Interior door hinges: tips for selection and installation

Interior doors are such an element of the interior, to which you can always independently choose the fittings at your discretion. Often, with doors made of aluminum, plastic or steel, handles and locks are already selected in the kit. Let's see what types of hinges are on the market, their pros and cons, and features of choice.

The door hinge has a single, but important purpose - it holds the door in the opening. It depends on her how long the interior door will serve you.

If we consider this type of fittings from the point of view of design features and installation method, then they can be divided into the following types:

• card (straight or angular);
• screw-in;
• hidden;
• end (heel);
• "Italian".

Let's dwell on these categories, paying attention to their design features.

The most widespread are card loops, and among them is the straight type. They are also sometimes called loops with a lock. Such devices are attached to the doorway and directly to the door using rectangular cards - they are also called wings.

Card hinges with a right angle are divided into two subcategories: they are either mortise or overhead.

To install the mortise hinges, you will need an additional tool - a chisel or a professional router. During installation, the wings of the hardware cut into the box and the door itself, flush with their interacting surfaces. This is done to cover the door leaf as tightly as possible. Planting depth is usually no more than 3 millimeters.

Overhead hinges do not require additional professional tools. Anyone can install these without special skills. The hinges are made in such a way that when the doors are closed, the two wings fold on top of each other - you do not need to mount them in the door array - you just need to fix them with self-tapping screws at the set level.

Card straight loops can be either right-handed or left-handed, as well as universal. Such a variety of them allows you to later remove the doors without difficulty if necessary. It is not difficult to decide on the choice of direction - determine on which hand the hinge structure will be located from you when entering the room.

Hinges of the universal type can be installed on either side, but at the same time it is more difficult to remove the door from them later than from specifically directed ones. But universal designs also have their own advantage - as a rule, a bearing is placed between two cylinders, which is more reliable and durable than a washer. In addition, the bearing hinges open almost silently.

As for the devices of the card type in the corner version, they are suitable when your door has a rebate. For door leaves of this type, a small part of the wood is usually selected from the end side, which ensures that the door closes tightly during operation.

The difference between the angular type and the straight one is only in the shape - their "wings" are set at an angle of 90 degrees in relation to each other.

Corner card loops can be made from different materials. Steel door hinges are the most economical option, but also the least reliable. The top decorative coating wears off quickly and peels off, which makes the door look untidy. And also steel is afraid of high humidity.

Brass hinges are of high quality.The decorative layer, as a rule, lasts for a long time, and the brass itself is not subject to corrosion and other negative environmental factors.

But the most durable are stainless steel hinges. They are not afraid of either humidity or temperature fluctuations. Their minus is the only, native, steel color.

Now let's look at screw-in or screw-in hinges. They are also suitable for rebated door leaves. In these, instead of wings, there is a pair of pins for each part of the structure. These pins are screwed into the canvas and box. The advantage of this type of hinge is that it is possible to adjust the distance between the hinge and the canvas - you only need to have a hex key. The set includes decorative caps that cover the pins. The colors are varied.

Concealed hinges are a fairly new trend on the market. But they have already gained popularity with consumers. The secret of success is in these features:

• the peculiarity of their device is such that when the door is closed, all parts are hidden - such a hack will not work;
• the design features of the hidden hinges make it possible to adjust them in three planes;
• finally, the complete and aesthetic appearance will satisfy the most demanding taste.

The concealed hinges are arranged a little differently from the above options: the hinge is attached directly to the door frame, it is hidden inside the metal case. Docking of the hinge with the canvas is provided by a lever in the shape of the letter "P". This lever consists of a pair of parts, fastened with a screw, and when the door is closed, the latter is hidden in a recess (in a loot).

There are also so-called end or heel loops. They have not found widespread use. Most often they are installed on glass doors. End options for devices are easy to install and have a low cost. The advantage of heel types of hinges is that during their installation the door leaf does not deteriorate - the hinge is installed on a part invisible to the eye. This makes it possible to change the side of the door opening at any time.

