic manufacturers are steadily improving their products, while the range becomes wider, innovative products are being developed. There are a number of the most popular types of door locks available.

Below are a few devices to look out for if such a need arises.

  • Cylinder locks... The widespread availability of these products is due to their affordable price and satisfactory performance. Such devices can have varying degrees of complexity - it all depends on the number of cylinders in the structure of the mechanism, because the more there are, the higher its reliability.
  • Suvaldny... Products of this type are distinguished by a higher degree of reliability. They are able to withstand attempts by a vandal (force) method of breaking, because they do not have protrusions. The mechanism is hidden in the door panel, as a result of which the criminal cannot access the core.
  • Combined... Experts recommend, if there is such a need, to pay attention to this type of product. In their structure, two different mechanisms are combined and will be cheaper in cost than two separate locking mechanisms. Installation of such locks is carried out only by the mortise method.
  • Electronic lock... Thanks to modern technologies, a completely new type of locking device was developed and created, which very quickly became in demand. This is an electronic mechanism that is opened not with a regular key, but with a magnetic card. There are also alternative ways to unlock such devices: by entering a code from the built-in keyboard and using the control panel.

And, finally, the most progressive modifications of electronic locking devices, which are opened by reading the papillary lines from the finger (fingerprints) or the retina of the owner of the home.

Required tools

To replace a door lock, you will need the following tools:

  • screwdrivers - flat and Phillips;
  • knives - ordinary and clerical;
  • hammer;
  • chisel;
  • electric drill and wood drills (for a wooden door);
  • an electric drill with metal drills of various diameters (from 12 to 18 mm) is the main tool for inserting or replacing a lock in a steel door;
  • pliers, chisel, ruler;
  • screwdriver with screws.

Replacement of different types of locks

Locks are recognized not only by the mounting technique, but also by the structure.Before replacing a door lock, you need to choose one that will suit the owner of the home.

Cylinder Lock (English)

The cylinder locking mechanism is most likely the simplest in structure.

It is applicable for virtually any type of door, and therefore, most likely, there will be no questions with its replacement.

English castles have a big advantage when it comes to self-repair. There is no need to replace the entire mechanism - you can buy a new cylinder with a lock and mount it in place of the old larva.

Among other things, they are manufactured according to approximately the same standard, and, therefore, a spare part of almost any manufacturer can be selected for the locking mechanism.

The step-by-step process of replacing an English lock on a metal door leaf is as follows:

  • it is necessary to remove the protective protector (armor plate) from the outside of the web;
  • then you need to open the lock with a key;
  • unscrew the plate from the end of the door leaf;
  • to release the crossbars, close the lock with a key;
  • in the center of the lock, you need to unscrew the screw and get the lock by turning it slightly;
  • then you should insert a new core and perform the above actions, but only in the opposite sequence.

Lever locking device

Such systems are considered extremely reliable, but their replacement will not be easy - it all depends on the manufacturer of the lock. For example, domestic manufacturers produce inexpensive products, but if there is a need to replace the locking mechanism, you will have to replace the lock completely.

Foreign manufacturers, on the other hand, provide their consumers with an alternative: the ability to recode the levers for another larva. To do this, you just need to buy a new element in a set with keys and install it in place of the failed one. Only now it is better to buy a spare part from the same manufacturer, whose lock is installed.

To change the lever lock in a metal door leaf, you need to follow the steps described below.

  • First of all, you should open the door with a key and remove the locking bolt.
  • Then you need to remove the key from the lock and remove the cover plate on the body of the locking device. Similar actions should be carried out with a protective protector.
  • To make it easier to work, it is better to remove the handle and the bolt.
  • After that, you need to unscrew the screws from the end of the door leaf and get the lock.
  • The next step is to carefully disassemble the lock and install a new core.
  • After that, it remains only to install a new or old lock with a new core in its original place and tighten everything in the reverse order.

Rotation of the lock with sliding crossbars

It is much more difficult to change the locking mechanism with sliding bolts on the door leaf. Such systems are quite often practiced for the latest modifications of iron doors - they provide a high degree of security and make it difficult for burglars to enter an apartment in a variety of ways. Due to the non-standard design of the door, crossbars are extended not only on the sides, but from below and above, which block the door in the opening.

To disassemble and replace such a mechanism, you will need to dismantle the door leaf from the hinges and completely disassemble it. From the very beginning, the procedure resembles the replacement of the lever locking mechanism, but in addition it is necessary to retract the lower and upper bolts. For this, a wrench is used, through which you will need to relax the rods and unhook them from the lock.

