Doors "Argus"

Yoshkar-Ola plant "Argus" has been producing door designs for 18 years. During this time, its products have become widespread in the Russian market, thanks to the high indicators of product quality and the relatively low level of prices for it. The company produces entrance and interior door blocks of standard sizes and according to individual orders.

The main difference between Argus doors is a high level of reliability and unique performance properties.

In the production of door structures, quality is controlled at every stage: from the receipt of raw materials to the delivery of finished products to the warehouse. The materials from which the door will be made pass obligatory laboratory control. During manufacture, the doors are tested for compliance with regulatory indicators. Interoperational control is also carried out, during which products are checked according to 44 criteria. Before the doors arrive at the warehouse, a complete check is carried out for the presence of defects. Acceptance tests of products are carried out once a quarter.

The competitive advantages of Argus door blocks are achieved due to the following indicators:

• Increased strength and rigidity of the structure, which is ensured by the presence of horizontal and vertical stiffeners with a total area of ​​about 0.6 sq. m. A quarter of the door leaf is occupied by the ribs located vertically in the center. No welded seams are used in the construction of the steel door block, the door leaf and frame are made of a solid sheet of steel, thereby achieving even greater rigidity;

• High quality indicators of welded seams. The doors of this manufacturer are distinguished by uniformity and the same density of the welded seam. This is achieved due to the fact that in the process of assembling the door block, semi-automatic and contact types of welding are used, which makes it possible to see the process of creating a seam. Due to the narrow heating zone, the steel does not deform, and the use of a shielding gas prevents the oxidation of the steel melted during the welding process. Modern welding complexes make it possible to make almost perfect welds;
• High quality steel sheet coating. Polish and Italian paints and varnishes based on polyester resin are used for painting steel doors. For each type of coating, the manufacturer has a conclusion of the sanitary and epidemiological supervision. The powder coating has a homogeneous structure, good adhesion properties, and is resistant to flaking and corrosion. Such high performance is achieved thanks to the fully automated painting process;

• Natural materials. Interior doors are made of solid pine;
• Volumetric seals. The sealing strip for doors is made of high-quality porous rubber, which adheres extremely tightly to the structure, completely filling the free space between the frame and the door leaf. The rubber seal retains its working properties even at low temperatures (up to minus 60 degrees);

• High quality fillers. Environmentally friendly Knauf mineral wool made from natural fibers is used as a filler in Argus door blocks. Located in the form of cells, they allow you to save heat as much as possible, isolate the room from cold air and noise.This kind of insulation is also beneficial in that it can withstand high temperatures;
• Strong hinges. The hinges used in the manufacture of door structures have high strength characteristics and are capable of withstanding a weight nine times the weight of the door leaf itself, and are designed for 500 thousand openings and closings. A door with such hinges has the softest possible movement;

• Reliable clamps. The latches installed inside the door structure reliably protect the room from burglary by cutting the hinges. There are special holes on the door frame, into which the pins enter when the door is closed. The holes are equipped with special plugs;
• Quality components, materials and accessories. The manufacturer has certificates of conformity for all components. Locking systems and fittings used in the manufacture of doors are made of stainless steel or other materials that are resistant to the external environment. Argus entrance doors are equipped with METTEM, Kale, Mottura, Cisa locks. In addition, the company has mastered the production of its own locks, which are also successfully used in the construction of door blocks;

• Decent decoration. The developers of the design of the entrance and interior doors of the company offer a variety of design options for paintings - from classic to modern models. The lineup of the company changes regularly. The presence of its own production of stained-glass windows, MDF panels, color printing, artistic forging allows the company to bring to life any ideas of designers;
• Manufacturing speed. Thanks to the use of robotic technology in the production process, the manufacturing time of door blocks is reduced.

The Argus company specializes in the production of entrance and interior doors. Let's take a closer look at each category.

