M200 concrete

M200 concrete is the most popular in the construction industry. It has qualities such as strength and reliability. It can be used for the construction of private houses, pouring foundations, it is perfect for sidewalks and playgrounds.

• Components - M500 cement, sand, water and crushed stone;
• Proportions: 1 kg of cement accounts for 1.9 kg. sand and 3.7 kg of crushed stone;
• Bulk composition for 1 liter. cement: 1.7 l. sand and 3.2 liters. rubble;
• Class - B15;
• In general, from 1 p. cement comes out 4.1 liters. concrete;
• The density of the concrete mixture is 2385 kg / m3;
• Frost resistance - 200 F;
• Water resistance - 6 W;
• Workability - P3;
• Weight of 1 m3 - about 2.4 tons.

M200 concrete is:

• fine-grained - used for foundations or paving
• heavy - due to low shrinkage, they are used to protect iron reinforcement from corrosion and other harmful effects.

• Due to the low density, high reliability is ensured.
• It has low thermal conductivity, which means that you do not need to spend a lot on heat-insulating material.
• When dry, it immediately gains strength.
• Very comfortable.
• No cracks when using.

Thanks to these qualities, the mixture meets the requirements of the modern building materials market. Such concrete can be poured in the temperature range of 5-350 degrees, and it will not lose its positive qualities, and also has an excellent adhesion effect.

М200 (В15) can be used in areas with strong temperature fluctuations and where there is a need for construction in a short time.

M200 concrete is used in the following cases:

• When building the foundation of a house, concrete screeds or paths. The result is a durable, crack-free coating with a long service life.
• It is used to create retaining walls and stairs.
• Protects reinforced concrete structures from corrosion and negative media.
• It is used to make curb stones and concrete cushions.
• It is used in various reinforcement works. It can be used to build buildings with a small number of floors, load-bearing walls or make ceilings.
• Due to the stability of compression, it becomes possible to make paving slabs and building blocks out of it.
• When building driveways for any road transport and home outbuildings (baths, garages or gazebos).

This concrete grade, depending on the aggregate, is used:

• for residential buildings or industrial premises;
• for finishing works;
• for works in the field of road construction.

It is the composition of the concrete mix that provides reliability and hardness. M200 concrete is protected from deformation, hardens quickly, and is resistant to chips and cracks.