What is tes and how is it used?

The characteristics by which the type of building material is selected for a particular work, first of all, are indicators such as compliance with aesthetic standards, as well as the level of strength. Today, Tes is gaining popularity again in wooden architecture due to its high quality and reliability.

When the question arises of how to carry out the installation, while simultaneously combining the external beauty of the cladding and its durable operation, builders come to the aid of such material as tes. Those who are already familiar with it will surely note the large number of advantages in using it. What is it and why does a hewn board have fewer disadvantages than other wooden products for construction?

The length of the boards reaches six and a half meters, the thickness, depending on the purpose, is from two to two and a half centimeters. Width - about ten cm.

Boards are trimmed during the manufacturing process, so they are often used for beauty in external cladding, this is how the edged board differs from the block. Plakhs do not cut smoothly and the edges are left, the planks are intended for rough structures: fences, roof frames and other supporting structures. The thickness of such lumber is 4-5 cm, the width is from 1.2 to 3 m. The length is 3-6 m.

Unlike solid wood, the wood is a semi-finished product, that is, it has already been processed with a special tool. Quality workmanship is important because it avoids brittleness and other negative effects.

Tes has an impressive number of benefits.

• Basic requirements are imposed on a building material in production so that it can perform the required functions and show its best properties, namely: resistance to various destructive factors (natural precipitation and other phenomena, as well as mechanical stress), good heat conductivity, insulation from noise when used as a partition or sheathing. Since the boards are made of coniferous wood of exceptional hardness (such wood is larch, pine), they serve for a very long time in various structures built from them.
• The eco-friendly natural teos fell in love with its unusual appearance, the possibility of using it in many areas in construction, for its ease of operation.
• Indeed, for seekers of original solutions in the arrangement of the interior and design of buildings, tes is a real find. After all, now there is something to sheathe the walls inside and the facade outside. Tessellated roofs are a reliable roof that will not leak or collapse, it is resistant to vibration and even shock. Structures decorated with timber can be favorably distinguished against the background of boring concrete buildings. Log structures will appeal to connoisseurs of traditional antiquity.
• The thermal conductivity of the building material plays an equally important role in the construction of buildings. To maintain a constant temperature inside, this figure must be high enough. Planks are good because in the cold season they do not let the cold pass, and when it gets warm, they do not allow the scorching rays to heat the air inside the walls.
• Many people know what kind of discomfort excessive noise causes when raindrops drum on the iron sheets of the roof. But during bad weather, Tes successfully blocks the sounds of the raging elements. High noise isolation also allows sounds to be muffled in various parts of buildings so that they are not spread throughout the entire area.
• Among other things, although lumber must be made with special precision in processing, its use and work with it is distinguished by the ease of implementation of construction work, if there is an initial knowledge of the installation rules. The tes is easy to install and is specially manufactured to ensure convenient and reliable operation. This is achieved thanks to the dimensions of the boards.

The use of such a material means the effective use of natural wood as a budget, durable and wear-resistant cladding.

In order for the material to serve for a long time, it is important to remember its features and apply it correctly, carry out its care.

• It should be borne in mind that there is a danger of wood fire if the fire regulations are not followed. So do not make bonfires near wooden structures. Chimneys must be installed in strict accordance with the established rules. It makes sense to treat the boards with compounds that have flame retardants that protect against ignition in the components.
• Harmful microorganisms have a destructive effect on wood, they can violate the integrity of the material. Especially so that the boarding does not suffer from these biological factors, you can treat it with an antiseptic. The effect of many substances is enough for long 3-4 years after application, so this procedure does not require frequent carrying out, but is necessary at a certain time.
• The tree is characterized by deformation, which is important to consider when working with it. Teos shrinks, contracts and expands. These changes are due to the influence of external factors such as humidity and temperature. This is why the fasteners must be flexible.

Tes are made using rip sawing technology. Currently, it has been improved so much that it has become possible to easily obtain smooth boards by making them with your own hands or buying them in stores. The principle of manufacturing is that the log is sawn into flat blanks. A machine is used for this purpose.

An unedged look can be made by cutting the tree, but if you do not completely remove the bark and bast.

The basis from which the board is made is a log, and the longitudinal width of the tesa depends on the size of its diameter, the standard of which is 10 or 11 cm.