Do not apply excessive efforts, otherwise you can not only bend the crossbars, but also damage the internal structure of the door leaf.

After replacing all the required elements, the rods are mounted in their original place, and the lock is fixed in the door. It is quite difficult to do all this with your own hands, especially without experience.As a result, it is advisable to seek help from specialists. In general terms, the technique for replacing simple locking devices of any kind is similar to the techniques for replacing cylinder and lever samples.

Replacing the disc locking system

In disk-type locking systems, the secrecy mechanism is made in the form of a cylinder. Inside, instead of pins, there is a set of discs (washers). The configuration and dimensions of the slots on them must correspond to the dimensions and configuration of the slots on the key blade. A distinctive feature of such a mechanism is the semicircular section of the key.

There are two types of such locking systems: semi-automatic (also known as "push-button") and automatic, which are produced both in our country and abroad.

As a result, if you ever have to change the disc lock, you need to remember some rules.

  • If a domestic disk-type locking device fails, it is better to immediately change it completely. At the same time, it is advisable to buy a foreign-made device, since Russian manufacturers cannot boast of impeccable quality and good durability.
  • If a foreign disk lock is now available, then only the core will need to be changed (if the question is in it). A highly qualified specialist will help to determine the causes of failure.

It is worth remembering that the degree of secrecy is based on the number of disks (the more, the more reliable), as well as the number of likely positions of the slots on their surfaces on the sides. With all this, the secrecy of the device loses its value if the mechanism does not have sufficient strength - for this reason, it is necessary to make sure that the locking device is protected from mechanical stress.

For example, knockout is best counteracted by a larva that does not completely pass through the body. An additional protection against drilling, cutting, blows will be a mortise armored pad (armored cup).

If there is an opportunity to update, strengthen the locking mechanism, then it is better to take advantage of this case.

Replacing the cross key lock

According to experts, the largest number of calls is associated with the failure of this type of locking mechanism.

Extremely common in the following situations:

  • malefactors broke into the locking device (as a rule, 1 minute is enough for this);
  • loss of keys (in this situation, it is necessary to change the larva or the lock completely due to the fact that the mechanism cannot be recoded);
  • breakage of a larva made of silumin (this is a silicon-aluminum alloy that has insufficient strength, although it resists rust excellently).

Restoring the locking device with a cross key consists in rotating the cylinder or the entire lock. But not all devices are supplied to the Russian market with replaceable locks. It happens that spare parts are defective and cannot be installed... For the most part, you can upgrade the castle, increasing its reliability. Leave the body of the locking device, and change the mechanism to a lever or English (cylinder).

The only advantage of the cross-type lock is its low price and good protection from moisture (thanks to silumin). Mounting locks of this type in the door leaf will take a little time.

Do-it-yourself plastic door lock replacement

In a situation where the breakdown is significant and it is no longer possible to repair the problem that has arisen, an absolute replacement of the locking device is required.

It must be implemented as described below, while observing the order of actions.

  • Open the door and unscrew all screws.
  • If there is a bezel plug, place it in a horizontal position and then remove all screws holding the handle.
  • Dismantle both the previous locking device and the handle itself.
  • Measure all parameters - this refers to the length of the previous drive.
  • Test to see if the holes for the handle pin (square piece) match.
  • Insert the prepared locking mechanism into the groove. If necessary, it can be driven into place with a weak tapping using a rubber-tipped hammer. Before fixing the mechanism, it is necessary to check whether it fits into the prepared groove.
  • Replace the handle and secure with the screws.

Replacing the lock in a door made of wood

In the case of a wooden door, as with any door made of wood, for example, an interior door, the process of rotating the lock is not complicated. Another thing is actual - establishing the type of mechanism that needs to be changed, as well as adjusting the shape of a new product to the existing parameters.

The operating principle is outlined below.

  • A faulty or outdated lock is dismantled and, based on its configuration, a new device is purchased. The advantage of this step is that there is no need to make corrections to the overall structure of the door leaf and the entire door system.
  • Then it is necessary to remove the fasteners of the locking device (as a rule, this is the end of the canvas).
  • Pads, handles, fittings are dismantled.
  • The lock is taken out.
  • A new mechanism is being mounted.
  • Marking is made for drilling holes for fasteners.
  • A groove is drilled, a place for a keyhole is indicated and drilled out.
  • The locking mechanism is inserted, the places for the fasteners are indicated, and the fixing is carried out.
  • Work is underway to bring the canvas to its original form.

