Everything you need to know about concrete mixers

In this article, you will learn everything there is to know about concrete mixers and how to choose a manual concrete mixer. A rating of the best concrete mixers for home and summer cottages of forced and gravitational action is presented. Described reviews, information on size and weight, on the use of specific devices.

It should be said right away that this is one of the outstanding Armenian inventions. It would be hard to imagine without such a development Stepan Stepanyan. It was thanks to him that a barrel with a drum mechanism inside began to be put on trucks. Such an invention makes it possible to move building mixtures a significant distance without loss of quality or with minimal loss of it.

Manual and mechanized concrete mixers actually differ little from each other. Typical components:

• bed;
• parts responsible for mixing;
• unloading mechanism;
• transmission unit;
• drive (motor - on electricity, sometimes on gasoline or diesel fuel).

For the construction of the bed, a profile or pipes are used. In the case of small units, the bed is mounted on wheels to facilitate movement. For mixing concrete, use screws, blades and some other details. The electric motor can be powered both from the mains network and from portable, mobile power plants.

It should be noted that some models use a manual drive instead of a complex motor. Yes, they are harder to get started and use. It is not enough to press the button. We'll have to make a very serious effort. However, you can work even where there is no stable power supply. It is important to take into account not only the features of the engine, but also the nuances of the mechanism that transfers the forces to the working parts. For this purpose, a gearbox is installed in many products.

Since this unit is located under the drum, it is well protected from the ingress of foreign particles. Since the capacity of the tank varies greatly, you can choose models for both domestic and industrial use. Given the limited number of transmission links, power and current consumption will be perfectly balanced. If the device is connected to a conventional 220 V power supply, then it can only be connected through a capacitor.

Concrete mixers can be either gravitational or forced. Let's consider each type separately.

Such a concrete mixer works either in a continuous format or cyclically. Both types of models can be found on the market. Since the device is relatively small, it can be placed almost everywhere. The drum is an integral part of the gravity mixer. Different drum models either tip over or do not change their position.

And also there are inclined drum nodes with a wide neck connection of cone-shaped blocks. The main properties of the gravity stirrer:

• ease of movement;
• comparative compactness;
• reliability with proper installation;
• there is no need for special knowledge on the part of the staff;
• low degree of energy congestion;
• lack of versatility;
• the probability of erroneous distribution of additives in the processed mass.

Among the types of mixing equipment, this particular one is widely used on a wide variety of construction sites. With its help, kneading is done quickly, moreover, very high quality. The compulsory method guarantees the preparation of concrete of any existing brands. And also its use is allowed:

• to obtain building compounds with excellent refractory properties;
• for mixing glue and simple mortars;
• for the purpose of connecting components that improve the quality of concrete;
• even for obtaining various combinations of substances used in metallurgical and chemical industries, in castings;
• for work with both the most liquid and very dense concrete.

For home use and work on small construction sites, the best option is a concrete mixer on wheels. She is able to call in any desired place without any problems. The mobility of construction works is fully ensured. At the same time, their speed increases. Along with the gear drives already mentioned above, girth models are also used. They:

• comfortable for a variety of jobs;
• allow more convenient unloading of the prepared mixture;
• are characterized by increased maintainability (broken or worn out units change without any problems);
• very durable;
• relatively compact;
• equipped with excellent wheels and reinforced frames;
• can have a plastic (cheaper) or metal (more durable) crown.

Of course, along with the usual household one, there is also an industrial concrete mixing plant, which has excellent characteristics. Such models can produce a very large amount of mixture, performing work even in the interests of large construction companies. Similar devices are used to build:

• bridges;
• tunnels;
• dams;
• dams;
• apartment buildings;
• factory buildings;
• public and socio-cultural facilities;
• office buildings;
• exhibition and shopping centers.

In factories where concrete is produced, a stationary type of mixer is often used. These are the most powerful devices, they are able to prepare several tons of the mixture literally in an hour. But even if this level is not reached, we are still talking about hundreds of kilograms of product. A bucket is often used on conventional construction sites. With its help, fertilizers and combined feeds are also sometimes mixed.

Builders use a bucket mixer in conjunction with miniature loaders. This allows you to work confidently even where it is impossible for large-sized special equipment to pass. For the manufacture of components, in any case, materials with maximum wear resistance are used.

