How to make a do-it-yourself sauna stove?

Most of the owners of suburban areas, along with the construction of a house, the improvement of the adjacent territory, are also planning the construction of a bath. It is more convenient for someone to use the services of professional craftsmen, but for someone, a bathhouse built with their own hands has a special indescribable value.

The main element of the bath is the stove. Despite the large number of important details, it is quite possible to design it yourself if you study all the subtleties and nuances of the furnace business.

With all the similarity of the functionality of the ovens, the requirements for different models will differ. The sauna stove must have a high efficiency. Since it should take up little space, while having enough power to heat the steam room to significantly high temperatures, it must heat up quickly and hold the heat for a long time.

The design of the stove is not so complicated, but there are a number of significant conditions. A very important parameter is the safety of the oven.... For example, a so-called hot stove raises the temperature of a bath room in a short time due to the fact that its walls are warmed up to a temperature of up to 100 degrees Celsius.

If you carelessly touch this hot surface, a burn is inevitable. In addition, in this case, it is impossible to control the degree of heating, which is fraught with great stress for the body and even heatstroke. Unlike conventional stoves for heating a room, sauna stoves have additional elements, such as a heater or a water tank.

The stove is a container in which cobblestones of different sizes are stacked. Heated to high temperatures, they help to retain heat in the bath room, and are also direct steam generators. The stones are poured over with water, the evaporating water creates the necessary humidity and a comfortable atmosphere in the steam room.

The water tank can be equipped with a tap for more convenience. In the absence of a central or other water supply in the bath, a container with hot water becomes a necessity for taking bath procedures.

There are a large number of models of stoves that you can make yourself. They differ in different characteristics. In general, conditionally bath stoves are divided into two types - cold and hot. A hot oven, as noted above, heats up completely, including its own walls, from here the heat spreads to the entire room of the steam room. And if such a stove has a minus in the fact that the room will overheat, then a cold stove will not have such a problem due to heating only the firebox itself and the stones in the stove... But in this case, an additional source of heat is needed, especially in winter.

There is a high probability that such a centralized heater will not cope with the large volume of air in the bath.

The next characteristic is the constancy of heating. There is continuous heating ovens, they are heated during bathing procedures for an unlimited time. It is not necessary to heat it to very high temperatures; it is enough to constantly maintain a given level by throwing firewood. With constant heating, the heat and humidity are stable, the room is comfortable.

Intermittent heating furnace well heated before visiting the bath.After that, the sauna will keep the obtained temperature for a long time due to the stones that are inside the heater. An interesting additional effect from such a stove is the smell, very pleasant with hints of wood, which arises from the settling of wood soot on the stones.

To make the right choice, you need to figure out how different ovens are also characterized.

The first model to look out for is brick oven... Experienced builders recommend this particular material as the most optimal for a bath. The biggest advantage is the quality of the steam that comes from the heat of this oven. The heat generated by it is soft and even, so the steam turns out to be dense, hot, but not scalding.

Another nice nuance for those with aesthetic taste - you can create an unusual or classic interior solution from bricks, so the sauna stove will be not only useful, but also pleasing to the eye construction.

At the same time, it should be noted that brick oven requires free space... There are, of course, small-sized designs, but still more often the dimensions of such a furnace are quite large. In addition, to install it, you will need an additional foundation, since the stove is heavy, which can also affect the free area of ​​the bath.

Brick ovens, in turn, also come in several types. Depending on the features of the construction, the stove will be called “white”, “gray”, “black”.

Bath "in black" has been known in Russia for a long time. Once it was the only option for arranging a bath and it was believed that visiting it brings health, kills ailments and strengthens the body.

The bottom line is as follows: in the bathhouse, a stove is being built from stones and rubble. Such a stove does not have a separate chimney. Due to the simplicity of their design, they managed to design such stoves even in a marching military life, organizing baths for soldiers. That is, the stove is melted, firewood is constantly thrown up in order to achieve strong combustion, smoke from burning firewood goes directly into the room.