Entrance metal doors are produced in the following series:

• "Builder" - a series of doors at affordable prices, designed specifically for residential building companies. This series is represented by two models: "Builder 1" and "Builder 2", which differ in the type of filler (in the model “Builder 1” - honeycomb filler, in the model “Builder 2” - foamed polyurethane foam) and interior decoration (in the first model, EPL was used , in the second - metal);
• "Economy" - doors made in classic design with external polymer-powder coating and MDF panel inside. Door leaf - solid bent steel sheet. Internal filling - foamed polyurethane foam. The doors are equipped with burglar-resistant locks. In this series, the line of models is represented by the following names: "Grand", "Express", "Economy 1", "Economy 2", "Economy 3";

• "Comfort" - the series most beloved by the consumer. The outer coating of the canvas is powder. The filling is mineral wool. The door structure is equipped with safe-type locks. The "Comfort" series is represented by three models, which differ from each other in the type of interior decoration;
• "Monolith" - a series characterized by a variety of models and finishes, both on the outside and on the inside. These are sealed and silent designs. The filling is mineral wool. Door structures are equipped with two safe locks and anti-removable hinges. The "Monolith" series has the most models - 6;

• "Argus-teplo" - a special series of "warm" doors for installation at the "cold-warm" border. These are the so-called doors with a thermal break. Suitable for outdoor installation in private houses. There are 3 models in the series - "Light", "Classic", "Premium". Actually, there are only the last two models with a thermal bridge in this series;
• Special purpose doors - doors with opening inward and fire doors. The fire door has a class EI60, thickness 60 mm, the door frame is glued with thermal tape around the entire perimeter, equipped with a fire lock and a fire handle, inner filling is a basalt fire-resistant board Rockwool. The inner door, used as a second door in the room, has a thickness of 43 mm, its sound insulation is ensured through the use of polyurethane foam as a filling. Outside, the door is metal, inside there is a laminated panel.

According to the warehouse program, the plant offers two door models: "DS Standard" and "DS Budget".

The door structure "DS Budget" has an open box, door leaf 50 mm thick, reinforced with stiffening ribs, filler - honeycomb, outside - powder coating, inside - EPL. "DS Standard" is distinguished by a closed door frame, door release latches, door leaf thickness (60 mm), filling (mineral wool sheets), locks (class 3 and 4 in terms of burglary resistance).

Argus door blocks can be finished in the following ways:

• Painting. Before painting, the metal surface is covered with a special film that prevents corrosion. Next, a polymer coating is applied by spraying. After that, the painted product is exposed to high temperatures in a special oven. Powder-polymer spraying is the most reliable option for decorating an entrance door, since it is this method of painting that protects the metal from rust, temperature and mechanical influences;
• Use of laminated MDF panels. This method of decoration allows you to imitate natural wood. Panels can also be multi-colored, with rattan, glass inserts, with forged elements;

• The use of forged elements. Forging is more often used for the design of doors in private houses, restaurants, office premises. It gives additional elegance and sophistication to the door design;
• Using mirror elements, sandblasted panels, flooded stained-glass windows.

Metal doors are available in the following dimensions: 2050x870 and 2050x970 mm.

In the manufacture of entrance metal doors, the Argus company uses the following materials:

• steel profile;
• mineral wool slabs;
• cork sheet;
• isolone;
• isodome;
• sound insulation;
• expanded polystyrene;
• rubber compressor.

Interior doors of the Argus company are presented in the following series: Bravo, Avangard, Dominik, Armand, Victoria, Verona, Julia 1-3, Neo, Etna, Triplex "," Siena "," Prima "," Classic "," Venice ".

Interior doors are 2000 mm high and 400 to 900 mm wide (in increments of 100).

Interior door structures are made of natural wood (solid pine) and covered with three layers of varnish, thereby emphasizing the structure of the wood. At the request of the customer, the doors can be completed with glasses of different colors, with or without a pattern.

