How to make a trampoline with your own hands?

The dacha is considered an excellent area for family recreation, where adults can relax from working days, and children can throw out their energy as much as possible in the clean air. To protect the games of little fidgets, other parents place trampolines in suburban areas. These simulators can either be purchased ready-made or made by hand from improvised means.

The children's trampoline is a jumping device. Classes on it have a positive effect on the entire body. Babies not only get a lot of pleasure and pleasant emotions, but also develop the vestibular apparatus, motor skills and the musculoskeletal system. Despite the fact that recently you can find many models of trampolines on sale, it is quite possible to build them yourself. You can assemble a trampoline with your own hands from various materials, but in order for the jumps to become safe, a protective mesh must be present in their design.

When making a trampoline at home, it is important to pay attention to the strength of the frame and the installation of the springs. The main feature of homemade trampolines is that in them one of the sides is attached to the frame with springs, which require a special placement scheme. First, you need to perform the primary hook, attaching springs to every third hinge. It is necessary to observe a step in two loops so that the elements do not deform, but evenly stretch.

For the strength of the trampoline, it is recommended to make a secondary hook, in which the springs must be hooked into each loop. In this case, the canvas will not sag from the edges of the frame.

For a homemade trainer, it is best to choose long springs. In addition, it is important to pay attention to the choice of material for the frame - it must be durable. Before making a children's trampoline, you should also decide on its dimensions, having drawn up a drawing in advance.

A summer cottage trampoline can be made from ready-made parts that are sold in a wide range. If it is not possible to purchase them, then suitable tools at hand can be used for assembly. For example, the frame is made of a metal hoop, in which the required number of holes is made with a drill. You will also need a wooden block - it will have to be cut into 8 identical pieces, no more than 30 cm long. Holes are made in wooden parts, the diameter of which should be several millimeters larger than those in the hoop.

To create a mat, you need to choose a durable material. A tarp works well. A cover is sewn from it, the size corresponding to the circle of the trampoline.

And also a children's trampoline can be made from a camera. There are many options for creating a home simulator, the only thing is that the material from which it is planned to be assembled must be reliable and of high quality in operation.

Making a trampoline for your little one is not difficult if you show diligence and a little imagination. Of course, you can't create a gorgeous shell at home, but a modest homemade simulator will serve as an excellent place for a little fidget to play. Before starting the work process, it is important to decide whether the trampoline will be spring or inflatable with a net.

The first type is made from a metal support and a mat attached to the frame with springs. It is equipped with a protective mesh for safety. The second one is difficult to assemble at home, so it is better to refuse the idea of ​​making it.

In the event that its assembly of a children's trampoline is performed for the first time, the following instruction will help the novice craftsmen.

1. First, you need to prepare the material for the manufacture of the simulator. It is best to purchase ready-made parts. If you plan to make a trampoline from scrap materials, then you will need a metal circle, beams, dense fabric, springs and a net.
2. The first step is to connect the legs of the structure. For this, a frame from a circle is preliminarily prepared. Its ends are carefully secured. Then the frame is turned over and placed on a flat surface so that the holes for the legs are at the top. You need to insert W-shaped inserts into them, performing smooth pressure.
3. Then the frame is turned over and placed on its legs. The next step will be to make a mat, the cover of which should be sewn from a tarpaulin in advance. A cover is put on a circle cut from a dense material, and then fixed inside the trampoline with the help of special hooks. This should be done carefully and slowly. In order for the mat to be evenly distributed, it should be visually represented in the form of a clock and fastened first in those places that correspond to 12, 3, 6 and 9 o'clock on the dial. Then the springs are fixed diagonally.
4. The work is completed by fixing the pillow. It is placed on top of the trampoline, then the ropes are taken and passed through the springs, securely fixing the playing place. In addition, it is recommended to additionally glue the upper part of the legs with soft foam rubber, and the lower one with rubber. Thanks to this, the trampoline will be durable and will not slip.

The above design is simple and it is quite possible to assemble it with your own hands. This product is practically in no way inferior to the factory one. If the trampoline is going for kids, then it must be additionally covered with a net or put it under the mat. This will protect the play of a small child. Such a simulator is perfect for children under the age of 12, while teenagers should assemble more powerful structures.

Some craftsmen make summer trampolines from car tires. Holes are drilled on them closer to the protector with a drill, observing a step of 2 cm. Then, the open middle part of the tire is “darned” with strong rubber or a thick cord. As a result, a tight stretched mesh is obtained, it will perfectly support the tarpaulin and protect the child from injury. In this design, you can do without legs, since the tire has sufficient height.

For information on how to make a trampoline with your own hands, see the next video.