It takes several hours to thoroughly warm up the oven and the room. After that, the bath room is ventilated and the heating is stopped. Of course, the bath will not be able to keep warm for a long time after the fuel burns out, but, as a rule, this was enough for washing.

After such heating procedures, everything in the bathhouse was covered with a layer of soot, shelves, walls, all possible surfaces. The soot was washed off with water, and then the stones were poured with broths of mint and pine needles. It was believed that in this way all bacteria and microbes are destroyed., and the air with the smell of wood and burning is very useful.

Now many adherents of the "smoke" bath are reappearing. They argue that such a bath is really real, and everything else that exists at the moment is only a parody and does not carry any value for health and pep.

To equip a bathhouse "in gray" a chimney pipe is added to the simplest design of the heater stove. Thus, smoke and carbon monoxide no longer enter the steam room, but at the same time the heater is mounted in such a way that the smoke comes out through the container with stones... In this case, after watering the stones, steam is obtained with an admixture of haze.

There will be no more soot in the bath, but the unique sauna atmosphere will remain. This option may be suitable for connoisseurs of a real Russian bath, who want to avoid the disadvantages of a “black” bath.

Bath "in white" will warm up longer than all of the above. But her dignity is that it keeps warm for a long time.

Hearth furnace - another original type of brick sauna stove. It differs from standard stoves in that air is supplied to the burning wood from above, and not from below. If, in the usual version, firewood is stacked on the grate and ignited from below, then in the hearth furnace, ignition is carried out from above and the direction of the draft will change from top to bottom... Such a device allows the firewood to burn evenly and maintain a certain temperature regime for a long time, in contrast to bottom burning stoves, where firewood flares up sharply and intensely, but burns out just as quickly.

The laying of firewood in the hearth furnace should be done in a certain way: large logs are laid on the very bottom, then medium ones, and very small chips are placed on the very top... When designing a stove with top combustion, you can refuse to install an ash pan, because with this method of stoking ash, after the end of combustion, you can simply sweep it with a broom on a scoop.

A metal stove is a fairly common option.... It has small dimensions, can be either square or round, heats up quickly and cools down quickly. Such a furnace can be bought ready-made, or it can be welded from steel sheets with little experience in welding. Moreover, you can make it yourself even from recycled material, for example, pipe scraps. It is easy to burn yourself on the metal, therefore, for safety reasons, you can enclose it with a layer of brick.

One of the varieties of a metal stove is a bath boiler... If a metal furnace can be of any shape and size, then a boiler is, as a rule, a cylindrical structure, small-sized. The boiler can be placed in a sauna room as a source of additional heating.

The implementation of such a design with your own hands occurs according to an algorithm that applies to all metal furnaces. A sheet of metal is cut in shape, the body is welded, a firebox and a stove, and a chimney are equipped. After that, the boiler can be overlaid with a brick so as not to risk being burned by a hot circuit.

The main technical element of the furnace is the firebox. It can be located both inside the steam room and outside.

If the firebox is inside a steam room, it can be convenient because you don't have to go far to add heat. But at the same time, given that, as a rule, the steam room is small, there is a huge risk of getting burned.

A remote firebox is a much more convenient and safer choice... In this case, there is a heater in the steam room, possibly with a water tank, and the furnace chamber is placed in the dressing room. Obviously, with this arrangement, the possibility of getting burned is minimized.

To install a heat exchanger for a bath - a special separately taken element for heating water, you need to focus on the location of the firebox, since it can be located in the chimney or in the furnace itself.

A real bathhouse, of course, is heated with wood. It is firewood that is an environmentally friendly material that creates the very healing atmosphere for which everything is started. But there are also exceptions.

The stove can run on gas, the "fuel" can be electrical energy, and in other cases, a liquid combustible substance such as diesel or diesel fuel. When working out such options it is important to remember that these foods are toxic and if the decision is made to heat the bath in this way, it is imperative to take the combustion system out into the street.

