How to make a stand for a Christmas tree with your own hands?

Having spontaneously changed an artificial Christmas tree (sold with a construction for installation) for a live one, it is not necessary to immediately run to the store for a stand, which you cannot buy in every store. You need to estimate the height of the tree and its volume, the thickness of the trunk, and also remember what kind of house there is a material suitable for making a stand. It can be wood, metal and even cardboard. The main thing is to correctly calculate the proportions of the tree and the stability of the future structure.

A stand for a Christmas tree - both artificial and live - can be made from almost any available means. These can be boards, bottles, or metal bars.

A metal stand, unlike wood or any others, will last longer, but it is more difficult to make. The difficulty lies in the need to be able to work with certain tools (such as a welding machine).

If the tree is small artificial, then it is quite possible to get by using a cardboard box as a material. To fix the tree and give stability to the box, you need to put bottles filled with water or sand in it. A Christmas tree is placed in the center between them and is fixed, for example, with sand, which fills the box, despite the bottles.

Without much hassle, you can make a do-it-yourself tree stand for a Christmas tree. The simplest and most readily available material is moisture-resistant plywood, the thickness of which should be about 20 mm for stability. Only when starting to make a homemade stand, it is necessary to take into account the size of the tree itself. For a small tree, plywood will be the simplest and best option, which is easy to work with.

For a large tree, it is better to use natural timber. It will be more difficult to work with, but this is the only option for living solid wood, which is characterized by obesity, which will cause the plywood stand to turn over.

If there are no animals in the house, you can use a regular glass jar as a vessel with water. If there are pets, then it is better to replace it with something more durable.

Having decided on the material, you need to plan the details. You will need:

• legs;
• base that fixes the trunk;
• fasteners.

It is always necessary to start manufacturing with cutting the base and forming the legs. The base should be round. A hole is made in the center of this circle, the diameter of which should be no more than 40 mm (this is the average diameter of the barrel). The base must necessarily have 3 legs in order for the figure to be stable. The legs represent a relatively long crossbar, which is inserted into the cell cut in advance at the base from the end side.

After the parts are connected, we select nuts and screws, and assemble the structure.

For artificial Christmas trees, a wooden cross is also quite suitable, which does not imply the use of containers with water. Its manufacture is much easier than constructions with containers.This requires 2 boards. A notch is cut along the inner side of one, equal to the width of the second board, which is superimposed on the whole board. A hole is cut in the center of the structure so that the Christmas tree can be inserted. Legs are nailed to the upper board, as well as to the lower one.

You can also make a stand from regular planks without unnecessary cuts. For this, 4 narrow boards are taken, which on one side are nailed to each other so that a narrow square is obtained, and the other side acts as a support (there will be 4 legs).

If live trees are bought every year, and it is not known what diameter the trunk will be, then it is recommended to make an adjustable cross. For manufacturing, you need 3 supports. It is desirable that the length of each is 250 mm. The ends of these supports are cut at an angle of 60 degrees and holes are cut into them for screws for connection. On the outside, 2 parallel grooves are made to cut the hole evenly.

In some cases, you can use the simplest method: making a stand from the most ordinary log. To do this, we cut the material at our discretion (you can horizontally, or you can also vertically). After that, the workpiece must be cut in half. The flat side acts as a support, and from the outside we make a recess for the trunk.

To make a wooden stand you will need:

• long board 5-7 cm wide;
• self-tapping screws, the size of which depends on the thickness of the material;
• tape measure, which can be replaced by a building ruler;
• pencil or marker;
• jigsaw or saw;
• screwdriver or drill;
• nozzle "crown".

As a sketch, we took the model of the "Wooden Rump" stand, which is a rather flexible option. Most wooden models are made using this analogy.

Examine the sketch and use a pencil to mark up the chalkboard accordingly. If the tree is high (about 2 meters), then the bars must be selected more:

1. Using a special tool (saw, jigsaw), cut 2 identical blocks.
2. On the element that will be below, make a groove in the center. Its width should be equal to the width of the second bar.
3. We insert the upper part into the groove, which should fit firmly.
4. In the center of the cross, using a drill with a crown attachment, cut out a round hole.
5. We twist the parts with screws.

If it becomes necessary to put the tree in a container with water, then the legs are extended under the crosspiece. Their height should be equal to the height of the vessel. Having done this, we cut out a through hole in the center, we substitute water under it.

With a number of necessary tools at hand, you can make a beautiful metal stand yourself at home. For this you will need:

• iron pipe cut with a diameter equal to the barrel diameter;
• metal rod made of soft metal with a diameter of up to 12 mm;
• Bulgarian;
• hammer;
• building corner;
• welding machine;
• rust remover;
• paint of the desired color.

The first step is to cut off the necessary part of the pipe, which will be the base.

You need to make 3 legs from a metal rod. Having cut off the desired length of each leg, you need to make two so-called shoulders (the fold is made at an angle of 90 degrees). The bend depends on the height of the base pipe. In order for the figure to be stable, the leg must be made longer (about 160 mm). Of these, 18 mm will go for welding to the base (upper elbow), and 54 mm for the lower elbow.

The finished structure should first be properly treated with a solution from rust, and then it should be painted. You can't do such work at home, everything is done in the garage or shed.

It doesn't matter what material was used to make the stand. It is advisable to properly arrange it after the work done so that the structure looks aesthetically pleasing. Some plan the decoration based on the New Year's decor, while others prefer to give the Christmas tree and stand a natural, natural look.

In the first case, the simplest option would be to wrap the stand with tinsel. Or you can get down to business creatively and make something like a snowdrift under it. For this, a white cloth is taken, which is wrapped around the stand. To add volume, cotton wool can be placed under the material.

If you plan to use it repeatedly, then it is easier to sew something like a white blanket stuffed with cotton wool or padding polyester. You can embroider snowflakes on the blanket made.

When you want the tree in your apartment to resemble a forest beauty, the easiest way is to place the stand in a brown wicker basket. After that we fill the basket with cotton wool imitating snow.

If the legs of the stand are too long to fit into the basket, you can try instead of the basket using a box, which is also decorated at your discretion.

You can see a visual overview of how to create a wooden stand for a Christmas tree with your own hands in the following video.