All about the timber 200x200x6000

In the construction of various structures and decoration of premises, a wooden beam is used. This material is considered quite common; in stores you can find a variety of models of timber of different sizes. Today we will talk about the features of these parts with dimensions of 200x200x6000 mm.

A beam of 200x200x6000 mm is considered a relatively large building material.

Such massive structures can also be suitable for the formation of walls and strong partitions, ceilings in multi-storey residential buildings. They can be of many different types. These materials can also be made from all kinds of trees, but coniferous bases are mainly used.

Depending on the materials from which the timber 200x200x6000 is made, several categories can be distinguished.

• Pine models. It is this breed that is most often used when creating a bar. Pine is notable for its low cost. Such treated wood has good strength and stability. The pine structure comes in a variety of bright colors. These wooden surfaces can be easily processed using the appropriate equipment. Such wood dries quickly, which can significantly speed up the manufacturing technology.
• Spruce products. This coniferous wood has a relatively soft texture and a pleasant appearance. Spruce is a resinous species that protects the wood surface from negative external influences. These needles have a low cost, so a timber made from it will be affordable for any buyer.
• Larch timber. This species boasts the highest level of hardness compared to other types of wood. Significant defects can rarely be found on larch blanks. Such a tree has a rather high cost. It is characterized by uneven density, low water absorption rates.
• Oak timber. This material is as strong, resistant and durable as possible, it can easily withstand even heavy loads. Oak is easy to dry, over time it will not crack and deform.
• Birch models. Birch options can withstand significant loads, as well as excessive moisture and mechanical damage. Birch lends itself well to drying and processing. But it should be remembered that the level of strength is much lower compared to other types of wood.
• Fir products. These models are distinguished by their beautiful appearance, they have an unusual natural structure. But at the same time, fir cannot boast of good durability. Sometimes glued beams are made from it.

And also distinguish between edged and planed timber. Thermal insulation performance and level of air permeability for these two varieties are the same.

Edged wooden beams are used to create various building structures, including reliable residential structures. Sometimes it is used in the formation of roofing, for the manufacture of durable containers.

Sliced ​​wooden beams are produced with an absolutely smooth and thoroughly dried and sanded surface. Compared to the previous model, it has a more aesthetic appearance, so this wood is mainly used for interior decoration.

And also it is worth highlighting the glued type of timber. Such materials are obtained by preliminary thorough drying, processing and deep impregnation of blanks with special adhesives.

The glued type of timber boasts increased strength and durability. There can be no through cracks on their surface. But it is worth remembering that the cost of such wood structures will be much higher compared to the usual one.

Cubic capacity will depend on the size of the items. The volume of timber in one cubic meter with such wooden building materials is 0.24 cubic meters, only four pieces in 1 m3.

What is the mass of a timber with dimensions of 200x200x6000 mm? If you are going to calculate the weight of such a bar yourself, it is better to use a special calculation formula, where the number of pieces in 1 m3 will be a prerequisite. For a bar with dimensions of 200x200x6000, this formula will look like 1: 0.2: 0.2: 6 = 4.1 pcs. in 1 cube.

One cubic meter of timber of this size will weigh on average 820-860 kilograms (for edged and processed dried material). Thus, in order to calculate the mass of one such timber structure, one should simply divide this total weight by the number of pieces in 1 m3. As a result, if we take the value of 860 kilograms, then it turns out that the mass of one piece is almost 210 kg.

A bar with dimensions of 200x200x6000 mm is widely used in construction and finishing processes. It will be an excellent option not only for creating various structures, including residential ones. Such wooden parts can also be used to form floors.

Glued dry timber is most often used in the construction of wall coverings. Walls made of such wood will have excellent thermal insulation properties. In addition, during their installation, there will be practically no shrinkage, therefore there will be no need for periodic repairs.