Electric oven - an interesting option for those who do not want to put a lot of effort into the preparation of the bath, do not like to follow the heating process. A possible disadvantage of such a furnace may be that it is completely not economical. But for those who are ready to sacrifice the atmosphere of a Russian bath in favor of convenience and comfort, this oven can be the perfect option. There will be no soot from such a stove, there is no need to arrange a chimney, and the most important advantage is that you can set exactly the heating temperature that will be ideal for you.

The electric furnace is purchased ready-made and installed according to the instructions. If everything is done correctly, such an oven will be absolutely safe in operation, the heating-cooling modes will be automatically regulated, and it is very convenient to control all its functions using the remote control.

Gas oven also has a lot of supporters. It is characterized by ease of installation, ease of maintenance, safe when used correctly and is very compact. This type of oven is equipped with a gas burner. There are models equipped with a water tank, a stone tray. In such a design, there is always a fuse that will not allow the gas to spread if the fire suddenly goes out.

When installing a gas oven, you must follow the safety rules. The main requirement is the remoteness of the walls of the furnace from the walls of the room (at least 50 cm). The foundation for the oven must exceed its perimeter by at least 10 cm... You also need to pay attention to the size of the burner - they must fit the size of the furnace. The main plus of the gas model is its efficiency and durability. Gas-fired ovens can last about 25 years.

The oven itself is a hazardous device, furnaces operating on diesel fuel, diesel fuel and mining have a very high hazard class... Moreover, such a stove is the only option that can very quickly warm up a very frozen room, which can be a great advantage for those who visit a summer cottage several times during the winter, for example.

A diesel-powered furnace can be double-circuit, wick and drip. Double-circuit is a kind of heat gunthat instantly warms up even the coldest room. The fuel consumption for it is very high, so this type of stove is not particularly relevant for installation in a bath.

The wick stove is more of a travel design... If there is a desire to use it for heating, you need to make sure that all its parts are made of high-quality materials and are carefully fitted to each other. But such a device has very little power in any case.

A diesel-powered drip furnace is the best option, which can be used for a bath room.

The principle of operation of such an apparatus is that fuel is dripping into a container with a hot evaporator. The furnace is started with a lit wick, the evaporator is heated. After the wick is almost completely burned out, droplets of fuel are launched. Once in the evaporator container, the drops boil and steam ignites, releasing heat.

The existing the stove - "potbelly stove" can be successfully remade for this type of fuel... It is imperative to carry out all work in strict accordance with the scheme, performed in compliance with all safety requirements.

The next important characteristic of a sauna stove is the type of heater device, which determines the way the stones are heated, and therefore the temperature and steam in the room. Everything is simple here.

The heater can be open or closed.... In the open type, stones are placed above the fuel compartment. It is on them that hot water is poured in order to obtain steam. This is suitable for small spaces, because the stove cools down quickly when the stones are frequently watered. If the oven is equipped with a water tank, this design will be more convenient, since everything will be at hand.

A closed type of heater is a better option for many reasons.In this design, the stones are located behind the door. It will take more time to warm up the bath, but the stones can store heat for up to a day.

In a closed type, the fuel compartment is located outside the room, thus excluding the possibility of carbon monoxide gases entering the steam room. The entire oven heats up in the same way, which creates a soft atmosphere of uniform heat. With this arrangement of stones, there is less possibility of scalding with hot steam when watering them.... Behind a closed door, stones keep their warmth for a long time, so the temperature in the bath will remain high for a long time.

There are also author's models of stoves that can be purchased and installed. These are standard designs that have been improved in various ways. For example, a water oven, which retains a sufficient amount of oxygen in the steam room due to a water layer that is laid in the walls of the oven.

The Kurin stove is a type of brick stove for a bath, which has its own device characteristics for more comfortable and uniform heating of the bath room.

It is easier to make a metal stove with your own hands, but with a strong desire and patience, you can also make a brick one. Before starting construction, you need to have a general idea of ​​the basic requirements for the construction of a stove for a bath room.

