Features of the repair of door handles of metal doors

With daily use of the door leaf, the handle, as well as the mechanism that is directly connected to it, takes on the greatest load. That is why these components often fail and need proper repair. As a rule, you can correct errors in the operation of these elements yourself. The main thing is to adhere to simple instructions and act carefully. Today we will take a closer look at how to properly repair door handles.

Before dwelling on the repair of handles, you should familiarize yourself with their common varieties, which have different structures and design features. The most popular are the following options.

• Round swivel. It is difficult to imagine a high-quality mortise lock without these components. Such a device is operated by turning the handle clockwise or counterclockwise.

• Push-ons. These handles differ from the above-described variant in that they are made in the form of a very easy-to-use lever, which, when pressed, opens the lock, and when it is returned to its previous position, closes. According to experts and users, the lever handles are the most comfortable to use. Moreover, they can be safely installed on both interior and entrance door bases.

• Stationary. No less common are simple stationary handles, which in most cases are made in the form of a bracket or a ball. Such elements are not connected with a padlock. They serve only as a decorative function and act as a handle when opening and closing the door leaf. To repair stationary products, you only need to tighten loose bolts or install new structures.

Door handles are subject to many different breakdowns and malfunctions. As mentioned earlier, these parts take the greatest load in the door structure, so it is almost impossible to avoid problems when using them. Specific problems directly depend on the type of door handle. The most frequent are the following violations in the operation of the specified accessories:

• door handles very often jam, and when turning, they can "resist";
• there are times when the handle fell off altogether, but its fasteners remained in their original positions (as a rule, such problems arise if the device is made of low quality materials);
• such important parts as tetrahedral pins located in the inner part of the locking device often break, which negatively affects the latch mechanism;
• the latch can stop working over time;
• when turning the broken handle, the tongue may not move;
• in the event of a breakdown, the handle does not return to its original position (this breakdown is difficult not to notice, it usually occurs due to damage or displacement towards the spiral spring).

As you can see, many common door handle problems are easy to spot.For example, if the handle is jammed or its fasteners are loose, you will definitely notice this when using it. It is important to keep in mind that many of the problems associated with door handles are associated with:

• long service life of fittings, subject to regular use (which is why low-quality products fail first);
• the purchase of a product that is too cheap (you should not save on the purchase of these products - such options are unlikely to last a long time, but there will be a lot of problems with them);
• improper installation of the necessary structures (if the door leaves and accessories for them were installed incorrectly, then over time they will create many problems, it will not be very convenient to use them);
• opening the door without a key (if the doors were tried to open with foreign objects, but not a key, then the handles with locking mechanisms may be seriously damaged and require a thorough repair).

The door handles of metal doors can be repaired by yourself. The main thing here is to follow the instructions and use high quality materials / tools. Only if these conditions are met, the result will not disappoint the home master.

Before embarking on such repair work, it is necessary to purchase certain tools and fixtures, such as:

• screwdrivers or a screwdriver (with the help of these tools it will be possible to unscrew all fasteners);
• hex flip keys;
• electric drill;
• hammer;
• marker for preparing the necessary marks;
• sandpaper / brush for metal work.

If you have stocked up with all of the listed tools, then you can proceed to the direct repair of the door handle of the iron door. The procedure for carrying out such work directly depends on the type of specific breakdown that overtook the door leaf fittings. Let's get acquainted with the solution to the most common problems faced by modern users living in city apartments and private houses.

The metal components of the door handle wear out quickly with constant use. Dust particles often accumulate on these elements. In order to avoid such common problems, it is necessary to constantly monitor the presence of lubricant from the locking structure. You need to drop a little oil on the crossbar component, and then twist the handle so that the lubricant is distributed over all the necessary spare parts.

If the handle has fallen off, then, most likely, the circlip is to blame. It can be deformed or displaced from its original place. Often this part bursts. In this situation, repairs will require free time, but it will not be so difficult to do this.

1. First you need to remove the decorative rosette. To do this, turn it several times (some copies are attached with small screws at the bottom - to remove these products, you first need to unscrew the specified fastener element).
2. Next, you will need to unscrew the bolts and screws to which the mechanism is attached.
3. Take out the existing structure and pay attention to the retaining ring. If the specified part is bent or broken, then it must be replaced with a new ring. There is no point in repairing a damaged unit.
4. Next, fix the retaining ring and mechanism in the appropriate area.
5. Position and secure the handle.

Basically, the inner square breaks if the owners bought a cheap handle made from poor and fragile raw materials, for example, silumin. In such circumstances, the entire existing mechanism will have to be replaced. In order not to face such troubles, experts recommend buying steel structures made by well-known companies, rather than silumin ones. Of course, such products will cost more, but they will also last much longer.

If the inner pin breaks, proceed as follows.

1. First you have to unscrew the fasteners at the base of the damaged handle. After you need to remove it yourself.
2. Next, you need to unscrew the decorative strip, bolts, and then remove the entire structure.
3. The new handle with the locking system will need to be fixed in the reverse order.

If the latch does not work during the opening of the door leaf, this may indicate that there is an too small square of modest length in the hardware device. It moves slowly in the direction of the latch and then slides it in. As a result, she will not be able to function properly. In these circumstances, proceed as follows:

1. in the appropriate store you will need to buy an elongated square for the locking system;
2. if the length of this part turns out to be too large, then it can be made a little shorter by using the grinder;
3. unscrew one of the handles, take out the structure;
4. then it will be easy to change the square, and then put the handle in its place.

If the door handle does not bounce back to its original horizontal position, this does not mean that it has undergone serious damage. Most likely, the return spring in it simply flew off. This part can often burst. This is exactly what becomes a problem - it can be quite difficult to find such a product in ordinary stores. Often, under these circumstances, it is necessary to completely change the entire mechanism.

Very often it is necessary to replace the outer handle of a metal door. Users who have bought low-quality fittings (from China) from raw materials such as silumin are faced with a similar nuisance in many situations. Such products are prone to breakdowns; they have to be replaced with unpleasant regularity. In the described situation, you must act as follows:

1. initially you will need to remove all fastening components of the handle;
2. the next step is to remove the square from the handle system;
3. if the last part is of a suitable length, then it is completely permissible not to remove it;
4. then it is necessary to fix the pads and gaskets, and also fix the handle on the square;
5. then the bar is fixed in the required place, the crossbar must also be in its position;
6. at the end of all stages, fasteners are screwed on.

If you need to replace any small parts in the door handle mechanism, then you should be as careful and attentive as possible. Carrying out such work can be traumatic. And losing small elements will not be difficult, so you need to act carefully.

When choosing the right doorknob, don't forget about its design. This element should match the environment in both color and style. Fortunately, stores today have a wide variety of different options for metal doors. Your task is to choose the best one.

When choosing a new handle, you must also remember that such products are right-handed and left-handed. If you buy an option that is not the most convenient for you, then you will not be able to correct your mistake. You will have to change the product or buy another.

Often, door handles are replaced due to the fact that noticeable and ugly scuffs appear on their surface. They negatively affect the appearance of the fittings. Of course, it all depends on the wishes of the homeowners. However, if we are talking about a public institution, a large office or a company, then it is better to install new handles here so as not to spoil the impression of the company.

How to repair the handle on the front door, see the video.