It is best to choose hardwood lumber, then even with a small thickness, the same fracture strength is maintained as thick wood planks from softer wood.

Pine and Siberian larch are of the highest quality. On the pine, paints, coatings and other compounds are well adhered to, saving from fungus and negative deformations. Tes is light and dense in structure. High resinous larch is similar in strength to oak and is a rare type of wood that does not burn as much as others.

Branches and the image of a tree, mountains or bodies of water are depicted by the precise work of machine tools.

The fibrous structure can be left intact if the log is hewn in layers. And so that the tree does not undergo rotting, the negative influence of environmental factors, at the end of manufacturing the boards are treated with wax or oil.

Particular attention is paid to the quality of the tools that process the wood from which the future roof or facade is created. The quality of the entire structure is directly determined by how conscientiously its constituent elements are made.

If any defects were found on the board, they must be removed in order to stop the deformation process. Chips and other irregularities are smoothed out with a knife, sealed with a homogeneous insert. It is better to cover cracks using paint. This is another advantage of this material - the ability to repair breakdowns, and it must also be replaced.

Another equally significant factor is the moisture content of the wood. To create high-quality sawn timber, only dried wood is taken (moisture level no more than 15%).

Processing of structures is carried out only on a dry basis.

The history of the production of the material began in antiquity. How was the manufacturing process in ancient times? The logs were split with wedges, and then the workpieces were processed with axes so that the log was smooth. The advantages of the building material were already appreciated at that time, however, the great complexity was a hindrance. This is not surprising, because there were no special tools, and manual labor took a lot of time and did not always bring a better result than modern machines.

There are several types of boards, features of use in construction work. First of all, the tees is divided into edged and unedged.

It is easy to distinguish it: the edged edge has a rectangular cross-section, the edges of this board are always carefully cut perpendicular to the faces, there are few defects. There is an option when the tes is cut off only on one side. It is made from wood such as spruce, pine. Lumber is very popular and is chosen more often, in contrast to unedged timber.

Decorating and decoration of premises is carried out with trimmed blanks. Thus, this option is ideal for fine construction. The material, made directly from the solid wood itself, is very durable and resistant to fungi.

There is a wide selection of edged boards - there are different cross-sectional sizes, allowing you to choose a building material that is exactly suitable for the construction in which it will be used. The standard ratio is as follows: double thickness is less than width. For example, planks 25x150x4m and 25x100x6m are widespread.

Such a wooden building material is produced with wane, and it also found its place for solving various problems, including the construction of temporary huts. The edges are either left not sawn off, or they are not completely sawed off. The cut can be radial and combined.

The wood has the same strength properties as the edged gut. The unedged type is used in rough work. Suitable for formwork, it also makes reliable scaffolding at construction sites.

Builders purchase such a piece, and then they independently process it with a tool, in this way getting an edged board for a lower price. This is an unedged joinery, which is one of two existing types. Another unedged lumber is called fence lumber.

Materials differ in moisture content, shape and number of defects.

When determining the dimensions, the parameters must be considered for both layers with half the wane on each side: for example, there are unedged boards 25x6m, 50x6m.

Among other worthy characteristics of natural moisture sawn timber, breathability stands out. This extremely useful property does not allow the formation of a large amount of condensation; with the right approach to construction, there will be no problem of rotting.

In buildings sheathed with planks, there is always a comfortable microclimate - in winter such rooms do not freeze, in summer they are not afraid of stuffiness.

The jobs in which the boards can be used are varied. Edged gully is the most stable and stable in structure, it is often used in furniture construction, building roofing, construction of fences. You can lay the floor with a spade; wooden stairs are made with it.

Since the material is lightweight, it is easy to install. Roofs from tessellation are made in different ways: by laying tessellation in two layers and installing it in one layer (for example, in a "runaway"). A double-layer roof is better protected from leaks, because the board is stacked in a continuous manner in a checkerboard pattern, and water cannot get into the junction of the individual boards. Laying can be longitudinal and transverse, the creation of grooves contributes to the rolling of water, and various platbands and cornices will serve as the decoration of the roof.

So, in the rough construction of the floor, to strengthen the structures - in general, in construction, where appearance is not important, unedged timber is used. This can be a fence, a barn and other outbuildings.

Anyway, wherever a test is used, it is better to give preference to the highest quality processed materials, irregularities on the boards can become significant obstacles.