The stove must be installed against a wall that is located opposite the one that is equipped with shelves.... The chimney pipe cannot be designed to be able to adhere to the ceiling surfaces, it is necessary to leave a gap, which will then be filled with refractory material and covered with a protective cover. A sheet of metal is laid on the floor in front of the fuel chamber to protect the room from the possibility of firewhen the coals come out of the stove.

The most common designs of brick sauna stoves, which you can make yourself, also differ in the location of the tank for heating water. There are ovens with a bottom-mounted tank and ovens with a top-mounted tank.

Before starting the construction of the furnace, you need to prepare the necessary materials:

• the brick itself;
• clay and sand;
• a bowl for mixing the solution;
• tools for marking and masonry;
• insulating materials;
• separately, you need to prepare materials for creating a tank for chimney water, if you decide to do them yourself. You can also buy them ready-made.

To build a stove to be installed in the sauna room, brick must be purchased of a higher quality than usual for construction... It must also be refractory and have clear shapes and uniform dimensions.

So-called fireclay brick - according to its parameters, the most suitable option for a stovestanding in the bath, but it must also be borne in mind that its cost will be much higher than an ordinary brick, therefore, it is possible to use it partially, in the most significant places, for example, for a firebox - the place of greatest heating. And for the outer walls, chimney and decoration, ordinary red brick can be used, but not of poor quality.

You can easily check the capabilities of a brick, knowing a few simple ways. Sound will be the first guideline parameter. If you hit it with a hammer, the sound emanating from the surface should turn out to be sonorous and clear. If the sound is dull and seems to go inward, there is a high probability that there are cracks inside the brick that make the brick fragile and fragile. In this case, your oven runs the risk of collapse after a short period of use.

The second indicator is the appearance of the brick. According to the standards, the brick should have dimensions 250 * 120 * 65... A deviation within the normal range is considered to be 2 mm. There should be no visible defects, cracks or chips on the brick. A slight presence of grooves is allowed. Sometimes a film-like plaque can be seen on the surface of the product.Such a brick should be discarded, since this indicates a defect in production. Such a brick will not fix in the right place, since the film will interfere with the necessary adhesion.

The third landmark is inside the brick. In the literal sense, the brick must be broken into two parts and carefully examine the surface of the chip. The color should be uniform and not have darker streaks or blotches. Their presence indicates a violation of the technology in the manufacture, brick burnout. It is categorically not recommended to use such a brick for the construction of a sauna stove.

The foundation should be approximately 10-12 centimeters larger than the oven... It is covered with a beam of concrete or steel and a deck will be installed on top of this floor.

Next, you need to prepare a solution that will adhere the bricks to each other. For the mixture, you need clay, sand and water. It is advisable to use clay the same as the one used in the manufacture of bricks.... It must be mixed with water and left for a day. Sand is added last. The consistency should be smooth and thick.

To understand if the mixture has been prepared correctly, you need to move it to the side with a trowel over the surface. The mixture should not crack, blur, stick to the trowel, the solution should keep its shape well... There is one more way. The wooden stick must be dipped in the solution. The layer of the mixture that has settled on the stick should be no more, but not less than 2 mm. It is better to prepare the solution in small portions.making a new portion after using the previous one.

After installing the foundation, starting the masonry, you need to have before your eyes the drawings, according to which the work will be carried out. A pre-prepared scheme according to which the brick laying will be carried out will greatly simplify and streamline the process.

The order of laying bricks is standard and rarely done otherwise. The first rows of bricks are laid, as a rule, in a continuous layer, this will be the so-called stove cushion. Two rows will be enough... The third row begins to be laid, based on the drawing. The grate, the blower door and the ash compartment are usually laid here. The blower door is installed using galvanized wire. The door is fixed in the middle of the wall, and its lower segments are laid out on the surface of a row of bricks. The wire is hidden in grooves made on the surface of the bricks. And the upper part of the door will be fixed in the sixth row of bricks.

