M100 concrete

M100 concrete is a type of lightweight concrete that is mainly used for concrete preparation. It is used primarily before pouring monolithic slabs or building foundations, as well as in road construction.

Today, it is concrete that is considered the most common material in construction. And it doesn't matter whether we are talking about building a skyscraper or building a foundation for a small country house - it will be necessary.

But in different cases, different concrete will be needed. It is customary to divide it into classes and brands. They all differ in their characteristics and are used for different purposes. For something, a low level of strength will be enough, but for another structure, the strength must necessarily be increased.

M100 is one of the many brands. In many ways, the brand will depend on the ratio of the components that are used during manufacture. And all because the change in this ratio will change the quality characteristics. However, the cost of different brands is also different. M100 is considered one of the simplest. Due to this, the price for it will not be very high. At the same time, the scope of application of this material is also quite limited. So do not assume that you can get everything at once for a small cost.

• It is used when installing a curbstone, since there is no need to ensure the strength of the underlying layer. Due to the fact that this surface is used exclusively by pedestrians, the pressure on it is not very great.
• It can also be used as an underlayment for low-traffic roads.
• To carry out preparatory work to create the foundation for the foundation. It is often used in this area because of its low price.

But for other areas of construction, this brand is not very suitable, since it really can not withstand high loads. This is its only drawback, which does not allow using this material too often.

This mixture is often referred to as "skinny". And it’s not unreasonable. This is due to the fact that the amount of cement in the mixture is minimal. It is sufficient only to bind the aggregate particles. Also, the mixture includes crushed stone. It can be gravel, granite, limestone.

If we talk about the ratio of the components of the mixture, it can be noted that it will most often be something like this: 1 / 4.6 / 7, in accordance with cement / sand / crushed stone. Due to the fact that low requirements are put forward for the concrete itself, the quality of the components does not have to be very high. In the manufacture of practically no additives are used.

M100 concrete itself is not highly frost-resistant. It can withstand no more than fifty freeze-thaw cycles. Water resistance is also not very high - W2.