Door frame thickness of interior doors

Content
  1. Door dimensions
  2. Measurements
  3. Selection Tips
  4. Block assembly
  5. Examples and variants

Sooner or later, the owner of the house has to solve the issue of replacing the doors. An old door leaf can be broken, outdated in design, and disliked by its appearance. Sometimes you have to increase or decrease the doorway, for this you need to know how the thickness of the door frame is measured correctly. We will talk about issues related to self-installation or changing doors in our article.

Door dimensions

This work is not very difficult, and an amateur who knows a little how to own the instrument can cope with it. It is very important to do everything consistently and strictly adhere to the technology.

There are standard door leaf sizes on the domestic market. This is due to the fact that the equipment on which the doors are made has standard width formats: 60 cm, 70 cm, 80 cm, 90 cm.

At the same time, the height remains constant - two meters. Often, non-standard doors are required, the height of which can be up to 3 meters, and the width - one meter.

If the customer requires other sizes, then the price will be higher for the following reason:

  • Reconfiguration of equipment.
  • Extra time spent.
  • Manufacturing of a product according to an individual order.

Some customers order double sliding doors. The production of such products is much more expensive. Often, expensive non-standard materials are used, for example, mahogany.

Before making any order, it is recommended:

  • It's good to calculate everything.
  • Decide on the material.
  • Take off all dimensions.

The most reasonable option is to call a master who will make the product so that he personally inspects the "front" of future work. A professional person will be able to perform all organizational work faster and more clearly. Also, a specialist will give qualified advice on the door block itself and its further operation. If you have a firm desire to install the door yourself, you will have to study the process of measurements and installation a little so that the end result does not disappoint.

By measuring the opening for the door, you can choose a completely new location for its location, which may be more convenient. Always leave 20-30 centimeters of indentation from the wall to the door, so that a switch can be installed there, and the door also has the ability to open at an angle of more than ninety degrees.

Be sure to check if it is possible to cut a new doorway in a particular wall.

If the building is old, then an extra opening can provoke the destruction of the wall.

Measurements

The door frame is a U-shaped or O-shaped structure. The latter option occurs if a threshold is provided. The element is fixed in the opening, the door leaf is hung on it.

The profile of the door frame has a non-rectangular structure, usually a ledge of 0.5-1 cm is the ledge with which, after complete installation, the door will slam, because of which it will open in one (desired) direction. On this very ledge, in some assemblies, rubber noise insulation is attached, which also prevents the canvas from being damaged during use and the door slams gently and smoothly. But this ledge also conceals the opening space a little, and as a result you get not 60, but 58 cm wide. This point should be taken into account when you plan to carry furniture or interior items through the installed door.

It is also worth noting that during the repair, the door is installed last.Usually, the ceiling, walls, floor are made first, only after that a master is invited to install doors and platbands, if necessary. Of course, sometimes the ceiling can be left for the completion of repair work, but the floor with walls is what the future door will be fastened to, and therefore it is worth taking care of their finishing in advance. To do this, it is necessary that the width, height, depth of the opening for the dimensions of the new door are correctly calculated.

How to correctly remove these dimensions, consider the example of a door leaf with dimensions of 2000 by 60 cm:

  • At a height of 200 cm, you need to add 3-4 cm (the thickness of the MDF, chipboard or wood board that you are going to install). Add 3-4 cm (the opening between the board and the wall for a good fixation of the foam and wooden pegs), so 200 + 4 + 4 = 208 cm (masters advise adding no more than 10 cm, 6-8 is ideal).
  • With a width of 60 centimeters, we do the same - 60 + 4 + 4 = 68 cm or 60 + 3 + 3 = 66, you can take the average value - 67 cm (no more than 10 cm for secure fixation).

A gap of 10 cm should be left only if you are not sure about the dimensions of the future door and are going to change it over time for another. This will make it easier to enlarge the opening for subsequent work after a certain time.

It is recommended to pay special attention to MDF or chipboard boards, their width is usually up to 5 cm. Which one is better to put, it is recommended to consult with the master.

Veneered doors have a larger frame size due to their top coating.

When forming a doorway at the stage of repair, the floor covering should not be overlooked. Some laminate substrates are more than one centimeter wide, or when pouring the floor, 2-5 cm can go away, even ordinary linoleum takes from one centimeter. This must be taken into account so that later the classic mistake of novice craftsmen does not turn out, when the prepared height of 2.08 m turns into 2.01 m.Often it is necessary to cut off a piece of the top of the opening again for optimal door installation. If you do all the preparatory work correctly, then it will be easy to install a new door.