Next, four rows of bricks are stacked in a row. Here you need to pay close attention to the alignment of the corners... The correct installation of the ash pan and grate depends on this. If even one corner is incorrect, there will be a possibility of smoke entering the steam room.... After laying continuous rows, the top of the blower door is attached, on the sixth row of masonry.

The seventh row of bricks is the level at which the firebox door and grate are installed. The grate grate should be at the same level with the brickwork; for this, recesses are made in the bricks along the height of the grate rods. The grill is fastened with a solution. The grate is tightly applied to the mixture layer and tapped with a hammer for a stronger grip. The grate must not be allowed to come into contact with the walls of the stove., because the grate when heated will increase in size and create pressure on the side surfaces, which is fraught with the destruction of the furnace. The firebox door is attached in the same way as the blower door.

Next, you need to make an opening for the water tank. Considering that the tank will come into contact with the brick in some places, for the best fastening, you need to wrap the tank with an asbestos wire cord. The tank is located on the side walls.

From the next row of masonry, namely the eighth, the chimney will begin, therefore it is necessary to install a partition there. In the ninth row, the water tank itself is already mounted and the plate is installed. Further, the brick is installed along the height of the firebox and after that the chimney is laid out according to the scheme.

Metal stoves have their own undeniable advantages. For example, easy to install and quick heat up. This also includes small size and aesthetic appearance. But with all the advantages, one must not forget that a metal stove will be more demanding in terms of safety. Therefore, when planning the installation of a metal stove, you must strictly follow the instructions and follow all installation rules.

The stove is installed at a distance of at least 0.5 meters from walls and interior items.

The ceiling and walls of the bath must be protected from fire by laying an insulating material or by finishing with bricks and / or metal sheets.

Masonry or masonry can be laid over the oven walls to reduce the risk of burns. An additional advantage of such a cladding will be an increase in the time of keeping heat in the oven.

Since the metal oven is lightweight, it is usually not necessary to build a separate foundation. Such a need may arise when the kiln weighs more than 750 kg. In other cases, it is enough to lay a sheet of metal in place of the future stove or even lay ordinary ceramic tiles. This layer is made for fire safety purposes.

The oven itself can be purchased ready-made, but with at least a little knowledge and skills, you can weld it yourself from sheets of metal.

In the case of a furnace for installation in a bath, you need to understand that the metal must be tested for strength and possible deformation when exposed to high temperatures. In order to avoid such surprises, it is necessary to heat the metal sheets red-hot and see what happens to the sheet.... It can grow in size and lose its smoothness. Then the sheet is tapped with a hammer in the places of the hillocks and depressions to its original appearance, and the excess is cut off. Such preparation will prevent the oven from warping during operation.

A metal stove most often does not provide a water tank in its design. Since the oven itself is small in size, the additional capacity will make the structure more cumbersome, depriving this option of its obvious advantage for small rooms. But of course, if necessary and desired, a tank can also be provided.

Anyway, the container must be selected in small sizes, since it must have time to warm up in a short time.

The stove in such a stove can be internal or external. If the heater is installed outside, water can be poured over it to generate steam. It looks aesthetically pleasing and beautiful, warms up to high temperatures.

An internal heater allows the stones to warm up more, accordingly, they will retain heat longer, but in this case the chimney path will run in the same place and there will be a need for periodic deep cleaning of the stove from the settling combustion products.

The stones themselves are of great importance for a home-made metal stove. Granite cobblestones are absolutely inappropriate material... They contain inclusions of mica, which, when heated, release toxic substances. Inhalation of these poisonous vapors is extremely hazardous to health. Best of all for a bath are ordinary natural stones, rounded, of about the same size, without cracks and chips.

In specialized stores you can buy cobblestones made of basalt or jadeite, which are perfect for a sauna stove.