The most widespread are simple models of entrance doors with a reasonable price. This applies to the series "Builder" (they are well sold by construction firms), "Economy" and "Comfort", which have an optimal ratio of quality and cost indicators.

Doors with increased burglary resistance, such as models of the "Monolith" series, are also popular. They are equipped with class 3 and 4 locks, protection of the lock zone, armor plate, anti-removable clamps, additional stiffeners are provided. For safety reasons, in the area of ​​the crossbars, the box is reinforced with a profile.

It is rather difficult to determine the degree of popularity of certain models of interior doors, because the volume of their sales is determined only by the preferences of consumers at the moment, and not by their functional features (with the same level of quality for all models).

The choice of any door, whether it is an entrance structure or an interior one, primarily depends on where it will be installed.

When choosing an interior door, the main criteria are appearance (color, texture, design, style) and quality of construction. The situation with input blocks is somewhat more complicated. Here you should start more from the room in which it is installed.If the door is for an apartment in an apartment building, then it is better to pay close attention to the safety and reliability of the lock system.

Soundproofing properties are important when installing a door block in an apartment. Designs with the first class of sound insulation are best suited for this. The exterior decoration of the door to the apartment can be simple - powder-polymer, so as not to attract undue attention. But if you wish, you can decorate the door with decorative MDF overlays. The interior design of the door depends only on the wishes of the customer. You can choose any color and design that matches the style of the apartment interior.

If the door is necessary for installation in a country house, then it must have high security characteristics. The door structure must have a reliable locking system, additional protection of the lock zone, and latches that protect the door from being removed. Another important criterion that you should pay attention to when choosing a door for a private household is how well the door structure will protect the house from the cold, whether it will freeze or be covered with condensation. For such cases, the company produces the Argus-Teplo series, which includes models with a thermal break. As a heater in such doors, not only mineral wool slabs are used, but also additional thermal insulating layers.

Do not install door structures on the street that have a non-waterproof MDF coating, since frost or condensation will form on it, which will lead to a quick failure of the decorative panel. Street doors should also have two, or preferably three, sealing contours and not have a peephole. The door frame must be insulated.

If the door is necessary for installation in an office building, then its appearance should reflect the status of the organization that is located behind it. Here, special attention should be paid to the decorative design of the door leaf. It can be a massive antiqued overlay, or forged elements, or a glass insert with a pattern. It is better to equip doors to office premises with handles and door closers in order to ensure their long-term operation.

If the door is purchased for installation in a technical room, then the design is best to choose an extremely simple and inexpensive one. Since technical rooms are most often not heated during the cold season, the door should be metal both outside and inside.

Recently, cases of fakes of "Argus" door structures have become more frequent. Under the brand of the company, unscrupulous manufacturers produce low-quality structures that do not perform their protective functions well, their seal breaks, paint peels off, canvases sag, and so on.

Therefore, the manufacturing plant pays special attention to this of its customers. He even posted instructions on his official website on how to distinguish real doors from fake ones. The company in its appeal focuses on the fact that it has the only production in Yoshkar-Ola and the only trademark.

The main attributes indicating that the door was actually produced at the Argus plant:

• company logo in the form of: an embossed stamp, a welded oval nameplate or a glued rectangular nameplate;
• passport for the door structure;
• number - indicated in the product passport, on the packaging and on the door frame;
• corrugated cardboard packaging with brand names.

Customer reviews about the door designs "Argus" are quite diverse. Most buyers note an attractive appearance, especially from the inside, good quality, reliability of locks, ease of maintenance. reasonable cost and fast delivery. Negative reviews are most often aimed at poor-quality work of door block installers.

Professionals note the high noise and heat insulation properties of doors, high burglary resistance of locks, smooth movement of the door leaf, the use of natural and environmentally friendly materials in the production process, a wide range of models, and a variety of finishing solutions.

You will learn more about Argus doors from the following video.