The standard thickness of the door frame of the interior door is 3.5 centimeters. Today, the production of boxes of non-standard sizes is increasingly common (in everyday life they are called lightweight). Their use is due to the need to install the canvas a little wider in size.

When determining the thickness of a doorway, the following points must be considered:

  • In standard houses, up to plastering the walls is usually 7-10 cm, which makes it possible to have sound insulation between rooms at a low level. Plaster usually picks up 1-5 cm, this certainly makes the sound quieter when passing through the wall.
  • Well, if you decide to install a profile with glass wool, then you can safely add all 10-15 cm to the additional board when ordering a box. The opening is supplemented with such boards if the standard quantity (7-10 cm) is not enough to completely overlap.

Selection Tips

Additional boards

Additional boards (planks) are of two types - telescopic and ordinary. The usual additional plank is just a wooden board, cut on both sides (on one side it rests against the box, on the other - with a platband, if you look at the door in section). Telescopic is a box with special grooves inside for installing additional elements or platbands. Telescopic is the most convenient and durable option, because the fasteners will be less exposed to mechanical stress during installation and, as a result, will last longer than ordinary additional strips.

Fittings

Hardware for doors on the market today is a fairly popular and diverse product in style and shape. The best models are now being made in Italy, France and Spain, but domestic production has recently practically not yielded to European counterparts (except in price).

When choosing accessories, it is recommended to pay attention to the material from which it is made, as well as various "minor" little things that speak of the manufacturer's conscientiousness.

Door salons usually work for a long time with the same supplier, for the quality of which they are responsible. You can always make a return or change the purchased products and again choose hinges, locks, handles yourself. If it is not possible to install the fittings, it can be done by a call technician.

Block assembly

Installation of a door block (door leaf + box) is not always carried out by specialists precisely on foam for installation, but any of the methods implies the use of such. There are various techniques for the type of additional fasteners that are used during installation. Mostly spacers or pegs made of wood are used, they are inserted into the cavity between the opening and the box. With the help of such elements, the block in the opening is also aligned according to the mounting level: each peg must be driven in tightly so that the box does not turn out to be deformed, and the entire block is firmly held in the opening.

When the new doorway is firmly secured with wooden stakes, use. It is very important to use horizontally placed stakes inside the space from the box to the wall, so that after expansion the foam does not cause visible changes in the structure of the box. It is recommended to ensure that there are no distortions, the doors in the section must remain within the specified dimensions. All this will guarantee that the door will serve for many years.

After applying the polyurethane foam, it is advisable not to use the door for some time, but to leave it closed for a day (until the foam completely solidifies, in order to avoid deformation of the box).

Examples and variants

The door leaf should be chosen based on the fullness of light in the room where the new door will be installed. It is even possible to install completely glass, frosted or sandblasted doors, if the purpose of the room behind the door allows it. Through such doors, sunlight will penetrate well, which will save on electricity and, moreover, daylight is much more favorably perceived by the human eye.

This, of course, should be taken into account if the door with its canvas completely blocks the natural light from the windows opposite. Pay attention to the options for door leaves with glazing elements.

The most popular door frame size among experienced repairmen is 2 meters by 70 centimeters. Such doors will be most convenient for moving furniture and interior items through them.

MDF doors in their environmental friendliness and practicality are many times superior to their chipboard counterparts. Although in their manufacture they are very similar, the fine fraction is more resistant to moisture and mechanical stress than chipboard. The difference in price is slightly different, but a person who installs doors constantly and has experience in operation will immediately advise you to choose MDF material for a number of excellent qualities.

After watching a huge number of video instructions on the Internet, you can independently install the entire door block without resorting to the help of specialists. Of course, it will take a little longer the first time, but it is worth it not only in terms of cost savings, but also in terms of gaining experience through personal trial and error.

Awareness that the owner of the premises personally with his own hands:

  • meticulously filmed the dimensions of the door frame;
  • processed the doorway;
  • installed a door frame and fittings;
  • correctly decorated the canvas with platbands, it cannot but cause a lot of positive emotions.

See the next video for more on this.

no comments

The comment was sent successfully.

Kitchen

Bedroom

Furniture