In addition to choosing the right stones, it is important to fold them correctly. The largest and heaviest ones should be placed on the bottom of the stove, taking into account their shape.... If the stones are oblong, they are laid vertically so that the heat going up can freely pass along the surface of the stone. If you neglect this rule, a natural barrier will arise for the heat and the lower stones will be very hot, while the upper ones will remain cold. On top of large stones, stones of medium size are laid out and then, with the top layer, small stones.

As in the case with other types of stoves, in the manufacture of a metal stove, the firebox can be constructed in one piece. This design is installed directly in the steam room. This option is the simplest. A large number of drawings and diagrams are available for those who wish. The version with a remote firebox is more laborious, but with a sufficient supply of patience, it can be fully implemented.

An important point is the design of the chimney when installing a metal stove. This compartment must be insulated. It is best to lay an insulating sheet between the inner and outer casing of the pipe.

Metal stoves have one interesting feature. The design of the firebox of most stoves is such that it allows you to get maximum heat in a minimum of time due to the rapid burning of firewood.

A situation arises when the wood burns out and warms up the stove to high temperatures that cannot be controlled. This happens because, as a standard, the furnace is equipped with a grate, which is designed to enhance combustion by supplying additional air, and therefore oxygen through its grates. With such a device, the top of the furnace heats up very much, while the bottom and sides are very slightly... There are additional inconveniences in operation, because there is little pleasure - instead of bath procedures, to deal with the regulation of the flame.

After such actions, the wood in the stove will quietly burn out for an hour or more, and the stove itself will warm up evenly. So a simple but effective design adjustment will make the metal oven as convenient as possible.

The most common model of a bath metal stove is a "potbelly stove"... Such a furnace is mobile, the easiest to manufacture and operate, and is familiar even to those who are far from furnace work.

This design contains all the key elements:

• foundation;
• firebox and blower;
• grate;
• inner heater;
• chimney;
• container for water.

Near the stove it is quite possible to equip a place for storing firewood.

For the installation of the simplest version of this furnace, you will need a welding machine, a piece of pipe with thick walls or a barrel as the body of the furnace and a container for water, a pipe for a chimney, a grate or rods for its manufacture, an insulating material.

First, we prepare the base. To do this, you need to free up a section of the floor and dig a pit about 50 cm deep. Its size should be the size of the furnace with an additional 30 cm around the perimeter. A layer of crushed stone or crushed brick is lined at the bottom, after which it is poured with a layer of concrete. The next layer is a roofing sheet. It will not be superfluous to lay it in two layers, but only after the concrete is completely dry.

Two layers of refractory bricks are placed on the roofing felt sheets. The first layer is on the edge.Fired brick will create good protection of the foundation from moisture and the effects of high temperatures.

The next stage is the assembly of the fuel compartment. The pipe, which will be used for the firebox, is cut on both sides to eventually get the cylinder. In this cylinder, you need to cut a hole into which the firebox and blower will be installed. Inside the pipe, you need to weld fasteners for the grate grate. The grate itself must also be welded from metal rods.

Next, you need to prepare two circles cut from metal sheets, weld them to the top of the pipe, one and below the other, having previously made a hole for installing the future chimney. Doors are made from the remains of metal.

For the correct operation of the chimney, you must follow the sequence of its installation. The inner part must be welded to the stove and a water tank must be installed on top so that the chimney pipe passes through the container. A tap must be inserted into one of the walls of the container. The rest of the length of the pipe must be taken out of the room. It is also necessary to insert a valve into the chimney pipe, which looks like a metal rod with a circle attached to it. By turning the valve, the incoming air can be controlled.

Sometimes it is more expedient to install a container for water near the stove.... In this case, the tank and the fuel compartment are connected by metal pipes for circulation. This design allows you to mount a stone box above the firebox, that is, to build a full-fledged heater.

In addition to brick ovens and basic metal models, there are also the most simplified devices for heating a bath. You can build them from improvised means with minimal effort. Of course, you need to understand that such structures are unlikely to be distinguished by special beauty or to ennoble the interior, but if the goal is only to heat the room, it is quite acceptable to use such options.

When planning to build such a furnace, it is advisable to prepare a drawing or diagram according to which it will be assembled.

