We select tools for inserting locks into interior doors
It is most often necessary to install locks on interior doors using the tie-in method. But it is not necessary to invite masters for this. But you will have to use a professional tool (and carefully select it) in any case.
Features of the kit and its functions
A standard set of tools for inserting locks into interior doors includes:
chisel;
feather drill for wood (2.3 cm diameter);
complete lock, handles and screws for it;
a screwdriver for working with these self-tapping screws;
electric drill;
- crown cutter for working with wood (diameter 5 cm).
It is advisable to prepare a marker - it will help mark the necessary lines and contours. You can replace it with a pencil, but such a marking tool is not reliable enough. Pencil strokes are sometimes hard to see, especially if they blend into the background. A chisel is needed in order to form a section for a lock. Important: doors made of durable materials should be processed not with a chisel, but with a milling cutter - much less effort and time is spent.
How to choose a milling attachment
Experts note that it helps to speed up the work process several times. Moreover, the prepared niche turns out to be much smoother and more accurate than when using a hand tool. Reading the reviews, you need to immediately find out whether both of these parameters are provided or not. There are different types of lock inserts, but they do not replace each other - so this point is worth paying special attention to. Vertical, aka submersible, the device just allows you to select slots of arbitrary depth.
For your information: this tool is useful for securing not only locks, but also door hinges. If you want to make the edges of the groove more aesthetically pleasing, an edging (sometimes called edging) device comes to the rescue. Experts prefer to use a combined device. It combines both functions and eliminates the need to move two heavy machines to each site. However, the cost of such equipment will naturally be higher.
At home, it is more correct to use a specialized router. At the same time, he does not need especially high power, on the contrary - it will only unjustifiably increase the severity of the machine. But the option of adjusting the rotational speed of the cutter is very valuable for amateurs. She will help you to more accurately perform all the planned work. Important: in a good machine, such a switch is located in a safe place (even when working there, you can stretch your hand fearlessly) and allows you to adjust the rate of rotation smoothly, and not stepwise.
Another significant factor is how far the cutter can extend beyond the clamp. Usually this indicator is illustrated by numbers in the name of the model, and is expressed in millimeters. But it is still worth familiarizing yourself with the technical documentation in order to exclude errors as much as possible. In addition, you need to look at whether it will be convenient to use the router.
This is determined by:
the mass of equipment;
the length of the network cable;
the location of handles and other controls;
list of functions performed.
Before buying, it is worth starting the machine. If it is of high quality, the movement of the head should be completely free. The presence of the slightest distortions and backlashes is unacceptable. The less noise the better. You should also see:
whether the view of the working surface is wide;
whether additional lighting is provided there;
are there any auxiliary nozzles, holders and so on.
Additional tools and recommendations for them
To install a lock in an interior door, be sure to use a tape measure. It helps to accurately measure the required distances. In addition, useful devices will be:
stationery knife;
masking tape;
drill with a diameter of 0.2 cm.
You need to buy sets of drills in stores that sell hardware for doors. But you can look for them in furniture stores, construction markets, and hypermarkets for home goods and repairs. The choice depends on personal preference. Important: the drill must be thicker than the lock. If some tools are not enough, but they are needed urgently, it is worth contacting the services that rent out the inventory.
In some cases, a perforator can be of great benefit. It is needed to align and enlarge the opening. Holes are drilled with a perforator, where the anchor dowels will be placed. When purchasing or renting a screwdriver, it is worth finding out if the necessary attachments are included in the kit. If you have to process hard-to-reach areas, dissolve platbands or extensions, sometimes you need to prepare an electric jigsaw.
When choosing pencils and markers for marking the canvas, one must refuse to buy products with very rigid rods. They will leave traces, which will be extremely difficult to get rid of. To measure all the dimensions more accurately, you need to use a tape measure with a tape 3 or even 5 m long. To determine how deep you need to embed the lock, a caliper will help. To more accurately orient the locks, eliminating distortions, it is required to use a bubble building level.
But since the locks are usually installed on a small part of the door, you will have to use a steel ruler. It is much stronger than wood and plastic, and can withstand even the accidental impact of the tool. Angles are measured using metal test squares. This device is also needed to tune an electric tool. It is imperative to prepare a set of screwdrivers, especially since it will also come in handy when installing the hinges.
Sawing tools deserve special attention. The miter saw is used when it is necessary to accurately saw through the platbands and bars. Ordinary hacksaws and even quality jigsaws can split the edges of parts. Those will become uneven, and this will not allow the lock to be fully installed. Circular saws are used to cut the additional bar.
You also need to prepare: a mounting gun for feeding foam, chisels and peaks for a perforator, files for a jigsaw.
How to insert the lock into the interior door yourself, see the video.
I understood what it was written for. This was written so that no one would put a door for himself, but would call the master. For those who still want to install the doors on their own, I will say this - most of the tools for installing an ordinary inexpensive door are not used. But you must have even hands)
Sergei, you should always have even hands if you are going to do something successful with them. The tools shown in the video greatly simplify the installation work and make it comfortable for the wizard. According to your logic, you don't need to buy a mop to clean the floor, you can do it with an old toothbrush, but it takes a lot of time)
But there is no point in buying expensive equipment for installing 2 doors. With a small volume - drill, drill, hacksaw, chisel. With a large volume, constant scrapes - milling cutters, miter saws, etc. etc.
The comment was sent successfully.