All about Patriot motor-drills

The domestic manufacturer of Patriot equipment is known to many construction craft enthusiasts throughout the country. This company offers a wide assortment that allows you to choose the right equipment based on your preferences. This manufacturer also has motor-drills available, which are gaining popularity in everyday life.

Before getting acquainted with some of the models, it is worth identifying the features of the Patriot motor-drills.

• Average price. The cost of the product is more than acceptable both for private use and for a small enterprise associated with construction and installation.
• Feedback level. Patriot has a large number of service centers throughout Russia, which allows you to receive competent technical and information assistance in the event of equipment malfunction.
• Ease of operation. Gasoline models do not need special care, in addition, they have standard mounts for many types of augers and knives, which allows you to quickly change attachments.

Patriot PT AE 140D is an inexpensive summer cottage device. This model combines reliability and sufficient power to carry out earthworks of varying complexity. 2-stroke engine with a capacity of 2.5 liters. with. consumes fuel in the form of AI-92 gasoline and Patriot G-Motion oil in a ratio of 32: 1. The shaft diameter is standard 20 mm, the maximum diameter of the screw used is 250 mm. Engine displacement - 43 cubic meters. cm, the volume of the fuel tank is 1.2 liters.

A protective anti-vibration system is built in, it is possible to activate the quick start function, due to which the required number of revolutions is gained in less time. There is a fuel pre-booster pump, so there is no need to worry about starting a cold engine.

The Patriot PT AE 70D is a powerful and practical drill suitable for medium to heavy work. Available 2-stroke 3.5 HP engine. with. allows you to make holes in soil, clay and other dense surfaces. As for the speed at peak loads, it is 8000 rpm. The 1.3-liter fuel tank makes it possible to use the tool for a long time.

The engine displacement is 70 cubic meters. cm, the maximum auger used reaches 350 mm to create wider and deeper holes, which is more often used in professional construction.

Patriot PT AE 75D is a unit that is an improved (in terms of design) version of the previous motor-drill. The main changes have affected the design, namely: the shape of the handles has changed, their location has changed. There is not much difference in price and technical characteristics. Also installed is a 3.5 liter 2-stroke engine. s, the indicators of the speed, the maximum diameter of the screw, the volume of the engine and the fuel tank are similar.

To work on this gas drill, two operators are required, there is a quick start function, the unit is equipped with an anti-vibration system. The engine was modified for longer use in one working session. The fuel is used in the same ratio, because it is the same for all models.

Patriot PT AE 65D is a similar motor-drill, which differs from the previously presented models in a lower price and a reduced engine volume from 70 to 60 cubic meters. cm. There is a choice of the number of operators, since this device can be operated by one person.

Considering that all models of Patriot gas drills have approximately the same cost, the most important criteria are technical characteristics, as well as the design itself with different handle positions.In this case, it all depends on individual preferences. Each unit is in some way similar to others, so there is no particular difficulty in choosing. If you need a tool to do a lot of work, the Patriot PT AE 70D with 350mm auger is the best choice. For a simpler application, the Patriot PT AE 140D is enough.

To operate Patriot gas drills correctly, follow safety precautions, such as:

• choose sturdy, tight-fitting clothing;
• watch the position of your legs, as they can be in the area of ​​\ u200b \ u200bthe sharp knives;
• keep equipment out of the reach of children, and this room must also be kept clean (there should not be a lot of dust / moisture);
• do not forget to make timely fuel changes in the correct ratio;
• do not place your equipment near high heat sources.