An interesting version of the stove can be obtained from unnecessary rims.... Such a heating element is simple to design, takes up little space, heats up quickly and gives off heat well. In addition, such a stove will be strong, durable and, if desired, it can be heated not only with wood, but also with coal.

The disadvantages are those that are inherent in all metal stoves - rapid cooling and the likelihood of getting burned from accidentally touching the wall. Also it must be borne in mind that due to its small size, such a furnace can warm up a small room, ideally no more than 14-15 sq. m, this design is not suitable for heating rooms of a larger area.

The body of the device requires 4 disks from the truck, which must be prepared in advance - cleaned of dirt, possibly using an emery cloth. For two discs, you need to remove the middle, leaving only the rims. They will be used as a water bottle. To do this, they need to be welded together and a metal cover for filling water should be attached to the upper part, and a metal sheet should be attached to the bottom of the structure, in which there should be a hole for the chimney. The resulting container must be airtight. It is necessary to check and eliminate deficiencies, if any.

The remaining two discs are used to make a fuel compartment and a heater. In one disc, you need to leave the central part, it will play the role of a grate grate. The second disc must be freed from the central segment, then when welding two parts, the second will serve as a container for stones.

All parts of the furnace are assembled according to the scheme, after which the furnace is installed on a previously prepared foundation.

A stove from a worn-out iron barrel can also be a good option for small steam rooms.... To install such a furnace, first of all, you need to put a foundation.It should be a concrete or brick base that is highly fire resistant.

The barrel must be cut with a grinder to the required length. After that, a brick is laid out from the inside. The fuel compartment is highlighted with metal profiles. Stones are poured on them. After that, a lid with a welded smoke pipe is installed on the barrel.

When planning the construction of a sauna stove, it is important to correctly assess your strengths and capabilities. Of course, a hand-made stove will heat not only the body, but also the soul. But in order for such an exciting and rewarding activity to bring pleasure, you need a serious approach.

Sauna stove manufacturers offer a wide range of ready-made devices that only require installation. If, nevertheless, you are puzzled by the construction of a stove with your own hands, you must definitely take into account all the tips and recommendations.

It is necessary to foresee in advance how the issue of ventilation in the bath will be solved. Correct chimney design will avoid smoke leaks and carbon monoxide poisoning.

Take a close look at your family's needs in terms of bathing procedures. Based on this information, you can decide in favor of which stove to make a choice. The metal stove will quickly heat up the steam room, and if in your case the duration of the bath procedures is a couple of hours, then it makes sense to install a metal structure.

For lovers of steam, a brick oven will be a more suitable option.as it keeps warm for a long time and generates soft comfortable steam.

The metal walls of the stove can be overlaid with brickwork, you get a kind of middle version, which has the advantages of both a brick and a metal stove

An excellent bath solution would be to purchase a cast iron finished stove. with the subsequent facing of its walls with bricks. The steam from such a stove will be pleasant and dense, and the stove itself will last a long time. Another plus of this option is fast heating. But you need to remember that such a stove is not installed directly in the steam room. Her firebox should be in the dressing room.

It is good when the stove is designed in such a way that both types of stove are present - closed and open. So there are more opportunities to bring the steam room to the desired temperature. The stove can be designed as a net filled with stones. Less metal means less hot heat.

The stones can be placed in a certain way in the form of a well, so that water can be poured directly into the designed recess. This will produce a large quantity of good quality steam.

The best fuel for a bath will be birch firewood.... They burn evenly and leave little waste. When burned, coniferous trees clog the chimney very strongly. It is better not to use them.

The volume of the water tank, as a rule, is calculated from the amount of 10 liters for washing one person.

Clay for the mortar used for laying bricks can be completely used natural, collected on the banks of reservoirs. It needs to be soaked for several days to cleanse it of possible impurities.

Paying attention to all the subtleties and nuances of the stove business, you can build a device that will bring joy and health.

See the next video for a master class on making a stove.