Choosing jacks with a lifting capacity of 3 tons

Jack - a must-have for any motorist. The tool can also be used to lift heavy loads in a variety of repair jobs. This article will focus on lifting devices with a lifting capacity of 3 tons.

Jacks are uncomplicated mechanisms used to raise loads to low heights. These are mainly mobile and compact devices that are easy to transport.

Jacks for 3 tons have their own characteristics, which depends on their type. Hydraulic models are a cylinder with a piston, a reservoir for working fluid and a system of levers. The principle of operation of such a jack is based on the pressure of the working fluid on the piston. When pumping (manually or with the help of a motor) liquid from the reservoir into the cylinder, the piston moves upward. This is how the load is lifted. The upper end of the piston rests against the load being lifted from below.

The hydraulic jack is equipped with two valves: pump valve and safety valve. The first one moves the liquid into the cylinder and blocks its reverse movement, and the second one prevents the device from overloading.

There are lifts in the form of rails and trapezoidal mechanisms... Their principle of operation is based on the mechanical movement of levers or screws, which ultimately influence the lifting mechanism.

A variety of materials are used for the manufacture of jacks: aluminum, heavy-duty steel steel, cast iron. The density of the material affects the strength and load capacity of the mechanism.

Lifting devices designed for a load weighing 3 tons have a small weight - up to 5 kg. Some of them are worth getting to know better.

Jacks are divided into the following types.

1. Mechanical... The simplest lifting devices. The principle of operation is based on the mechanical force to move the working screw.
2. Hydraulic... Jacks of this type work on pumping liquid from a container to a cylinder. Through this, pressure is created on the working piston, it moves upward, and the load is lifted.
3. Pneumatic... The lifting of the load is carried out by pumping air into the container of the mechanism. The devices are structurally similar to hydraulic jacks. Can be run on exhaust gases by connecting to an exhaust pipe.
4. Rhombic... A simple mechanism based on pure mechanics. The design is trapezoidal with a rhombus-shaped lifting part. Each side connects to the other in a movable manner. The sides are closed by the rotation of the stud. In this case, the upper and lower corners diverge. As a result, the load rises.
5. Rack... The basis of the structure is made in the form of a rail along which the lifting mechanism with a pin (pick-up) moves.
6. Bottle... The tool gets its name from the shape. The mechanism works on a hydraulic principle. This type is also called telescopic, since the rod is located in the cylinder (hidden in the same way as the separate knee of a telescopic fishing rod).
7. Lever... The jack has a main mechanism - a rack, which extends when acting on the drive lever.
8. Trolley... The base of the rolling jack has wheels, a lifting arm and a stop base. The mechanism is driven by a horizontal hydraulic cylinder.

An overview of the best rolling jacks for 3 tons opens the mechanism Wiederkraft WDK / 81885. Key Features:

• two working cylinders;
• increased structural strength;
• reduced likelihood of stalling when lifting;
• maximum lifting height - 45 cm.

The disadvantage of the model is too heavy weight - 34 kg.

Rolling jack Matrix 51040. Its parameters:

• one working cylinder;
• reliable construction;
• pickup height - 15 cm;
• maximum lifting height - 53 cm;
• weight - 21 kg.

Double plunger jack Unitraum UN / 70208. The main characteristics of the model:

• metal reliable case;
• pickup height - 13 cm;
• lifting height - 46 cm;
• working stroke - 334 mm;
• ease of use.

Rack model of professional type Stels High Jack / 50527. Peculiarities:

• metal reliable construction;
• pickup height - 11 cm;
• lifting height - 1 meter;
• working stroke - 915 mm;
• the perforated body allows the jack to work as a winch.

Rack and pinion mechanism Matrix High Jack 505195. Its main indicators:

• pickup height - 15 cm;
• maximum lifting height - 135 cm;
• robust construction.

With such a powerful design, the jack is difficult to use from habit. Disadvantage: Effort is required.

Bottle jack Kraft KT / 800012. Peculiarities:

• the presence of a coating of the structure with a protective layer against corrosion;
• reliable and durable construction;
• pickup - 16 cm;
• maximum rise - 31 cm;
• stable outsole.

An inexpensive device has a large grip, so it is not suitable for all low-slung vehicles.

Hydraulic bottle mechanism Stels / 51125. Key Features:

• pickup - 17 cm;
• maximum rise - 34 cm;
• the presence of a safety valve;
• the structure is equipped with a magnetic collector, which excludes the appearance of chips in the working fluid;
• increased service life;
• the likelihood of minor breakdowns is minimal;
• product weight - 3 kg.

Mechanical model Matrix / 505175. Indicators of this model:

• pickup height - 13.4 mm;
• maximum rise to a height of 101.5 cm;
• reliable case;
• smooth running when lifting and lowering;
• compactness;
• the presence of a manual drive.

Pneumatic tool for 3 tons Sorokin / 3.693 has the following features:

• the ability to use on an uneven surface;
• the presence of a hose for connecting to the exhaust pipe (length - 3 meters);
• Comes with a handy bag for transportation and several rugs for safe work;
• the package contains glue and patches in case of damage.

The choice of any tool depends on its destination and terms of use. When choosing a jack for 3 tons there are a number of aspects to consider.

The first aspect to look out for when buying is lifting height. The value determines the ability to lift the load to the required height. This parameter most often varies from 30 to 50 cm. As a rule, this height is sufficient when replacing a wheel or performing minor repairs.

Pickup height - an important factor when choosing. Many motorists consider this parameter to be not so important. However, it is not. The choice of the required pick-up height is determined by the vehicle's ground clearance. Almost all types of jacks with a pickup height of more than 15 cm are suitable for SUVs and trucks. The ground clearance of a passenger car does not always exceed 15 cm, so in this case it is recommended to choose screw, rack or roll jacks.

In addition, when buying, it is worth paying attention to presence of thrust pins and grips... These elements can provide a secure footing and safe operation on the road.

Jack dimensions and weight determine the possibility of convenient transportation and storage. Compact models weigh no more than 5 kg.

Not a single motorist can do without a jack.Lifting devices with a lifting capacity of 3 tons are considered the second most popular after 2 tons jacks. Most models are compact and easy to store in your garage or car. The choice of tool is based on many criteria. But the most important ones are listed above.

You can get acquainted with the test drive of the rolling jack in the following video.