6 blades are placed on 1 shaft, 10 blades on 2 shafts. In the second version, the rotation of the working parts is in the opposite direction. As a result, the mixture is tossed up and cut. The movement along a closed circular path allows to achieve a turbulent effect, due to which the quality of the resulting product increases. A vertically located shaft is typical for rotary (they are also disc-shaped or pot-shaped) mixers.

However, this type of equipment is now morally obsolete, and even the most backward enterprises curtailed its production for a long time. It is impossible to obtain high quality concrete with such devices. It takes quite a long time to stir, and even at this price it will not provide decent performance.

A newer type of vertical structure concrete mixer is the planetary countercurrent format. In it, the stirring stars revolve around the vertical axis. The concrete slurry moves relatively little, but at the same time it is mixed very intensively. As a result, it turns out to achieve high homogeneity of the mixture and its excellent quality. However, such a drive is very complicated technically, it is difficult to set up and repair it. Therefore, planetary countercurrent concrete mixers are being introduced into practice very slowly.

The dimensions of a typical concrete mixer can be as follows (in centimeters):

• in length from 50 to 120;
• in height from 40 to 100;
• in width 80-140;
• over the cross section of the tank 40-70;
• over the section of the loading channel 24-60;
• wheel diameter 28-40.

The mass of such devices ranges from 85 to 170 kg. The dimensions are directly affected by the volume of the device; it is always necessary to remember that the capacity of the concrete mixer is greater than the amount of the prepared mortar. So, for the construction of a gazebo, garage or shed, for other ancillary work, models of no more than 100 liters are usually used.

For private use, the largest model is 500 liters; larger modifications simply do not have good uses.

When choosing a concrete mixer for a summer cottage or a construction site, you must first of all pay attention to the basic material. A crown or other working body made of steel:

• serves for a long time;
• does not make a lot of noise;
• allows you to work for a long time, and in a daily mode.

Cast iron is mechanically strong and inexpensive. However, it is very fragile and can only be used intermittently. For a private home, however, this is not such a bad choice. Plastic working bodies are cheap, they work quietly, but they are fragile. They are only justified for small private jobs. Polyamide gears are very resistant to wear and tear and should be used on a daily basis.

The choice of household and industrial mixers for gear-type construction should be based on a different principle.

Focused on:

• unit power - for long shifts, it is better to take models not weaker than 0.5 kW;
• performance level - large work can only be carried out with concrete mixers that produce at least 30 revolutions per minute and with a capacity of at least 200 liters;
• drum wall thickness - for domestic use about 2 mm;
• operating voltage - 220 volts are enough for the house.

The Russian market is almost 100% saturated with Chinese models, including those sold under domestic brands. It is very useful to be interested not only in performance, but also in the reliability and service life of a particular model. It is also important to consider the maintainability of the concrete mixer.

The Profmash B-180 model is among the best concrete mixers for the home. The Russian-made device is made according to the crown system. In a tank for 1 run, 115 liters of concrete solution are kneaded. The device itself weighs only 57 kg. Wheels are provided for transportation, in addition, it can be powered from a daily 220 V network.

They say in favor of the device:

• high efficiency;
• asynchronous low-noise electric motor;
• toothed belt transmission;
• polyamide crown of 4 sections, replaceable separately;
• bell mounted in 7 positions.

The gear wheel will not slip from a powerful load. The toothed belt section is enlarged. The blades are removed. However, the belt may stretch over time. In addition, the network cable is relatively short.

In terms of reliability and versatility, "Vector BRS-130" stands out favorably. The model is positioned as suitable for building and finishing mixtures. The working tank is made from a pair of bowls obtained by a one-piece tension. The motor has a power of 0.75 kW. The technique is set in motion by a toothed block connecting a gear made of steel and a crown made of a wear-resistant metal composite.

Inside the bell, up to 110 liters of concrete are kneaded in one run. The compactness of the device made it possible to lighten it up to 54 kg. The sound volume is relatively low. The blades, like the previous version, are removable. The engine is protected from shocks, but the prevention of overheating is frankly poorly established.

The "Vortex BM-180" also falls into the top of the concrete mixers. This high-performance machine is equipped with a cast iron crown. The compact unit is resistant to wear and tear. The prepared mixture is prepared quickly.

From imported concrete mixing plants, attention is drawn to itself Most Pro CM 160P... The budget model is equipped with a plastic crown. The motor develops an effort of 0.6 kW. Therefore, mixing hard concrete mixes is not a problem. Yes, you can make no more than 80 liters of such a composition at a time, but it will be cooked in a maximum of 2 minutes.

