How to make a shower from a Eurocube?

Eurocubes, or IBCs, are mainly used for storing and transporting liquids. Whether it is water or some kind of industrial substances, there is not much difference, because the Eurocube is made of a heavy-duty material, which is characterized by high wear resistance, quality and sufficient reliability to travel long distances. These characteristics allow people to use containers for personal purposes. One of the methods of application is to create a shower cabin from it for a summer residence.

It is quite simple and cheap to build a shower cubicle from a cubic capacity. There are many different projects of such structures, but the most profitable, versatile and convenient is the cabin, which also has a rainwater collection tank.

The average sizes of the Eurocube are:

• length 1.2 m;

• width 1 m;

• height 1.16 m.

Such a Eurocube is designed for 1000 liters, and its weight will reach 50 kg, so you need to be very responsible in designing the foundation for the shower. If it is not possible to place it on cement, then a frame made of metal trim should be used.

It is possible to sheathe the shower with the help of corrugated board, lining, boards, polycarbonate or even brick, overlaid with a wall. And also a simple color film is suitable if this structure needs to be used for a small amount of time.

The dimensions of the shower cubicle (the width and length of which are usually 1 m, and the height - 2 m) should be calculated based on the dimensions of the cube.

Heating the liquid can be natural - with the help of the sun, but this process is quite protracted. Therefore, in order to save time, you can spend resources and use heating elements or wood-fired boilers.

The supply of water to the container can be carried out using mechanical or electrical methods. The most non-volatile method is using a foot pedal pump. An electric method will be more perfect, which can allow pumping water from a source, well or lake, located nearby a summer cottage.

The first step in erecting a shower from a Eurocube is choosing a location. At the dacha, as a rule, most of the territory is allocated for beds and planting. If people will not use various gels and soaps when bathing, such water can be used for irrigation. This means that the shower can be placed next to the vegetable garden.

A drain pit is a necessity for this type of shower, if the sewerage system is not connected to the site. In order for 1 person to take a shower, you need 40 liters of water. This amount of liquid can have a very negative effect on the soil, gradually eroding it, bringing in soap and other substances, so you need to take care of the waste disposal site in advance.

The frame is erected mainly from metal pipes: its height must be more than 2 meters, otherwise the use of such a shower cabin will become inconvenient for the owners.

The stand for it can be built of brick so that it does not sag under the weight of the eurocube, in which there will be a lot of water. but it must be equipped taking into account the outlet of the sewage system or the drain pipe that leads into the pit.

After the foundation is ready, the frame can be sheathed with a profiled sheet.A slatted floor would be a good option, the drain must be installed before the interior decoration of the room is completed.

The hose to the shower room is led from a eurocube, which is installed on top of the building. A shower can be purchased at any hardware store. If 2 water tanks will be used, so that both hot and cold water are supplied to the cabin at the same time, it is also worth buying a mixer.

It is necessary to embed a fitting into the tank, which will serve as a fastener for the branch pipe. Next, the valve is mounted, and only after that - the shower head.

In the summer, the plastic will not lose its strength even under the scorching sun, but in the winter, it can crack due to the cold. Therefore, before using the cabin, it is worth making a thick layer of insulation on its surface, covered with a film, so that it does not swell due to the liquid.

If natural water heating is used, the tank should be painted with black paint: this color attracts the sun's rays, so in the summer this will increase the efficiency of the structure.

The presence of a water supply system can greatly simplify the solution of the problem of arranging a shower, because you can build a bathroom in the same room with it.

When installing a collapsible booth, you should use a small pump for water supply - a mini-shower, which, when electricity is supplied, immediately leads water to the watering can from the reservoir. It is completely energy-intensive: if there is no free 220 V socket nearby, you can connect it to the car's on-board network - to the cigarette lighter.

For information on how to make a shower and watering from a Eurocube with your own hands, see the next video.