Another type of loops is Italian. Their peculiarity lies in the method of installation. The hinges familiar to everyone are attached from the side of the door and into the frame, and Italian hinges are installed at the top and bottom of the door leaf. At the same time, it visually seems that the door is floating in the air. The aesthetic appearance of the door also attracts consumers. In addition, Italian hinges have high strength, reliability and quality, they can hold massive doors made of natural wood weighing up to 75–80 kg. This is an indisputable plus, given that the Russian mentality implies the installation of massive, solid doors.

The main emphasis when choosing hinges for interior doors should be made on what exactly the structure of your door leaf and doorway is. Pay attention to the following details:

• with or without a recessed door;
• what is the maximum weight of the canvas and its width;
• how often the door will be used;
• what is the direction of opening the flaps;
• how important is the level of protection of the door from burglary.

In any case, it is not recommended to save on door hardware - it is better to put a quality product with a good consumer history. Cheap fake hinges will quickly sag, and as a result, the process of selecting new hinges, which will have to be spent more money, will start again.And after purchasing the loop, you will need to change it, spending a lot of time on work.

When choosing door hinges, pay attention to their dimensions. Light doors - up to 25 kg - you can choose hinges with a length of no more than 7–8 cm. A heavier door leaf - up to 40 kg - requires larger hinges - up to 10 cm in length. Solid wood doors, which have impressive weights, suggest the installation of hinges with a wing length of at least 12-13 cm and with an increased diameter of the central axis.

Before you buy a product, carefully examine it right in the store. Open the card-type hinges, examine carefully, shake the plates - there should be no backlash, squeak (for high-quality products, the wings are tightly pressed against the axis). The hinges themselves should have a flat surface, without bends, distortions or abrasions.

There is a huge selection of all kinds of door hardware on the market, which includes door hinges. Domestic and foreign manufacturers are trying to outdo each other in quality, design, variety of materials and sizes of door hinges. Among the many companies specializing in this product, you can appreciate some of them.

Italian hinges from the manufacturer "Class" have been leading the market for many years. The company specializes in the production of classic hinge models.

Also worth noting is the company "Archie", which produces any elements of door fittings, including mechanisms for the installation of sliding door panels.

Manufacturer Fadex srl also produces a wide range of premium quality door hardware. The company has repeatedly received international awards of the highest level.

Company Hettich Sensys very popular in Russia, its fittings are excellent for massive doors, and have a beautiful appearance. And the big name of the manufacturer maintains its reputation at the level.

Well-known brand Blum - a manufacturer of all kinds of accessories, distinguished by the fact that it produces hinges with installed door closers. The selection schemes for hinges and their installation are as clear as possible to the consumer.

Salice - a company that manufactures a small product range of products. But it is distinguished by conscientious execution. Despite the small selection, the quality of the goods is high and does not cause complaints from consumers.

Manufacturer ratings are diverse. Ultimately, the choice of door hinges rests on design preferences and the aesthetic perception of the room. But still, one should not lose sight of the issue of the strength and strength of the future structure. Door fittings are selected based on the massiveness of the door, taking into account the weight of the door handles and locks.

If you have at least a little experience in repair and construction, you can mount door hinges and install them yourself. Naturally, the installation process will require certain tools and auxiliary materials. You will definitely need:

• the loops themselves;
• screwdrivers or screwdriver;
• self-tapping screws and screws of different sizes;
• wooden wedges (needed to set the level of the door);
• level;
• chisel;
• hammer.

After the preparatory stage, you can start assembling the structure.

It is important to correctly mark the door and frame - the slightest error will lead to a skew or sagging of the door. Use a pencil or a washable fine marker to mark up. Above and below, it is customary to retreat a distance of about 20 centimeters.

When leveling the door position, pay attention not only to the vertical plane, but also to the horizontal. If the vertical level is not observed, then the door will subsequently open all the time, and the incorrect horizontal will become an obstacle to its tight closing.

Regardless of which door is chosen for the room, hinges of a modern level of quality are able to ensure its long service, performing the function of support and support. The choice of high-quality door hardware is a guarantee that the door will be functional, quiet and suitable for your interior.

For information on how to choose the right door hinges and door handles for interior doors, see the next video.