Important parameters:

• convenient transport wheels;
• increased rigidity of the stable frame;
• weight 55 kg;
• affordable price;
• simple construction;
• relatively little noise;
• difficulty in cleaning the blades;
• not long enough power cord.

Praised for the lightness and stability of the steel crown RedVerg RD-CM63... The weight is 63 kg. The motor power is only 220 W. The torsional moment is transmitted by means of the working gear. The solution is obtained only in a small amount, while the device is very noisy.

The Forte EW7150 stands out from the gearboxes. The unit is suitable for pouring the foundations of buildings. The trolley frame has large rubber wheels. The device is assembled as carefully as possible.

The Lebedyan SBR-132n / 220 is very popular. This is a domestic device equipped with a Chinese 550-watt motor. The drum allows you to prepare 64 liters of concrete in 1 run. The blades are V-shaped. The frame is designed to rotate 360 ​​degrees.

Important parameters:

• protection of the gearbox from mechanical influences with a plastic casing;
• possibility of power supply from the generator;
• one-piece working tank;
• relatively low rate of tank rotation (no more than 1 revolution in 3 seconds);
• long service life.

With a forced motor supply solution mixer "Misom SO 351-300"... The machine takes up a lot of space, but can make large quantities of concrete. This task is accomplished with a 2.2 kW motor. In 90-120 seconds, up to 250 liters of the mixture is produced. The auger makes 35 revolutions per minute; the device is supplied with a current of 380 V; the mixture can be discharged due to the tipping drive.

When choosing a powerful station for mixing a solution, you should pay attention to Caiman Spin15A... The French bunker model can prepare not only masonry, but also plaster, and even self-leveling mixtures. The motor generates a cranking force of 1.4 kW. It is broadcast through a direct gearbox. The structure, if necessary, is disassembled, which makes it easier to maintain it.

Important characteristics:

• weight 78 kg;
• auger with steel blades;
• complete with pump and hose;
• sale only by order;
• productivity is a maximum of 18 liters per minute.

Of course, good concrete can only be made from high-quality components. And among them the parameters of cement are the most critical. Sand is best taken in fractions from 1.5 to 5 mm. The ratio of the components is determined by the desired characteristics of the mixture. In order for sand and cement to adhere less to the blades and walls, they are moistened in advance before the first batch.

More recommendations:

• avoid unloading the solution with a shovel;
• wash the drum as soon as possible;
• de-energize the device after finishing work and flushing;
• place the mixer only in a convenient place, on a flat area;
• start with sand, continue with cement and crushed stone, pour water last in small doses (only in that order);
• avoid excessively long stirring, which overdries the mixture.

Often builders, in order to clean the concrete mixer from the frozen solution, tap it on the outside. But this leads to the appearance of dents, where the solution will stick even more. The chipped paint opens the gate for corrosion. Moreover, the thrust bearing will gradually deteriorate. There is only one solution to the problem: before starting work, use a hydrophobic compound with an anti-corrosion effect - an automobile anti-corrosion agent is ideal.

Gears should not be lubricated. A number of manufacturer's instructions expressly prohibit this. The lubricated part picks up a lot of debris and even stones. The use of wooden deck or steel sheets helps to ensure sufficient evenness of the support.

It is useful to pay attention to the ratings from the owners. Since the models already mentioned above are well characterized, it is worth analyzing opinions about other versions. "Vortex BM-200 74/1/5" is appreciated for its engine power and high quality materials. That being said, the comments also mention:

• significant tank volume;
• optimal width of the receiving opening;
• the tendency of the corkscrew spring to stretch gradually.

Zitrek Z200 024-0984 is generally considered by consumers to be a good choice. The model works great at home under light load. However, the legs of the support may become loose. The motor is not overheating.

Stroymash SBR-500A. 1":

• durable and reliable;
• equipped with a wear-resistant crown;
• suitable for professional teams;
• prepares a lot of solution;
• has only one drawback - the price.

Wester BTM120A - concrete mixer for country use, which has no negative reviews. But they note:

• the ability to move alone;
• passing through standard doors;
• excellent assembly;
• service life of 10 years even with active use;
• comfortable price;
• comparative compactness.

The device is recommended for moving Parma B-130R-Maxim. Users approve of:

• powerful single-phase motor;
• heavy crown;
• build quality;
• the ability to work in an intensive mode;
• life time;
• the ratio of power and reliability (and only the price is a little upsetting).