All about Elitech motor-drills

The Elitech Motor Drill is a portable drilling rig that can be used both in the home and in the construction industry. The equipment is used for the installation of fences, poles and other stationary structures, as well as for geodetic surveys.

The purpose of the Elitech Power Drill is to create boreholes in hard, soft and frozen ground. In winter, portable equipment is actively used for drilling in ice. The motor-drill is supplied by the manufacturer in two colors: black and red. The drilling rig is equipped with a two-stroke gasoline engine. Turn off the engine before refueling Elitech powered drills. When refueling, slowly open the fuel tank to relieve excess pressure. After refueling, carefully tighten the fuel filler cap. The device must be located at least 3 meters from the refueling area before starting it up.

Mix fuel and oil in a clean measuring container. Stir (shake) the fuel mixture thoroughly before filling the fuel tank. At first, only half the amount of fuel used needs to be filled. Then add the remaining fuel.

Distinctive features of the Elitech motor-drill include:

• light weight (up to 9.4 kg);
• small dimensions (335x290x490 mm) facilitate the transportation of the unit;
• The special handle design makes it easy to operate the machine, which can be handled by one or two operators.

A wide range of Elitech motor-drills and a large number of modifications allow you to choose the optimal model for any type of construction work. The Elitech BM 52EN motor-drill is a relatively inexpensive installation that suits many users and is equipped with a 2.5-liter two-stroke two-cylinder engine.

This device is designed for drilling in soil and ice. This allows you to perform such operations as efficiently as possible and in a relatively short time. Most often, this gasoline unit works in cases when you need to install poles, fences, plant trees, create small wells for various purposes. The number of revolutions of the engine per minute for this model is 8500. The screw diameter is from 40 to 200 mm. The Elitech BM 52EN gas drill has many advantages that are extremely important for users:

• comfortable handles with optimal position;
• joint work of two operators is possible;
• relatively low noise level;
• well thought out ergonomic design.

Motor-drill Elitech BM 52V - a reliable device designed for a fairly long service life. It is designed for work on the creation of holes in normal and frozen ground. If required, this block can also be used for ice drilling. The proposed technique allows you to solve problems quickly and conveniently. The engine displacement is 52 cubic meters. cm.

This gas drill has an impressive number of significant advantages:

• handle that provides a secure grip when solving problems;
• container provided;
• adjustable carburetor;
• it is possible to use the equipment by two operators.

Motor-drill Elitech BM 70V - a fairly powerful productive unit, which, in terms of its basic characteristics, is well suited for many people using equipment of this type. Standard drilling operations are performed using an Elitech BM 70B gas drill.It can handle both hard and soft ground as well as ice. It is equipped with a 3.3-liter two-stroke single-cylinder petrol engine.

The device has many strengths that affect performance in one way or another:

• improved handle design for comfortable work and a firm grip;
• adjustable carburetor;
• the controls of the unit are optimally located for the operator;
• reinforced construction.

Motobur Elitech BM 70N Is a reliable and powerful device with excellent performance and popularity. The Elitech BM 70N gas drill is designed to work not only with soil, but also with ice, which allows you to operate equipment in a variety of situations. The device is impressive in efficiency, it is equipped with a two-stroke single-cylinder petrol engine, the power of which is 3.3 liters.

The proposed technology has many significant advantages:

• comfortable handles for one or two operators;
• the frame of this device is characterized by increased strength;
• adjustable carburetor;
• drilling machine controls are located optimally for the user.

Before starting the motor-drill, you must carefully read the instructions attached to this model. Install all removable parts that were removed from the unit during transport. Only then proceed to launch.

• Turn the ignition key to the "On" position.
• Press the graduated canister several times so that the fuel flows through the cylinder.
• Pull the starter quickly, keeping the lever firmly in hand and preventing it from bouncing back.
• If you feel the engine start, return the choke lever to the “Run” position. Then pull the starter again quickly.

If the engine does not start, repeat the operation 2-3 times. After starting the engine, let it run for 1 minute to warm it up. Then fully depress the throttle trigger and start working.

To drill one hole, you must:

• grasp the handle firmly with both hands so that the device does not upset your balance;
• position the auger where it is necessary to drill and activate it by pressing the gas trigger (thanks to the built-in centrifugal clutch, this work does not require much effort);
• drill with periodically pulling the auger out of the ground (the auger must be pulled out of the ground as it rotates).