How to make a backlit mirror with your own hands?

In our life it is impossible without a mirror. In shopping centers it is possible to find hundreds of modifications of this necessary interior element. There are, among other things, samples with numerous types of backlighting.

Backlighting is generally considered to be an exclusively decorating component. However, in special cases, the backlight also plays a useful role. Decorating lighting is mounted in the mirror. Multifunctional - illuminates the faces in front of him.

Industrial reflective glass is expensive and rarely meets the tastes of customers. In this case, the illuminated mirror can be made by yourself, and such work will save you from unnecessary costs.

Makeup mirrors and mirrors of a different direction with integrated LED backlighting are gaining more and more fame for a combination of many factors: futuristic design, service comfort, lack of obvious (external) bulbs.

To make a mirror with a built-in LED backlight yourself, you will need:

• Mirror made by special order at a glass making studio based on silicate glass with an alloy by sandblasting and, if necessary, holes for mounting the mirror on the wall.
• Light-emitting diode (LED) tape of the required length, power and degree of protection against moisture.

• Power supply for LED strips with optimal output and outer dimensions.
• Installation cables with a cross section of approximately 0.5 sq. mm for the purpose of connecting tapes to the power supply and a prepared plug with a wire for connecting the power supply to a 220 volt outlet.
• Metal U-shaped profiles for the purpose of installing light fluxes, in addition, strips of snow-white plastic or aluminum, which are part of screens that reflect light.
• Superglue type "Titanium" or a special, non-destructive alloy.

The prepared sandblasted reflective glass is most often sealed behind with a PVC film (self-adhesive).

There are a number of backlight alternatives:

• Installation of external spotlights. A spot is a multi-point light fixture that can rotate in all directions on the support of a special device. These can be single controlled lamps, light fixtures of not very large volume. They can illuminate a person's face at the mirror, a certain part of the bathroom.
• Backlight illuminating the face of the person looking in the mirror. Here, the current LEDs often carry out the work of electric lighting devices. Their illumination is softened by the frosted glass fitted in the mirror. Often, such lighting is arranged in reflective glass, made like a small cabinet.

• Illumination device behind the mirror. It is set for beauty. LEDs light up the glass of the mirror, making it look extraordinary. At the same time, illuminated mirrors of this type are intended as a decorative element of the interior decoration of the bathroom.

It is possible to make an illuminated mirror by numerous other methods.

A large number of homeowners simply reinforce a number of light bulbs with different configurations and structures into the wall. They are identified above the mirror, along its borders. LED strip is often used in the role of lighting components. It looks very impressive, fits into the design of the room and adds freshness to it due to 2-3 color variations.

This kind of highlighting is done very easily. For this purpose, it is necessary to buy a special aluminum profile, mount an LED strip into it and place it with it on the mirror from the required edge. Then the tape is connected to the galvanic system through a special power source. The mirror can be attached to the wall with liquid nails or other glue suitable for mirrors.

Similar methods can be used to embellish cosmetic mirrors on the dressing table. They will certainly appeal to women who care about their appearance.

Based on the dimensions of the mirror, it is necessary to make a frame for arranging the constituent elements from panels 90 mm wide and 20-25 mm thick, thanks to glue and self-tapping screws. The ends of the planks with the support of the miter box must be sawn down at an angle of 45 °. All contacts are furthermore fixed with iron corners. Reflective glass must fit easily into the frame, while maintaining free space at the edges for placement of spotlights. On the border of the frame, holes are drilled according to the volume of the cartridges, which are glued with glue.

A frame is assembled from thin twigs according to the scale of the main frame. She will have to close the cables with herself from the outer edge of the craft and fix the reflective glass in the main frame.

Furniture corners are fixed to the main frame thanks to small screws. A mirror will fit on them. All components are combined into a common system, and the required paint tone is applied to them with cartridges. The framed mirror is also fixed with thin blocks.

The cartridges are combined with one another according to the synchronous scheme by galvanic wires. The power cable is connected to the cables and exits through a deliberately drilled opening.

At the end, you need to screw in the bulbs and control the workflow. Behind the entire system, it is possible to cover with a plywood shield. It can be secured using small nails or self-tapping screws. A very spectacular product comes out - an illuminated mirror.

A mirror of the required shape and volume can be made by yourself. The procedure consists of subsequent stages.

You should choose a flat glass and bring it to the required form. Then thoroughly wash and remove the fat with a 15% solution of hot potassium.

Place the prepared glass in a bowl with cold purified water. Make a mixture of 30 g of purified water and 1.6 g of silver nitrogen. A 25% ammonia solution is added dropwise to this mixture. After the precipitate disappears, it is necessary to interrupt the dripping of ammonia and add purified water in a volume of 100 ml to the mixture. Then you need to take 5 ml of 40% formalin and mix it with the previous mixture.

The glass is taken from the purified water and transferred to a cleaned vessel filled with a previously removed chemical solution. A reaction will appear and will complete after approximately two minutes. After its completion, the mirror is rinsed with the purest purified water. And after washing it is determined in an upright position and dried. The degree of drying heat should be 100-150 ° C. After drying, varnish is applied to the reflective glass.

A mirror, especially with illumination, is able to visually make the space larger and larger, improve its illumination, and add completely new qualities.This mirrored design is suitable for any room, but it is most often found in the bathroom.

This very significant and necessary household object can be supplemented with shelves made of glass and other used materials. The arrangement of various cosmetic accessories on them gives the necessary comfort in using these funds.

The dimensions of the backlit mirrors in the hallway can range from very small to those that occupy an entire wall. In many cases, they are also attached to the ceiling. Neon and LED illumination, exclusive frames and other devices are ready to add an unusual type to the mirror. LED strips of various colors are ready for a long time and function thoroughly with significant energy savings.

Depending on the flight of imagination, the previously trimmed mirror can be embellished with a picture or a sticker, and in addition, the soffits can be arranged in one or another intricate form.

Mirrors equipped with perceiving panels that respond to touch look curious.

For this reason, the independent production of illuminated mirrors is able to grant you an excellent interior decoration component, which will not only become a decoration element, visually enlarging your room, but also illuminate the room with the soft light of diode lamps.

For information on how to make a backlit mirror with your own hands, see the next video.