How to choose a self-adhesive film for the refrigerator and stick it on?

Over time, the refrigerator loses its original attractive appearance, because the coating on its facade can be damaged due to constant use. Of course, you can buy a new thing, but such a device is not cheap. In addition, if the equipment works without failures, it is a pity to throw it away or move it to the dacha. But there is a way out - this is pasting with a special self-adhesive film intended for furniture, household appliances and other interior items.

Film for pasting is a material that can be used to transform the look of an old refrigerator, to make it a bright accent in the interior of the kitchen. This is, without a doubt, the best design option for kitchen furniture, including panels for household appliances, doors, and other items.

The advantages of decorative finishes have made them a popular, sought-after product.

It:

• brightness and variety of colors and images;
• moisture resistance and high heat resistance;
• ease of maintenance and gluing;
• low price.

There are different types of self-adhesive film for the refrigerator depending on its composition:

• based on polypropylene;
• crafted from polyester;
• polyvinyl chloride (PVC).

And also one-layer and two-layer products are distinguished, while the latter have an increased density.

By color, self-adhesive can be of a standard type in the form of fabric, tiles, tapestry with photo printing and the like. But some products are made in the form of imitations of wood, metal, unusual textures.

An interesting option for the restoration of the facade of the refrigerator is a magnetic panel. It is a unique product with a thickness of only 0.5 mm, made of a durable and flexible material that cannot form bubbles. Moreover, such sheets have increased protection against moisture, and they can be cleaned using a damp cloth without fear of damaging the ornament.

Today you can buy high-quality films for every taste in various sizes and with high print quality.

One of these decorative film options with a different type of surface can refresh the look of the refrigeration device:

• matte, allowing you to focus on the play of light and shade in the room;
• colorless (transparent), intended for the design of glass surfaces;
• mirror, which helps to increase the amount of space in a small area;
• shiny, effective in rooms with a lack of natural light;
• film with a stereo effect (holographic), suitable for absolutely all surfaces.

The facade can be pasted over with a plain, two-color or bright multicolored material, covering in the form of velor and velvet, wood, leather or marble. Shiny or mirrored products will make the kitchen look bigger and more voluminous. An extraordinary solution will be a panoramic image, but here it is important not to deviate from the style and tone in which the interior of the kitchen is made.

You can choose any theme for decorating the refrigerator, but designers advise you to stop your attention on decorating with abstract prints, textured products, landscapes and panoramic views, macro photographs, ornaments and patterns that match the overall decor of the room.

Regardless of the product chosen, the surface of the refrigerator is first prepared.

• All products are taken out of it. It is advisable to defrost in advance, to clean the unit from contamination.
• Before pasting, the technique must be dry and absolutely clean.
• Additionally, you need to temporarily remove all removable parts and accessories. This will make it easier to adhere and help to avoid wrinkle defects.
• Ideally, the door should also be removed, and with it the gaskets.
• The appliance can be cleaned with soapy water. This will help to degrease the surface.
• After that, even the smallest specks should be removed from it, which can be noticeable through the thinnest film.
• Places with peeling paint can be carefully repaired with plaster.

The second stage of work is the process of gluing the film itself.

• A piece of film of the required size, taking into account the folds, must be prepared in advance in the same way as the markings on the surface of the refrigerator. To ensure consistency, you can try on the material by placing it on the surface.
• First, one of the upper corners of the product is peeled off and pulled down, then the sticky part is glued, ironed with a soft cloth or rubber spatula.
• The decorative layer is positioned and fixed, gradually sliding downward as the sticky side separates from the top layer. If necessary, it is important to immediately align the film and monitor the uniformity of distribution along the base of the facade, avoiding the formation of folds.
• Since the material is taken with a margin, it is logical that at the end of the installation, the edges of the film will remain at the bottom, but in the future they can be easily hidden behind the seal.

You can also use the wet method of applying the self-adhesive product. To do this, you need a spray bottle, window cleaner, alcohol or dish detergent.

The surface of the device is prepared in the same way. Water is poured into the spraying device with a few drops of alcohol or detergent, then sprayed onto the canvas of the device. The backing is completely removed from the film. The film must be applied to the refrigerator, positioned correctly, at the same time smoothing it from the resulting folds and bubbles. Since in this case gluing does not occur immediately, if the result is unsatisfactory, the whole process can be repeated. Finally, the seal, handles and doors are returned to their places.

Restoring a refrigerator with self-adhesive tape is a simple procedure. Roll material with different texture, color and pattern will not only update, but also make the look of household appliances more modern.

Here are some topical and unexpected solutions for how you can optimize your kitchen interior.

• The bright design of the facade of the refrigerator will look beautiful against the background of a monochrome interior in black and white and gray tones.

• The colors and patterns of the household appliance can be matched to the flooring, textiles and decorative elements of the kitchen.

• Do not be afraid to think creatively - the result can exceed all expectations. As a result, the refrigerator will turn into a telephone booth.

• Panoramic views of cities and streets will spice up the image of your kitchen.

There are many types of film to choose from, but vinyl is the best choice. Although it is more expensive compared to other materials, its quality and appearance are more impressive, and the service life is much longer.

For information on how to properly stick the self-adhesive film on the refrigerator, see the next video.