Hydraulic Jack Oil

Hydraulic jacks are devices designed to lift, hold and move bulky items. Despite their small size, these devices are capable of lifting many times their own weight. But for the jack to work properly, it is necessary to properly care for it, for example, lubricate with oils for better functioning. Know which oil is best to use for these purposes.

In order for the jack to work properly, it must be lubricated with special oils. Moreover, not all types of such a lubricant are suitable for this. Only funds that meet certain requirements can be used.

1. The product must necessarily be made on the basis of a base hydraulic fluid, which, in turn, is a refined product.
2. The viscosity of the substance is one of the key selection criteria. It is important to know that during storage it decreases, therefore, it is initially necessary to purchase funds in which this indicator is above the average. It must be indicated by the manufacturer on the packaging. The higher the viscosity index, the better.
3. The filtration rate is a measure that indicates the quality of the oil. The cleaner it is, the less foam will form when it is poured into the jack. At the same time, it is important to understand that it is impossible to check this indicator before buying. Therefore, experts advise purchasing oils from well-known reliable manufacturers.
4. Anticorrosive properties can significantly extend the life of the jack and use it without fear of damage during operation. Therefore, preference should be given precisely to the means with these properties.

Therefore, first it is necessary evaluate temperature range and choose the oil in accordance with the data obtained.

Today, several types of this tool are used. Many believe that, in principle, there is not much difference than filling the jack. You can fill in any product that is intended specifically for hydraulic equipment and tools, in particular for jacks. This is partly true, but each type of oil has its own specific properties that can be useful or even necessary in certain conditions. There are currently several different types of oils on the market with different characteristics.

Such oils are approved by many experts. They do not contain any harmful or foreign impurities in their composition. However, the cost of such funds is quite high. The products are highly efficient and lubricate well. Despite being water-based, they also have high anti-corrosion properties.

An important advantage of such oils for hydraulic jacks is that they can be used at any ambient temperature... Even down to –30 °. There is one more feature: glycol oils can be poured not only into hydraulic ones, but also into other types of jacks and other devices.

Such funds are present on the market in the widest range, and their price is often significantly lower than the cost of other types of these products. But mineral oils are not in high demand among real professionals. The fact is that they are created practically from oil waste, and in them the level of viscosity and the level of the lubricants themselves are quite low. The use of such funds is considered perfectly acceptable.

It is these funds that are most preferable to use. They are commercially available in various versions, each with its own unique characteristics. To create such oils, complex multicomponent substances are used, which at the output allow obtaining products that meet the highest quality and safety requirements.

Synthetic oils for hydraulic jacks, allow not only to keep the devices in good working order for a long time, but also extend the service life of tools by several years... At the same time, there are never sudden situations in which the jack fails.

Today there are many brands of these products. However, in order to purchase really high-quality and valuable oil, it is better to give preference to brands of well-known manufacturers. They have been around for years and have received real positive feedback from buyers. First of all, you should pay attention to the products:

• VMGZ;
• MGE-46;
• I-20;
• I-50;
• FUCHS;
• MOBIL;
• CASTROL.

However, there are several important nuances.

1. Products I-20 and similar are not recommended for use in conditions of high humidity. The substances that make up such oils quickly react with oxygen and begin to absorb it, this can deteriorate the properties of the product and disrupt the operation of the jack.
2. For pouring into imported hydraulic jacks, only oils produced abroad should be used. They have a more delicate and gentle composition in comparison with domestic products.

Professional craftsmen also say that it is still better to give preference to imported hydraulic oils. They do not require constant use, but at the same time their physical characteristics are many times better than that of many domestically produced means.

For some reason, some people are sure that, in principle, any oil or even just oil-containing liquids can be used for pouring into a jack. This is partly true. But it should be understood that if you choose the wrong tool, then the lifespan of the jack will be significantly reduced... Worst of all, it can fail at the most inopportune moment, as a result of which the person using it can receive significant injury.

Most often, inexperienced people use brake fluid... It can also have a good lubricating effect. But at the same time, most of its composition is water and substances that attract it. As a result, rust begins to actively form and develop, which ultimately and causes the hydraulic jack to become unusable.

For hydraulic jack, or bottle-type rolling jack, topping up oil is a standard procedure and is carried out in a few simple steps. It should be noted right away that the instructions below are also great for this type of automotive tool.

It is very important not only to choose the right hydraulic oil, but also strictly follow the instructions... Only in this case it will be easy and quick to refuel the rolling jack. It is recommended to wear protective gloves on your hands. The sequence of actions will be as follows:

• disassembling the jack and cleaning it from oil residues;
• be sure to carefully inspect all rubber parts and, if damaged, replace them with new ones;
• reassemble the tool and lower it to the extreme point down;
• the valve head is turned all the way and the stem is strongly pressed;
• a plug is removed from the top of the jack cylinder;
• using an oiler or syringe, pour in the previously prepared oil;
• the oil should be topped up so that its level is slightly below the highest mark, and there are no air bubbles inside.

Now you need to assemble the tool and pump it empty. Then check the oil level again and, if necessary, top up to the indicated mark. The correct implementation of the hydraulic oil refill technique and the selection of the right product is the key to a long and effective service of the device.

In the following video, you will learn how to properly change the oil in a hydraulic jack.