Glass sheet locking systems

Glass canvases can be used for different purposes. Quite often it is required to be able to lock them. Locking systems for glass sheets differ in their design from mechanisms used for metal, wood or plastic doors. They have not only a different design, but are also mounted in a non-standard way, since the door leaf is made from a breakable material.

Installation technology and a variety of designs. Often, consumers ask themselves whether it is possible to install locking devices on a glass door without drilling. Such an operation can be done - for these purposes, a specialized lock is used, which is suitable for canvases of any thickness. The main distinguishing feature of such a mechanism is the presence of a special strip, by means of which it is fixed to the door leaf. The plate has a curved configuration - it fits the canvas and is pressed by means of bolts.

In order to avoid that the plate pressed against the canvas does not damage the glass, it is supplied with a specialized substrate made of polymer material.

The locking device on the glass door is closed by means of a rack and pinion mechanism, which is called a "crocodile". The bar is equipped with teeth, and the locking device has the configuration of a cylinder, due to which, when it enters between the teeth, the mechanism is tightly locked. A similar design, as a rule, is practiced for connecting two glass sheets mounted in one door opening with a locking mechanism.

To open such a door, you will need to remove the plate. This requires the use of a key. Glass does not need to be prepared before installing this type of locking system. The integrity of the door leaf is not violated, but a fairly reliable closing of the leaves is provided.

Specificity of work on replacing the locking device in the Chinese door

The propensity of apartment owners and private sector owners to thrift, expressed in the acquisition of inexpensive door structures, often turns into a headache during their further operation. Considering the above, it is not surprising that the question of whether it is possible to change the locking system in a Chinese steel door is not surprising.The answer to this question worries a large number of buyers of such products.

There are a number of factors that need to be taken into account in order to figure out and solve a problem.

  • In the overwhelming majority of situations, it is, of course, possible to implement work on the rotation of the locking mechanism with your own hands. But for this you need a lock made in China, similar in all respects.
  • Replacing the locking mechanism in the entrance door leaf from China with a lock made in Turkey or in one of the EU states is permissible, but this will require finding a structure that is appropriate in size, which is not always the case.
  • Often, it is sufficient to rotate the core to restore the operability of the locking mechanism, which applies mainly to cylindrical locking systems. It will cost less for the owner of the home, moreover, the work is carried out quickly and without any difficulties.

As a result, we can draw the following conclusion: in order to successfully replace the locking device in the Chinese door leaf, it is necessary, first of all, to establish the type of mechanism, and then find a device similar in parameters, it does not matter whether it is "native" or made by a third party ...

The work is carried out according to the following scheme:

  • the screws fixing the cover are removed, which are localized on the panels with door handles;
  • the panel is removed, after which the square rod of the handle and the valve axis are removed;
  • unscrew the screws located at the end of the canvas from the bottom and top of the plate of the locking system;
  • by means of a screwdriver inserted between the door leaf and the end panel of the lock, it is necessary to remove the locking mechanism;
  • a new mechanism is mounted - the process is carried out in the opposite sequence.

If the rotation of the locking system in the door leaf made at one of the Chinese factories is carried out, you should not pay attention to the external appearance of the lock and its price - a high degree of reliability should be a determining factor when selecting a new device.

Useful Tips

To ensure the correct, long-term and high-quality operation of the locking system, it is necessary to take note of some useful recommendations.

First of all, when choosing locking devices, it is best to bypass modifications that have an unnaturally low price or are sold at an unreasonably profitable discount, promotions. Apparently, these products are outdated, and, most likely, they have repeatedly failed. Such products are not capable of properly securing housing.

Those sellers who are not prepared to provide the required documentation to enable the sale of such products should be avoided. Apparently, these sellers are selling devices with a weak and low-quality design, which can be opened with an ordinary nail. Such a locking device will not provide the required degree of security.

After installing the mechanism, you must personally make sure that everything is installed securely. It is better to control the operability of the lock at all stages of the installation process. It is worth using the products of those companies that have proven themselves in the world market and have vast experience in this area of ​​production.

In order to come into contact with the problem of replacing the door locking device as rarely as possible, it must be lubricated from time to time.

In this case, it is not necessary to dismantle and disassemble the mechanism - you can do with a syringe, the needle of which enters the keyhole without problems. After the injection of machine oil, it is necessary to turn the key several times on the sides to the limit.

Replacing the lock is not a difficult task and is within the power of every person, but, starting to work, you need to be patient.Not only the further convenience of using the door depends on how well the replacement was made, but also the inviolability of property, safety of living, because in the event of a break-in, an incorrectly installed device can fail.

In the next video, you will find the replacement of the front door lock cylinder in three minutes.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture